Klar, einfach ausprobieren.
Wenn ich an den Stripes rum baue hab ich immer (!) die App nebenbei offen und nach jedem Lötvorgang getestet ob der neu angeschlossene Stripe reagiert.
der RPI war immer gestartet daneben, hab nur immer die Kabel getrennt beim löten, dann wieder ran und getestet.
Ich würde bei sowas nie alles anschließen und erst danach testen - sondern bei jedem Zwischenschritt.
Auf APA102 gewechselt... kein Ambilight mehr
Kein Support per PM!
Auf APA102 gewechselt... kein Ambilight mehr
ja muss denke ich die farborder noch in der config ändern.
grün ist momentan z.b. als rot angezeigt und blau ist grün
grün ist momentan z.b. als rot angezeigt und blau ist grün
Auf APA102 gewechselt... kein Ambilight mehr
Wenn du schon die Farben anpassen kannst, dann stimmt die Verkabelung jetzt. Alles andere ist Frage der Einstellungen. 
Wenn alle LEDs weiß leuchten, dann funktionieren alle LEDs richtig.
Wenn alle LEDs weiß leuchten, dann funktionieren alle LEDs richtig.Auf APA102 gewechselt... kein Ambilight mehr
Ja hab noch von rgb auf bgr umstellen müssen und auf Counter clock wise. Bei Standbildern (nur rot, grün,blau,Weiß) passen die Farben perfekt mit den Setting.
Später noch etwas tunnen aber sonst läuft alles.
Am Wochenende mal die Version für alle Geräte erweitern.
Danke nochmal für die Hilfe!
Später noch etwas tunnen aber sonst läuft alles.
Am Wochenende mal die Version für alle Geräte erweitern.
Danke nochmal für die Hilfe!
Auf APA102 gewechselt... kein Ambilight mehr
Sollte wohl so sein. Einfach mit der Hyperion App experimentieren und schauen. Da es selbst von WS2801 zu WS2801 unterschiede bei den Farben gibt, wird das bei APA nicht anders sein. Meine ersten WS2801 waren RGB und haben überhaupt keine Kalibrierung benötigt, waren Super, aber die LEDs sind bei einer Neuverkabelung gestorben.
Das zweite Band ist hingegen so besch... gewesen, dass ich ewig rumhantieren musste, um überhaupt weiß darstellen zu können. Mal sehen, ob ich die nicht einfach zum Beleuchten des Balkons nehme und für den TV ggf. neue APA mit 60/m
Das zweite Band ist hingegen so besch... gewesen, dass ich ewig rumhantieren musste, um überhaupt weiß darstellen zu können. Mal sehen, ob ich die nicht einfach zum Beleuchten des Balkons nehme und für den TV ggf. neue APA mit 60/m
Auf APA102 gewechselt... kein Ambilight mehr
ja die apa102 die ich jetzt habe sind farblich weitaus besser als die ws2801 die ich vorher hatte.
die ws2801 kommen jetzt ins schlafzimmer
die ws2801 kommen jetzt ins schlafzimmer
Auf APA102 gewechselt... kein Ambilight mehr
Die APAs wirken vermutlich auch "heller", weil es mehr LEDs auf den Meter gibt. Mehr Leuchtquellen = mehr "Licht"
Auf APA102 gewechselt... kein Ambilight mehr
das letzte stück am stripe bleibt dunkel... könnte das evtl an zu wenig spannung liegen?
wenn ich dort nochmal 5v und gnd anschliesse sollte es dann gehen?
wenn ich dort nochmal 5v und gnd anschliesse sollte es dann gehen?
Auf APA102 gewechselt... kein Ambilight mehr
ja lag daran...spannung ging in der vorletzten stripe schon auf knappe 3 volt runter (dadurch war weiß ehr gelb) hab jetzt diesesen adapter gebastelt den ich einfach am ende des stripe rangemacht habe und jetzt ist alles gleichmässig hell und durchgehend 5v spannung egal wo ich am stripe messe
- Dateianhänge
-
Auf APA102 gewechselt... kein Ambilight mehr
@b2un0 du meinstest die eckverbinder würden die stripes zerstören wegen dem metal? hast du dir mal meinen auf dem bild angesehen? sollte ich die metalbrücke am "schnapper" rausziehen? oder meintest du was anderes?
- Dateianhänge
-
Zuletzt geändert von TESLA am 19. Apr 2016, 15:00, insgesamt 1-mal geändert.
Auf APA102 gewechselt... kein Ambilight mehr
Wenn alles funktioniert lass es so.
Die Verbinder scheinen zumindest bei den APA LEDs nichts mehr kaputt zu machen - bei den WS2801er Stripes darf man die aber so auf keinen Fall verwenden da du dir damit die Leiterbahnen zerstörst.
Dadurch das aber bei den APA alles in/unter der LED Ist scheint das kein Problem mehr zu sein.
Die Verbinder scheinen zumindest bei den APA LEDs nichts mehr kaputt zu machen - bei den WS2801er Stripes darf man die aber so auf keinen Fall verwenden da du dir damit die Leiterbahnen zerstörst.
Dadurch das aber bei den APA alles in/unter der LED Ist scheint das kein Problem mehr zu sein.
Kein Support per PM!
Auf APA102 gewechselt... kein Ambilight mehr
okay. ja laut verkäufer sind die auch für apa ausgelegt und auf nachfrage meinte er das nichts kaputt gehen sollte.
aber wir alle kennen ja die verkäufer
danke dir! schönen tag noch!
aber wir alle kennen ja die verkäufer
danke dir! schönen tag noch!
Auf APA102 gewechselt... kein Ambilight mehr
Habe das ganze jetzt auf alle quellen erweitert und irgendwie sehen die farben bei der externen quelle (xbox one) merkwürdig aus bzw nicht richitg.
im Anhang ein paar screenshots und die grabber config
mich stört quasi das bei schwarz z.b. immer noch farben angezeigt werden (die verfälschten farben liegen an der handy kamera die ist im dunkelem raum mehr als mies)
muss ich hier evtl. noch im config tool was umstellen? evtl. das er einen größeren bereich erfasst?
beim normalen tv bild geht es bzw fällt es nicht auf....auch sonst die farben im spiel passen aber scheinbar wird das schwarz nicht richtig erkannt bzw zu gering.
im Anhang ein paar screenshots und die grabber config
mich stört quasi das bei schwarz z.b. immer noch farben angezeigt werden (die verfälschten farben liegen an der handy kamera die ist im dunkelem raum mehr als mies)
muss ich hier evtl. noch im config tool was umstellen? evtl. das er einen größeren bereich erfasst?
beim normalen tv bild geht es bzw fällt es nicht auf....auch sonst die farben im spiel passen aber scheinbar wird das schwarz nicht richtig erkannt bzw zu gering.
Code: Alles auswählen
// Automatically generated configuration file for 'Hyperion daemon'
// Generated by: HyperCon (The Hyperion deamon configuration file builder)
// Created with HyperCon V1.01.2 (31.03.2016)
{
/// Device configuration contains the following fields:
/// * 'name' : The user friendly name of the device (only used for display purposes)
/// * 'type' : The type of the device or leds (known types for now are
/// ---------SPI---------, APA102, WS2801, P9813, LPD6803, LPD8806, ---------PWM---------, WS2812b (just RPi1), WS281X (RPi1, RPi2, RPi3), --------OTHER--------, PhilipsHUE, AtmoOrb, PiBlaster, Tinkerforge, UDP, FadeCandy, SEDU, TPM2, USBASP-WS2801, USBASP-WS2812, ------3rd PARTY------, Adalight, AdalightAPA102, AmbiLed, Atmo, Lightpack, Multi-Lightpack, Paintpack, Test (file), None)
/// * [device type specific configuration]
/// * 'colorOrder' : The order of the color bytes ('rgb', 'rbg', 'bgr', etc.).
"device" :
{
"name" : "MyHyperionConfig",
"type" : "apa102",
"output" : "/dev/spidev0.0",
"rate" : 1000000,
"colorOrder" : "bgr"
},
/// Color manipulation configuration used to tune the output colors to specific surroundings.
/// The configuration contains a list of color-transforms. Each transform contains the
/// following fields:
/// * 'id' : The unique identifier of the color transformation (eg 'device_1') /// * 'leds' : The indices (or index ranges) of the leds to which this color transform applies
/// (eg '0-5, 9, 11, 12-17'). The indices are zero based. /// * 'hsv' : The manipulation in the Hue-Saturation-Value color domain with the following
/// tuning parameters:
/// - 'saturationGain' The gain adjustement of the saturation
/// - 'valueGain' The gain adjustement of the value
/// * 'red'/'green'/'blue' : The manipulation in the Red-Green-Blue color domain with the
/// following tuning parameters for each channel:
/// - 'threshold' The minimum required input value for the channel to be on
/// (else zero)
/// - 'gamma' The gamma-curve correction factor
/// - 'blacklevel' The lowest possible value (when the channel is black)
/// - 'whitelevel' The highest possible value (when the channel is white)
///
/// Next to the list with color transforms there is also a smoothing option.
/// * 'smoothing' : Smoothing of the colors in the time-domain with the following tuning
/// parameters:
/// - 'type' The type of smoothing algorithm ('linear' or 'none')
/// - 'time_ms' The time constant for smoothing algorithm in milliseconds
/// - 'updateFrequency' The update frequency of the leds in Hz
/// - 'updateDelay' The delay of the output to leds (in periods of smoothing)
"color" :
{
"correction" :
[
{
"id" : "default",
"leds" : "*",
"correctionValues" :
{
"red" : 255,
"green" : 255,
"blue" : 255
}
}
],
"temperature" :
[
{
"id" : "default",
"leds" : "*",
"temperatureValues" :
{
"red" : 255,
"green" : 255,
"blue" : 255
}
}
],
"transform" :
[
{
"id" : "default",
"leds" : "*",
"hsv" :
{
"saturationGain" : 1.0000,
"valueGain" : 1.0000
},
"hsl" :
{
"saturationGain" : 1.0000,
"luminanceGain" : 1.0000
},
"red" :
{
"threshold" : 0.0000,
"gamma" : 1.0000,
"blacklevel" : 0.0000,
"whitelevel" : 1.0000
},
"green" :
{
"threshold" : 0.0000,
"gamma" : 1.0000,
"blacklevel" : 0.0000,
"whitelevel" : 1.0000
},
"blue" :
{
"threshold" : 0.0000,
"gamma" : 1.0000,
"blacklevel" : 0.0000,
"whitelevel" : 1.0000
}
}
],
"smoothing" :
{
"type" : "linear",
"time_ms" : 100,
"updateFrequency" : 25.0000,
"updateDelay" : 0
}
},
/// The black border configuration, contains the following items:
/// * enable : true if the detector should be activated
/// * threshold : Value below which a pixel is regarded as black (value between 0.0 and 1.0)
/// * unknownFrameCnt : Number of frames without any detection before the border is set to 0 (default 600)
/// * borderFrameCnt : Number of frames before a consistent detected border gets set (default 50)
/// * maxInconsistentCnt : Number of inconsistent frames that are ignored before a new border gets a chance to proof consistency
/// * blurRemoveCnt : Number of pixels that get removed from the detected border to cut away blur (default 1)
/// * mode : Border detection mode (values=default,classic,osd)
"blackborderdetector" :
{
"enable" : true,
"threshold" : 0.01,
"unknownFrameCnt" : 600,
"borderFrameCnt" : 50,
"maxInconsistentCnt" : 10,
"blurRemoveCnt" : 1,
"mode" : "default"
},
/// The configuration of the effect engine, contains the following items:
/// * paths : An array with absolute location(s) of directories with effects
/// * color : Set static color after boot -> set effect to "" (empty) and input the values [R,G,B] and set duration_ms NOT to 0 (use 1) instead
/// * effect : The effect selected as 'boot sequence'
/// * duration_ms : The duration of the selected effect (0=endless)
/// * priority : The priority of the selected effect/static color (default=990) HINT: lower value result in HIGHER priority!
"effects" :
{
"paths" :
[
"/storage/hyperion/effects"
]
},
"bootsequence" :
{
"color" : [0,0,0],
"effect" : "Knight rider",
"duration_ms" : 3000,
"priority" : 990
},
/// The configuration of the Json/Proto forwarder. Forward messages to multiple instances of Hyperion on same and/or other hosts
/// 'proto' is mostly used for video streams and 'json' for effects
/// * proto : Proto server adress and port of your target. Syntax:[IP:PORT] -> ["127.0.0.1:19447"] or more instances to forward ["127.0.0.1:19447","192.168.0.24:19449"]
/// * json : Json server adress and port of your target. Syntax:[IP:PORT] -> ["127.0.0.1:19446"] or more instances to forward ["127.0.0.1:19446","192.168.0.24:19448"]
/// HINT: If you redirect to "127.0.0.1" (localhost) you could start a second hyperion with another device/led config!
/// Be sure your client(s) is/are listening on the configured ports. The second Hyperion (if used) also needs to be configured! (HyperCon -> External -> Json Server/Proto Server)
// "forwarder" :
// {
// "proto" : ["127.0.0.1:19447"],
// "json" : ["127.0.0.1:19446"]
// },
/// The configuration for the frame-grabber, contains the following items:
/// * width : The width of the grabbed frames [pixels]
/// * height : The height of the grabbed frames [pixels]
/// * frequency_Hz : The frequency of the frame grab [Hz]
/// * priority : The priority of the frame-gabber (Default=890) HINT: lower value result in HIGHER priority!
/// * ATTENTION : Power-of-Two resolution is not supported and leads to unexpected behaviour!
// "framegrabber" :
// {
// "width" : 80,
// "height" : 45,
// "frequency_Hz" : 10.0,
// "priority" : 890
// },
/// The configuration of the Kodi connection used to enable and disable the frame-grabber. Contains the following fields:
/// * xbmcAddress : The IP address of the Kodi-host
/// * xbmcTcpPort : The TCP-port of the Kodi-server
/// * grabVideo : Flag indicating that the frame-grabber is on(true) during video playback
/// * grabPictures : Flag indicating that the frame-grabber is on(true) during picture show
/// * grabAudio : Flag indicating that the frame-grabber is on(true) during audio playback
/// * grabMenu : Flag indicating that the frame-grabber is on(true) at the Kodi menu
/// * grabScreensaver : Flag indicating that the frame-grabber is on(true) when Kodi is on screensaver
/// * enable3DDetection : Flag indicating that the frame-grabber should switch to a 3D compatible modus if a 3D video is playing
// "xbmcVideoChecker" :
// {
// "xbmcAddress" : "127.0.0.1",
// "xbmcTcpPort" : 9090,
// "grabVideo" : true,
// "grabPictures" : true,
// "grabAudio" : true,
// "grabMenu" : true,
// "grabScreensaver" : true,
// "enable3DDetection" : true
// },
/// The configuration of the Json server which enables the json remote interface
/// * port : Port at which the json server is started
"jsonServer" :
{
"port" : 19444
},
/// The configuration of the Proto server which enables the protobuffer remote interface
/// * port : Port at which the protobuffer server is started
"protoServer" :
{
"port" : 19445
},
/// The configuration of the boblight server which enables the boblight remote interface
/// * port : Port at which the boblight server is started
/// * priority: Priority of the boblight server (Default=900) HINT: lower value result in HIGHER priority!
// "boblightServer" :
// {
// "port" : 19333,
// "priority" : 900
// },
/// Configuration for the embedded V4L2 grabber
/// * device : V4L2 Device to use [default="/dev/video0"]
/// * input : V4L2 input to use [default=0]
/// * standard : Video standard (no-change/PAL/NTSC) [default="no-change"]
/// * width : V4L2 width to set [default=-1]
/// * height : V4L2 height to set [default=-1]
/// * frameDecimation : Frame decimation factor [default=2]
/// * sizeDecimation : Size decimation factor [default=8]
/// * priority : Hyperion priority channel [default=900]
/// * mode : 3D mode to use 2D/3DSBS/3DTAB (note: no autodetection) [default="2D"]
/// * cropLeft : Cropping from the left [default=0]
/// * cropRight : Cropping from the right [default=0]
/// * cropTop : Cropping from the top [default=0]
/// * cropBottom : Cropping from the bottom [default=0]
/// * redSignalThreshold : Signal threshold for the red channel between 0.0 and 1.0 [default=0.0]
/// * greenSignalThreshold : Signal threshold for the green channel between 0.0 and 1.0 [default=0.0]
/// * blueSignalThreshold : Signal threshold for the blue channel between 0.0 and 1.0 [default=0.0]
"grabber-v4l2" :
{
"device" : "/dev/video0",
"input" : 0,
"standard" : "PAL",
"width" : -1,
"height" : -1,
"frameDecimation" : 2,
"sizeDecimation" : 8,
"priority" : 900,
"mode" : "2D",
"cropLeft" : 0,
"cropRight" : 0,
"cropTop" : 0,
"cropBottom" : 0,
"redSignalThreshold" : 0.0,
"greenSignalThreshold" : 0.0,
"blueSignalThreshold" : 0.0
},
/// The configuration for each individual led. This contains the specification of the area
/// averaged of an input image for each led to determine its color. Each item in the list
/// contains the following fields:
/// * index: The index of the led. This determines its location in the string of leds; zero
/// being the first led.
/// * hscan: The fractional part of the image along the horizontal used for the averaging
/// (minimum and maximum inclusive)
/// * vscan: The fractional part of the image along the vertical used for the averaging
/// (minimum and maximum inclusive)
"leds" :
[
{
"index" : 0,
"hscan" : { "minimum" : 0.5833, "maximum" : 0.6000 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 1,
"hscan" : { "minimum" : 0.6000, "maximum" : 0.6167 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 2,
"hscan" : { "minimum" : 0.6167, "maximum" : 0.6333 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 3,
"hscan" : { "minimum" : 0.6333, "maximum" : 0.6500 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 4,
"hscan" : { "minimum" : 0.6500, "maximum" : 0.6667 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 5,
"hscan" : { "minimum" : 0.6667, "maximum" : 0.6833 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 6,
"hscan" : { "minimum" : 0.6833, "maximum" : 0.7000 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 7,
"hscan" : { "minimum" : 0.7000, "maximum" : 0.7167 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 8,
"hscan" : { "minimum" : 0.7167, "maximum" : 0.7333 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 9,
"hscan" : { "minimum" : 0.7333, "maximum" : 0.7500 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 10,
"hscan" : { "minimum" : 0.7500, "maximum" : 0.7667 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 11,
"hscan" : { "minimum" : 0.7667, "maximum" : 0.7833 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 12,
"hscan" : { "minimum" : 0.7833, "maximum" : 0.8000 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 13,
"hscan" : { "minimum" : 0.8000, "maximum" : 0.8167 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 14,
"hscan" : { "minimum" : 0.8167, "maximum" : 0.8333 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 15,
"hscan" : { "minimum" : 0.8333, "maximum" : 0.8500 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 16,
"hscan" : { "minimum" : 0.8500, "maximum" : 0.8667 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 17,
"hscan" : { "minimum" : 0.8667, "maximum" : 0.8833 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 18,
"hscan" : { "minimum" : 0.8833, "maximum" : 0.9000 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 19,
"hscan" : { "minimum" : 0.9000, "maximum" : 0.9167 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 20,
"hscan" : { "minimum" : 0.9167, "maximum" : 0.9333 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 21,
"hscan" : { "minimum" : 0.9333, "maximum" : 0.9500 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 22,
"hscan" : { "minimum" : 0.9500, "maximum" : 0.9667 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 23,
"hscan" : { "minimum" : 0.9667, "maximum" : 0.9833 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 24,
"hscan" : { "minimum" : 0.9833, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 25,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.9706, "maximum" : 1.0000 }
},
{
"index" : 26,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.9412, "maximum" : 0.9706 }
},
{
"index" : 27,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.9118, "maximum" : 0.9412 }
},
{
"index" : 28,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.8824, "maximum" : 0.9118 }
},
{
"index" : 29,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.8529, "maximum" : 0.8824 }
},
{
"index" : 30,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.8235, "maximum" : 0.8529 }
},
{
"index" : 31,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.7941, "maximum" : 0.8235 }
},
{
"index" : 32,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.7647, "maximum" : 0.7941 }
},
{
"index" : 33,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.7353, "maximum" : 0.7647 }
},
{
"index" : 34,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.7059, "maximum" : 0.7353 }
},
{
"index" : 35,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.6765, "maximum" : 0.7059 }
},
{
"index" : 36,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.6471, "maximum" : 0.6765 }
},
{
"index" : 37,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.6176, "maximum" : 0.6471 }
},
{
"index" : 38,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.5882, "maximum" : 0.6176 }
},
{
"index" : 39,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.5588, "maximum" : 0.5882 }
},
{
"index" : 40,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.5294, "maximum" : 0.5588 }
},
{
"index" : 41,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.5000, "maximum" : 0.5294 }
},
{
"index" : 42,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.4706, "maximum" : 0.5000 }
},
{
"index" : 43,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.4412, "maximum" : 0.4706 }
},
{
"index" : 44,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.4118, "maximum" : 0.4412 }
},
{
"index" : 45,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.3824, "maximum" : 0.4118 }
},
{
"index" : 46,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.3529, "maximum" : 0.3824 }
},
{
"index" : 47,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.3235, "maximum" : 0.3529 }
},
{
"index" : 48,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.2941, "maximum" : 0.3235 }
},
{
"index" : 49,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.2647, "maximum" : 0.2941 }
},
{
"index" : 50,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.2353, "maximum" : 0.2647 }
},
{
"index" : 51,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.2059, "maximum" : 0.2353 }
},
{
"index" : 52,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.1765, "maximum" : 0.2059 }
},
{
"index" : 53,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.1471, "maximum" : 0.1765 }
},
{
"index" : 54,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.1176, "maximum" : 0.1471 }
},
{
"index" : 55,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0882, "maximum" : 0.1176 }
},
{
"index" : 56,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0588, "maximum" : 0.0882 }
},
{
"index" : 57,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0294, "maximum" : 0.0588 }
},
{
"index" : 58,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0294 }
},
{
"index" : 59,
"hscan" : { "minimum" : 0.9833, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 60,
"hscan" : { "minimum" : 0.9667, "maximum" : 0.9833 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 61,
"hscan" : { "minimum" : 0.9500, "maximum" : 0.9667 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 62,
"hscan" : { "minimum" : 0.9333, "maximum" : 0.9500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 63,
"hscan" : { "minimum" : 0.9167, "maximum" : 0.9333 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 64,
"hscan" : { "minimum" : 0.9000, "maximum" : 0.9167 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 65,
"hscan" : { "minimum" : 0.8833, "maximum" : 0.9000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 66,
"hscan" : { "minimum" : 0.8667, "maximum" : 0.8833 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 67,
"hscan" : { "minimum" : 0.8500, "maximum" : 0.8667 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 68,
"hscan" : { "minimum" : 0.8333, "maximum" : 0.8500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 69,
"hscan" : { "minimum" : 0.8167, "maximum" : 0.8333 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 70,
"hscan" : { "minimum" : 0.8000, "maximum" : 0.8167 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 71,
"hscan" : { "minimum" : 0.7833, "maximum" : 0.8000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 72,
"hscan" : { "minimum" : 0.7667, "maximum" : 0.7833 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 73,
"hscan" : { "minimum" : 0.7500, "maximum" : 0.7667 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 74,
"hscan" : { "minimum" : 0.7333, "maximum" : 0.7500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 75,
"hscan" : { "minimum" : 0.7167, "maximum" : 0.7333 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 76,
"hscan" : { "minimum" : 0.7000, "maximum" : 0.7167 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 77,
"hscan" : { "minimum" : 0.6833, "maximum" : 0.7000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 78,
"hscan" : { "minimum" : 0.6667, "maximum" : 0.6833 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 79,
"hscan" : { "minimum" : 0.6500, "maximum" : 0.6667 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 80,
"hscan" : { "minimum" : 0.6333, "maximum" : 0.6500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 81,
"hscan" : { "minimum" : 0.6167, "maximum" : 0.6333 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 82,
"hscan" : { "minimum" : 0.6000, "maximum" : 0.6167 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 83,
"hscan" : { "minimum" : 0.5833, "maximum" : 0.6000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 84,
"hscan" : { "minimum" : 0.5667, "maximum" : 0.5833 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 85,
"hscan" : { "minimum" : 0.5500, "maximum" : 0.5667 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 86,
"hscan" : { "minimum" : 0.5333, "maximum" : 0.5500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 87,
"hscan" : { "minimum" : 0.5167, "maximum" : 0.5333 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 88,
"hscan" : { "minimum" : 0.5000, "maximum" : 0.5167 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 89,
"hscan" : { "minimum" : 0.4833, "maximum" : 0.5000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 90,
"hscan" : { "minimum" : 0.4667, "maximum" : 0.4833 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 91,
"hscan" : { "minimum" : 0.4500, "maximum" : 0.4667 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 92,
"hscan" : { "minimum" : 0.4333, "maximum" : 0.4500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 93,
"hscan" : { "minimum" : 0.4167, "maximum" : 0.4333 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 94,
"hscan" : { "minimum" : 0.4000, "maximum" : 0.4167 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 95,
"hscan" : { "minimum" : 0.3833, "maximum" : 0.4000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 96,
"hscan" : { "minimum" : 0.3667, "maximum" : 0.3833 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 97,
"hscan" : { "minimum" : 0.3500, "maximum" : 0.3667 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 98,
"hscan" : { "minimum" : 0.3333, "maximum" : 0.3500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 99,
"hscan" : { "minimum" : 0.3167, "maximum" : 0.3333 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 100,
"hscan" : { "minimum" : 0.3000, "maximum" : 0.3167 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 101,
"hscan" : { "minimum" : 0.2833, "maximum" : 0.3000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 102,
"hscan" : { "minimum" : 0.2667, "maximum" : 0.2833 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 103,
"hscan" : { "minimum" : 0.2500, "maximum" : 0.2667 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 104,
"hscan" : { "minimum" : 0.2333, "maximum" : 0.2500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 105,
"hscan" : { "minimum" : 0.2167, "maximum" : 0.2333 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 106,
"hscan" : { "minimum" : 0.2000, "maximum" : 0.2167 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 107,
"hscan" : { "minimum" : 0.1833, "maximum" : 0.2000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 108,
"hscan" : { "minimum" : 0.1667, "maximum" : 0.1833 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 109,
"hscan" : { "minimum" : 0.1500, "maximum" : 0.1667 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 110,
"hscan" : { "minimum" : 0.1333, "maximum" : 0.1500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 111,
"hscan" : { "minimum" : 0.1167, "maximum" : 0.1333 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 112,
"hscan" : { "minimum" : 0.1000, "maximum" : 0.1167 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 113,
"hscan" : { "minimum" : 0.0833, "maximum" : 0.1000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 114,
"hscan" : { "minimum" : 0.0667, "maximum" : 0.0833 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 115,
"hscan" : { "minimum" : 0.0500, "maximum" : 0.0667 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 116,
"hscan" : { "minimum" : 0.0333, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 117,
"hscan" : { "minimum" : 0.0167, "maximum" : 0.0333 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 118,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0167 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0600 }
},
{
"index" : 119,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0303 }
},
{
"index" : 120,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.0303, "maximum" : 0.0606 }
},
{
"index" : 121,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.0606, "maximum" : 0.0909 }
},
{
"index" : 122,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.0909, "maximum" : 0.1212 }
},
{
"index" : 123,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.1212, "maximum" : 0.1515 }
},
{
"index" : 124,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.1515, "maximum" : 0.1818 }
},
{
"index" : 125,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.1818, "maximum" : 0.2121 }
},
{
"index" : 126,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.2121, "maximum" : 0.2424 }
},
{
"index" : 127,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.2424, "maximum" : 0.2727 }
},
{
"index" : 128,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.2727, "maximum" : 0.3030 }
},
{
"index" : 129,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.3030, "maximum" : 0.3333 }
},
{
"index" : 130,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.3333, "maximum" : 0.3636 }
},
{
"index" : 131,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.3636, "maximum" : 0.3939 }
},
{
"index" : 132,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.3939, "maximum" : 0.4242 }
},
{
"index" : 133,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.4242, "maximum" : 0.4545 }
},
{
"index" : 134,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.4545, "maximum" : 0.4848 }
},
{
"index" : 135,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.4848, "maximum" : 0.5152 }
},
{
"index" : 136,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.5152, "maximum" : 0.5455 }
},
{
"index" : 137,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.5455, "maximum" : 0.5758 }
},
{
"index" : 138,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.5758, "maximum" : 0.6061 }
},
{
"index" : 139,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.6061, "maximum" : 0.6364 }
},
{
"index" : 140,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.6364, "maximum" : 0.6667 }
},
{
"index" : 141,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.6667, "maximum" : 0.6970 }
},
{
"index" : 142,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.6970, "maximum" : 0.7273 }
},
{
"index" : 143,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.7273, "maximum" : 0.7576 }
},
{
"index" : 144,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.7576, "maximum" : 0.7879 }
},
{
"index" : 145,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.7879, "maximum" : 0.8182 }
},
{
"index" : 146,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.8182, "maximum" : 0.8485 }
},
{
"index" : 147,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.8485, "maximum" : 0.8788 }
},
{
"index" : 148,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.8788, "maximum" : 0.9091 }
},
{
"index" : 149,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.9091, "maximum" : 0.9394 }
},
{
"index" : 150,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.9394, "maximum" : 0.9697 }
},
{
"index" : 151,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.9697, "maximum" : 1.0000 }
},
{
"index" : 152,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0167 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 153,
"hscan" : { "minimum" : 0.0167, "maximum" : 0.0333 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 154,
"hscan" : { "minimum" : 0.0333, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 155,
"hscan" : { "minimum" : 0.0500, "maximum" : 0.0667 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 156,
"hscan" : { "minimum" : 0.0667, "maximum" : 0.0833 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 157,
"hscan" : { "minimum" : 0.0833, "maximum" : 0.1000 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 158,
"hscan" : { "minimum" : 0.1000, "maximum" : 0.1167 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 159,
"hscan" : { "minimum" : 0.1167, "maximum" : 0.1333 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 160,
"hscan" : { "minimum" : 0.1333, "maximum" : 0.1500 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 161,
"hscan" : { "minimum" : 0.1500, "maximum" : 0.1667 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 162,
"hscan" : { "minimum" : 0.1667, "maximum" : 0.1833 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 163,
"hscan" : { "minimum" : 0.1833, "maximum" : 0.2000 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 164,
"hscan" : { "minimum" : 0.2000, "maximum" : 0.2167 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 165,
"hscan" : { "minimum" : 0.2167, "maximum" : 0.2333 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 166,
"hscan" : { "minimum" : 0.2333, "maximum" : 0.2500 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 167,
"hscan" : { "minimum" : 0.2500, "maximum" : 0.2667 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 168,
"hscan" : { "minimum" : 0.2667, "maximum" : 0.2833 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 169,
"hscan" : { "minimum" : 0.2833, "maximum" : 0.3000 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 170,
"hscan" : { "minimum" : 0.3000, "maximum" : 0.3167 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 171,
"hscan" : { "minimum" : 0.3167, "maximum" : 0.3333 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 172,
"hscan" : { "minimum" : 0.3333, "maximum" : 0.3500 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 173,
"hscan" : { "minimum" : 0.3500, "maximum" : 0.3667 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 174,
"hscan" : { "minimum" : 0.3667, "maximum" : 0.3833 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 175,
"hscan" : { "minimum" : 0.3833, "maximum" : 0.4000 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
},
{
"index" : 176,
"hscan" : { "minimum" : 0.4000, "maximum" : 0.4167 },
"vscan" : { "minimum" : 0.9400, "maximum" : 1.0000 }
}
],
"endOfJson" : "endOfJson"
}
- Dateianhänge
-
-
-
-
-
-
Auf APA102 gewechselt... kein Ambilight mehr
Wie im Guide "Ambilight für alle Quellen" beschrieben kanns/solltest du natürlich für den Grabber die ganzen Tramsform Werte separat anpassen.
Ein einfaches übernehmen deiner Kodi Werte funktioniert nicht da dass Bild vom Grabber ja in ganz anderer Qualität vorliegt als wenn Hyperion selber direkt die Frame von Kodi nimmt.
Ein einfaches übernehmen deiner Kodi Werte funktioniert nicht da dass Bild vom Grabber ja in ganz anderer Qualität vorliegt als wenn Hyperion selber direkt die Frame von Kodi nimmt.
Kein Support per PM!