Ich habe folgendes Problem:
Ich habe mehrere Hue Lampen bei mir Zuhause im Einsatz und wollte diese als Test mit dem Ambillight programmieren.
Dies hat auch funktioniert (hier meine hyperionhue.config.json file):
Code: Alles auswählen
// Automatically generated configuration file for 'Hyperion daemon'
// Generated by: HyperCon (The Hyperion deamon configuration file builder
{
/// Device configuration contains the following fields:
/// * 'name' : The user friendly name of the device (only used for display purposes)
/// * 'type' : The type of the device or leds (known types for now are 'ws2801', 'ldp8806',
/// 'lpd6803', 'sedu', 'adalight', 'lightpack', 'test' and 'none')
/// * 'output' : The output specification depends on selected device. This can for example be the
/// device specifier, device serial number, or the output file name
/// * 'rate' : The baudrate of the output to the device
/// * 'colorOrder' : The order of the color bytes ('rgb', 'rbg', 'bgr', etc.).
"device" :
{
"name" : "MyHyperionConfigHue",
"type" : "philipshue",
"output" : "192.16*****",
"transitiontime" : 1,
"switchOffOnBlack" : true,
"username" : "wvQ0G4FLbKJcyDJ3aXUTbpQODg***********",
"lightIds" : [8,9,10,11,12,13,14,15],
"colorOrder" : "rgb"
},
/// Color manipulation configuration used to tune the output colors to specific surroundings.
/// The configuration contains a list of color-transforms. Each transform contains the
/// following fields:
/// * 'id' : The unique identifier of the color transformation (eg 'device_1') /// * 'leds' : The indices (or index ranges) of the leds to which this color transform applies
/// (eg '0-5, 9, 11, 12-17'). The indices are zero based. /// * 'hsv' : The manipulation in the Hue-Saturation-Value color domain with the following
/// tuning parameters:
/// - 'saturationGain' The gain adjustement of the saturation
/// - 'valueGain' The gain adjustement of the value
/// * 'red'/'green'/'blue' : The manipulation in the Red-Green-Blue color domain with the
/// following tuning parameters for each channel:
/// - 'threshold' The minimum required input value for the channel to be on
/// (else zero)
/// - 'gamma' The gamma-curve correction factor
/// - 'blacklevel' The lowest possible value (when the channel is black)
/// - 'whitelevel' The highest possible value (when the channel is white)
///
/// Next to the list with color transforms there is also a smoothing option.
/// * 'smoothing' : Smoothing of the colors in the time-domain with the following tuning
/// parameters:
/// - 'type' The type of smoothing algorithm ('linear' or 'none')
/// - 'time_ms' The time constant for smoothing algorithm in milliseconds
/// - 'updateFrequency' The update frequency of the leds in Hz
"color" :
{
"transform" :
[
{
"id" : "default",
"leds" : "*",
"hsv" :
{
"saturationGain" : 1.0000,
"valueGain" : 1.0000
},
"red" :
{
"threshold" : 0.0000,
"gamma" : 1.0000,
"blacklevel" : 0.0000,
"whitelevel" : 1.0000
},
"green" :
{
"threshold" : 0.0000,
"gamma" : 1.0000,
"blacklevel" : 0.0000,
"whitelevel" : 1.0000
},
"blue" :
{
"threshold" : 0.0000,
"gamma" : 1.0000,
"blacklevel" : 0.0000,
"whitelevel" : 1.0000
}
}
],
"smoothing" :
{
"type" : "none",
"time_ms" : 200,
"updateFrequency" : 20.0000
}
},
/// The configuration for each individual led. This contains the specification of the area
/// averaged of an input image for each led to determine its color. Each item in the list
/// contains the following fields:
/// * index: The index of the led. This determines its location in the string of leds; zero
/// being the first led.
/// * hscan: The fractional part of the image along the horizontal used for the averaging
/// (minimum and maximum inclusive)
/// * vscan: The fractional part of the image along the vertical used for the averaging
/// (minimum and maximum inclusive)
"leds" :
[
{
"index" : 0,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.1000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 1.0000 }
},
{
"index" : 1,
"hscan" : { "minimum" : 0.9000, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 1.0000 }
}
],
/// The black border configuration, contains the following items:
/// * enable : true if the detector should be activated
/// * threshold : Value below which a pixel is regarded as black (value between 0.0 and 1.0)
"blackborderdetector" :
{
"enable" : true,
"threshold" : 0.01
},
/// The configuration of the effect engine, contains the following items:
/// * paths : An array with absolute location(s) of directories with effects
/// * bootsequence : The effect selected as 'boot sequence'
"effects" :
{
"paths" :
[
"/opt/hyperion/effects"
]
},
"bootsequence" :
{
"effect" : "Rainbow swirl fast",
"duration_ms" : 3000
},
/// The configuration for the frame-grabber, contains the following items:
/// * width : The width of the grabbed frames [pixels]
/// * height : The height of the grabbed frames [pixels]
/// * frequency_Hz : The frequency of the frame grab [Hz]
"framegrabber" :
{
"width" : 64,
"height" : 64,
"frequency_Hz" : 5.0
},
/// The configuration of the XBMC connection used to enable and disable the frame-grabber. Contains the following fields:
/// * xbmcAddress : The IP address of the XBMC-host
/// * xbmcTcpPort : The TCP-port of the XBMC-server
/// * grabVideo : Flag indicating that the frame-grabber is on(true) during video playback
/// * grabPictures : Flag indicating that the frame-grabber is on(true) during picture show
/// * grabAudio : Flag indicating that the frame-grabber is on(true) during audio playback
/// * grabMenu : Flag indicating that the frame-grabber is on(true) in the XBMC menu
/// * grabScreensaver : Flag indicating that the frame-grabber is on(true) when XBMC is on screensaver
/// * enable3DDetection : Flag indicating that the frame-grabber should switch to a 3D compatible modus if a 3D video is playing
"xbmcVideoChecker" :
{
"xbmcAddress" : "127.0.0.1",
"xbmcTcpPort" : 9090,
"grabVideo" : true,
"grabPictures" : true,
"grabAudio" : false,
"grabMenu" : false,
"grabScreensaver" : false,
"enable3DDetection" : true
},
/// The configuration of the Json server which enables the json remote interface
/// * port : Port at which the json server is started
"jsonServer" :
{
"port" : 19444
},
/// The configuration of the Proto server which enables the protobuffer remote interface
/// * port : Port at which the protobuffer server is started
"protoServer" :
{
"port" : 19445
},
/// The configuration of the boblight server which enables the boblight remote interface
/// * port : Port at which the boblight server is started
// "boblightServer" :
// {
// "port" : 19333
// },
"endOfJson" : "endOfJson"
Dies funktioniert nach einem Neustart des Raspberrys auch allerdings nur auf 2 (und zwar 10 und 11) Lampen alle anderen bleiben dunkel.
Hier noch die hyperion.log:
Code: Alles auswählen
Hyperion Ambilight Deamon (530)
Version : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388
Build Time: Jun 3 2017 02:06:37
INFO: Selected configuration file: /storage/.config/hyperionhue.config.json
HYPERION INFO: ColorTransform 'default' => [0; 1]
LEDDEVICE INFO: configuration:
{
"colorOrder" : "rgb",
"lightIds" : [ 8, 9, 10, 11, 12, 13, 14, 15 ],
"name" : "MyHyperionConfigHue",
"output" : "192.168.192.3",
"switchOffOnBlack" : true,
"transitiontime" : 1,
"type" : "philipshue",
"username" : "wvQ0G4FLbKJcyDJ3aXUTbpQODgbfQK2xf0FdQAqC"
}
HYPERION INFO: Not creating any smoothing
EFFECTENGINE ERROR: no effects found, check your effect directories
EFFECTENGINE INFO: Initializing Python interpreter
LedDevicePhilipsHue::saveStates(nLights=2): found light with id 10.
LedDevicePhilipsHue::saveStates(nLights=2): found light with id 11.
INFO: Hyperion started and initialised
INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
EFFECTENGINE ERROR: effect Rainbow swirl fast not found
failed
INFO: Kodi checker created and started
INFO: Json server created and started on port 19444
INFO: Proto server created and started on port 19445
DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080
BLACKBORDER INFO: threshold set to 0.01 (3)
BLACKBORDER INFO: mode:default
INFO: Frame grabber created and started
KODICHECK ERROR: Kodi Connection error (0)
BORDER SWITCH REQUIRED!!
CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
KODICHECK ERROR: Kodi Connection error (0)
KODICHECK ERROR: Kodi Connection error (0)
KODICHECK ERROR: Kodi Connection error (0)
KODICHECK ERROR: Kodi Connection error (0)
KODICHECK ERROR: Kodi Connection error (0)
Hatte jemand dieses Problem schon einmal oder kann mir vielleicht helfen?
Aus der Logfile geht ja hervor das er nur Lampe 10 und 11 findet mehr allerdings nicht ich kann aber durch die developers.meethue alle Lampen und bekomme da auch alle Lampen von 8-15 angezeigt und kann diese Steuern. Ich möchte eigentlich auch nicht alle Lampen einbinden (weil ich im Forum gelesen habe das die Bridge dies Hardware Technisch eh nicht auf die Reihe bekommt) in das Ambillight sondern vorerst nur den Lightstrip Nr.15 der hinter meinem Schreibtisch lebt und diesen dann sobald das System steht ersetzen durch ein Lightstrip hinter meinem Fernseh. Mir fehlt leider das Know How dies zu Fixen bzw. den Fehler zu erkennen.