Benutzeravatar
michaelposch
Mitglied

Beiträge:22
Registriert:5. May 2016

Kurzes Leuchten der LEDs, danach nichts mehr

6. Mai 2016, 17:18

was meinst du Avalox2k?
das ist nur die IP Adresse vom raspberry

Avalox2k
Mitglied

Beiträge:357
Registriert:9. Feb 2016
Wohnort:Gera

Kurzes Leuchten der LEDs, danach nichts mehr

6. Mai 2016, 17:29

Na wenn alles auf dem gleichen pi läuft, warum nicht 127.0.0.1

Getippt mit meinem Galaxy S6 Edge+ mit Tapatalk
*** Raspberry PI 3 * Ambilight * IR Remote * WD MyCloud NAS ***

michaelposch
Mitglied

Beiträge:22
Registriert:5. May 2016

Kurzes Leuchten der LEDs, danach nichts mehr

6. Mai 2016, 20:10

weil die ip adresse vom router vergeben wird :roll:

Avalox2k
Mitglied

Beiträge:357
Registriert:9. Feb 2016
Wohnort:Gera

Kurzes Leuchten der LEDs, danach nichts mehr

6. Mai 2016, 20:25

Das hat doch nix mit dem Router zu tun. 127.0.0.1 ist der local host.

Gesendet von meinem Galaxy Tab S mit Tapatalk
*** Raspberry PI 3 * Ambilight * IR Remote * WD MyCloud NAS ***

michaelposch
Mitglied

Beiträge:22
Registriert:5. May 2016

Kurzes Leuchten der LEDs, danach nichts mehr

6. Mai 2016, 20:36

wo soll ich die adresse eingeben?

interessant ist jetzt:

jetzt werden die Hälfte der LEDs beleuchtet. beim starten wird auch der regenbogen gemacht.

hab mein raspi an einen externen monitor via hdmi angeschlossen. wenn ich im kodi dann
mit den pfeiltasten der angeschlossenen tastatur herumfahre, reagieren die leds drauf :shock:

michaelposch
Mitglied

Beiträge:22
Registriert:5. May 2016

Kurzes Leuchten der LEDs, danach nichts mehr

6. Mai 2016, 21:55

soooooo es funktioniert!!

ich hab die xml dateien hinzugefügt zum auswählen zwischen kodi und hdmi. funktioniert (Y)

jetzt möcht ich noch, dass das ambi auf hdmi automatisch startet, ich mach alles nach anleitung und wenn ich den
raspi neu starte, leuchten die leds nicht!

schau gerade ein fussballspiel und die leds wirken eher blau als grün?
noch zur info: die leds sind noch nicht am fernsehr angebracht, liegen noch am boden :D

cenyal
Mitglied

Beiträge:156
Registriert:25. Jan 2016

Kurzes Leuchten der LEDs, danach nichts mehr

7. Mai 2016, 05:59

Ändere dein Bytorder von RGB auf RBG dann wirds auch Grün passen.

michaelposch
Mitglied

Beiträge:22
Registriert:5. May 2016

Kurzes Leuchten der LEDs, danach nichts mehr

7. Mai 2016, 12:49

jetzt würd alles funktionieren danke!

ein problem gibts noch.. die farben sind immer gegengleich, d.h. wenn ich rechts oben ein rotes kästchen habe,
leuchten die LEDs links oben in der Ecke rot
weiß leider nicht wo ich die einstellung ändern kann

cenyal
Mitglied

Beiträge:156
Registriert:25. Jan 2016

Kurzes Leuchten der LEDs, danach nichts mehr

7. Mai 2016, 16:25

Uhrzeigersinn oder gegen Uhrzeigersinn einstellen.

michaelposch
Mitglied

Beiträge:22
Registriert:5. May 2016

Kurzes Leuchten der LEDs, danach nichts mehr

9. Mai 2016, 12:58

hilft leider nicht :'(

b2un0
Moderator

Beiträge:1819
Registriert:16. Nov 2015
Wohnort:Hamburg
Beruf:Softwareentwickler

Kurzes Leuchten der LEDs, danach nichts mehr

9. Mai 2016, 13:12

Muss aber, ansonsten kann nur noch die Startposition deiner ersten LED falsch sein.
Kein Support per PM!

michaelposch
Mitglied

Beiträge:22
Registriert:5. May 2016

Kurzes Leuchten der LEDs, danach nichts mehr

9. Mai 2016, 17:15

so jetzt funktionierts!

jetzt möcht ich noch, dass das externe ambilight automatisch startet.

in der anleitung steht, dass ich einfach die hyperion.config.grabber in das andere file hyperion.config hineinkopieren soll.
ich machs genau so - starte den raspi neu - alles dunkel; keine LED leuchtet :(

meine hyperion.config.grabber datei:

Code: Alles auswählen

// Automatically generated configuration file for 'Hyperion daemon'
// Generated by: HyperCon (The Hyperion deamon configuration file builder)
// Created with HyperCon V1.01.2 (31.03.2016)

{
   /// Device configuration contains the following fields:
   /// * 'name'       : The user friendly name of the device (only used for display purposes)
   /// * 'type'       : The type of the device or leds (known types for now are
   /// ---------SPI---------, APA102, WS2801, P9813, LPD6803, LPD8806, ---------PWM---------, WS2812b (just RPi1), WS281X (RPi1, RPi2, RPi3), --------OTHER--------, PhilipsHUE, AtmoOrb, PiBlaster, Tinkerforge, UDP, FadeCandy, SEDU, TPM2, USBASP-WS2801, USBASP-WS2812, ------3rd PARTY------, Adalight, AdalightAPA102, AmbiLed, Atmo, Lightpack, Multi-Lightpack, Paintpack, Test (file), None)
   /// * [device type specific configuration]
   /// * 'colorOrder' : The order of the color bytes ('rgb', 'rbg', 'bgr', etc.).
   "device" :
   {
      "name"       : "MyHyperionConfig",
      "type"       : "ws2801",
      "output"     : "/dev/spidev0.0",
      "rate"     : 250000,
      "colorOrder" : "rbg"
   },

   /// Color manipulation configuration used to tune the output colors to specific surroundings.
   /// The configuration contains a list of color-transforms. Each transform contains the
   /// following fields:
   ///  * 'id'   : The unique identifier of the color transformation (eg 'device_1')   ///  * 'leds' : The indices (or index ranges) of the leds to which this color transform applies
   ///             (eg '0-5, 9, 11, 12-17'). The indices are zero based.   ///  * 'hsv' : The manipulation in the Hue-Saturation-Value color domain with the following
   ///            tuning parameters:
   ///            - 'saturationGain'  The gain adjustement of the saturation
   ///            - 'valueGain'       The gain adjustement of the value
   ///  * 'red'/'green'/'blue' : The manipulation in the Red-Green-Blue color domain with the
   ///                           following tuning parameters for each channel:
   ///            - 'threshold'       The minimum required input value for the channel to be on
   ///                                (else zero)
   ///            - 'gamma'           The gamma-curve correction factor
   ///            - 'blacklevel'      The lowest possible value (when the channel is black)
   ///            - 'whitelevel'      The highest possible value (when the channel is white)
   ///
   /// Next to the list with color transforms there is also a smoothing option.
   ///  * 'smoothing' : Smoothing of the colors in the time-domain with the following tuning
   ///                  parameters:
   ///            - 'type'            The type of smoothing algorithm ('linear' or 'none')
   ///            - 'time_ms'         The time constant for smoothing algorithm in milliseconds
   ///            - 'updateFrequency' The update frequency of the leds in Hz
   ///            - 'updateDelay'     The delay of the output to leds (in periods of smoothing)
   "color" :
   {
      "correction" :
      [
         {
            "id"   : "default",
            "leds" : "*",
            "correctionValues" :
            {
               "red"    : 255,
               "green"   : 255,
               "blue"    : 255
            }
         }
      ],
      "temperature" :
      [
         {
            "id"   : "default",
            "leds" : "*",
            "temperatureValues" :
            {
               "red"    : 255,
               "green"   : 255,
               "blue"    : 255
            }
         }
      ],
      "transform" :
      [
         {
            "id"   : "default",
            "leds" : "*",
            "hsv" :
            {
               "saturationGain"   : 1.0000,
               "valueGain"      : 1.0000
            },
            "hsl" :
            {
               "saturationGain"   : 1.0000,
               "luminanceGain"   : 1.0000
            },
            "red" :
            {
               "threshold"    : 0.0000,
               "gamma"        : 1.0000,
               "blacklevel"   : 0.0000,
               "whitelevel"   : 1.0000
            },
            "green" :
            {
               "threshold"    : 0.0000,
               "gamma"        : 1.0000,
               "blacklevel"   : 0.0000,
               "whitelevel"   : 1.0000
            },
            "blue" :
            {
               "threshold"    : 0.0000,
               "gamma"        : 1.0000,
               "blacklevel"   : 0.0000,
               "whitelevel"   : 1.0000
            }
         }
      ],

      "smoothing" :
      {
         "type"            : "linear",
         "time_ms"         : 200,
         "updateFrequency" : 25.0000,
         "updateDelay"     : 0
      }
   },

   /// The black border configuration, contains the following items:
   ///  * enable             : true if the detector should be activated
   ///  * threshold          : Value below which a pixel is regarded as black (value between 0.0 and 1.0)
   ///  * unknownFrameCnt      : Number of frames without any detection before the border is set to 0 (default 600)
   ///  * borderFrameCnt      : Number of frames before a consistent detected border gets set (default 50)
   ///  * maxInconsistentCnt    : Number of inconsistent frames that are ignored before a new border gets a chance to proof consistency
   ///  * blurRemoveCnt      : Number of pixels that get removed from the detected border to cut away blur (default 1)
   ///  * mode             : Border detection mode (values=default,classic,osd)
   "blackborderdetector" :
   {
      "enable" : true,
      "threshold" : 0.0,
      "unknownFrameCnt" : 600,
      "borderFrameCnt" : 50,
      "maxInconsistentCnt" : 10,
      "blurRemoveCnt" : 1,
      "mode" : "default"
   },

   /// The configuration of the effect engine, contains the following items:
   ///  * paths      : An array with absolute location(s) of directories with effects
   ///  * color       : Set static color after boot -> set effect to "" (empty) and input the values [R,G,B] and set duration_ms NOT to 0 (use 1) instead
   ///  * effect       : The effect selected as 'boot sequence'
   ///  * duration_ms   : The duration of the selected effect (0=endless)
   ///  * priority    : The priority of the selected effect/static color (default=990) HINT: lower value result in HIGHER priority!
   "effects" :
   {
      "paths" :
      [
         "/storage/hyperion/effects"
      ]
   },

   "bootsequence" :
   {
      "color" : [0,0,0],
      "effect" : "Rainbow swirl fast",
      "duration_ms" : 3000,
      "priority" : 990
   },

   /// The configuration of the Json/Proto forwarder. Forward messages to multiple instances of Hyperion on same and/or other hosts
   /// 'proto' is mostly used for video streams and 'json' for effects
   ///  * proto   : Proto server adress and port of your target. Syntax:[IP:PORT] -> ["127.0.0.1:19447"] or more instances to forward ["127.0.0.1:19447","192.168.0.24:19449"]
   ///  * json   : Json server adress and port of your target. Syntax:[IP:PORT] -> ["127.0.0.1:19446"] or more instances to forward ["127.0.0.1:19446","192.168.0.24:19448"]
   ///  HINT:   If you redirect to "127.0.0.1" (localhost) you could start a second hyperion with another device/led config!
   ///       Be sure your client(s) is/are listening on the configured ports. The second Hyperion (if used) also needs to be configured! (HyperCon -> External -> Json Server/Proto Server)
   //"forwarder" :
   //{
   //   "proto" : ["127.0.0.1:19447"],
      //"json" : ["127.0.0.1:19446"]
   //},

   ///  The configuration for the frame-grabber, contains the following items:
   ///   * width        : The width of the grabbed frames [pixels]
   ///   * height       : The height of the grabbed frames [pixels]
   ///   * frequency_Hz : The frequency of the frame grab [Hz]
   ///   * priority     : The priority of the frame-gabber (Default=890) HINT: lower value result in HIGHER priority!
   ///   * ATTENTION    : Power-of-Two resolution is not supported and leads to unexpected behaviour!
//    "framegrabber" :
//    {
//       "width" : 80,
//       "height" : 45,
//       "frequency_Hz" : 10.0,
//       "priority" : 890
//    },

   /// The configuration of the Kodi connection used to enable and disable the frame-grabber. Contains the following fields:
   ///  * xbmcAddress       : The IP address of the Kodi-host
   ///  * xbmcTcpPort       : The TCP-port of the Kodi-server
   ///  * grabVideo         : Flag indicating that the frame-grabber is on(true) during video playback
   ///  * grabPictures      : Flag indicating that the frame-grabber is on(true) during picture show
   ///  * grabAudio         : Flag indicating that the frame-grabber is on(true) during audio playback
   ///  * grabMenu          : Flag indicating that the frame-grabber is on(true) at the Kodi menu
   ///  * grabScreensaver   : Flag indicating that the frame-grabber is on(true) when Kodi is on screensaver
   ///  * enable3DDetection : Flag indicating that the frame-grabber should switch to a 3D compatible modus if a 3D video is playing
//    "xbmcVideoChecker" :
//    {
//       "xbmcAddress" : "10.0.0.15",
//       "xbmcTcpPort" : 9090,
//       "grabVideo" : true,
//       "grabPictures" : true,
//       "grabAudio" : true,
//       "grabMenu" : false,
//       "grabScreensaver" : true,
//       "enable3DDetection" : true
//    },

   /// The configuration of the Json server which enables the json remote interface
   ///  * port : Port at which the json server is started
   "jsonServer" :
   {
      "port" : 19444
   },

   /// The configuration of the Proto server which enables the protobuffer remote interface
   ///  * port : Port at which the protobuffer server is started
   "protoServer" :
   {
      "port" : 19445
   },

   /// The configuration of the boblight server which enables the boblight remote interface
   ///  * port    : Port at which the boblight server is started
   ///  * priority: Priority of the boblight server (Default=900) HINT: lower value result in HIGHER priority!
//    "boblightServer" :
//    {
//       "port" : 19333,
//       "priority" : 900
//    },

   /// Configuration for the embedded V4L2 grabber
   ///  * device          : V4L2 Device to use [default="/dev/video0"]
   ///  * input           : V4L2 input to use [default=0]
   ///  * standard        : Video standard (no-change/PAL/NTSC) [default="no-change"]
   ///  * width                : V4L2 width to set [default=-1]
   ///  * height               : V4L2 height to set [default=-1]
   ///  * frameDecimation      : Frame decimation factor [default=2]
   ///  * sizeDecimation       : Size decimation factor [default=8]
   ///  * priority             : Hyperion priority channel [default=900]
   ///  * mode                 : 3D mode to use 2D/3DSBS/3DTAB (note: no autodetection) [default="2D"]
   ///  * cropLeft             : Cropping from the left [default=0]
   ///  * cropRight            : Cropping from the right [default=0]
   ///  * cropTop              : Cropping from the top [default=0]
   ///  * cropBottom           : Cropping from the bottom [default=0]
   ///  * redSignalThreshold   : Signal threshold for the red channel between 0.0 and 1.0 [default=0.0]
   ///  * greenSignalThreshold : Signal threshold for the green channel between 0.0 and 1.0 [default=0.0]
   ///  * blueSignalThreshold  : Signal threshold for the blue channel between 0.0 and 1.0 [default=0.0]
   "grabber-v4l2" :
   {
      "device" : "/dev/video0",
      "input" : 0,
      "standard" : "NTSC",
      "width" : -1,
      "height" : -1,
      "frameDecimation" : 2,
      "sizeDecimation" : 8,
      "priority" : 900,
      "mode" : "2D",
      "cropLeft" : 0,
      "cropRight" : 0,
      "cropTop" : 0,
      "cropBottom" : 0,
      "redSignalThreshold" : 0.0,
      "greenSignalThreshold" : 0.0,
      "blueSignalThreshold" : 0.0
   },

   ///  The configuration for each individual led. This contains the specification of the area
   ///  averaged of an input image for each led to determine its color. Each item in the list
   ///  contains the following fields:
   ///  * index: The index of the led. This determines its location in the string of leds; zero
   ///           being the first led.
   ///  * hscan: The fractional part of the image along the horizontal used for the averaging
   ///           (minimum and maximum inclusive)
   ///  * vscan: The fractional part of the image along the vertical used for the averaging
   ///           (minimum and maximum inclusive)
   "leds" :
   [
      {
         "index" : 0,
         "hscan" : { "minimum" : 0.6563, "maximum" : 0.6875 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 1,
         "hscan" : { "minimum" : 0.6875, "maximum" : 0.7188 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 2,
         "hscan" : { "minimum" : 0.7188, "maximum" : 0.7500 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 3,
         "hscan" : { "minimum" : 0.7500, "maximum" : 0.7813 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 4,
         "hscan" : { "minimum" : 0.7813, "maximum" : 0.8125 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 5,
         "hscan" : { "minimum" : 0.8125, "maximum" : 0.8438 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 6,
         "hscan" : { "minimum" : 0.8438, "maximum" : 0.8750 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 7,
         "hscan" : { "minimum" : 0.8750, "maximum" : 0.9063 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 8,
         "hscan" : { "minimum" : 0.9063, "maximum" : 0.9375 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 9,
         "hscan" : { "minimum" : 0.9375, "maximum" : 0.9688 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 10,
         "hscan" : { "minimum" : 0.9688, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 11,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.9474, "maximum" : 1.0000 }
      },
      {
         "index" : 12,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.8947, "maximum" : 0.9474 }
      },
      {
         "index" : 13,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.8421, "maximum" : 0.8947 }
      },
      {
         "index" : 14,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.7895, "maximum" : 0.8421 }
      },
      {
         "index" : 15,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.7368, "maximum" : 0.7895 }
      },
      {
         "index" : 16,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.6842, "maximum" : 0.7368 }
      },
      {
         "index" : 17,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.6316, "maximum" : 0.6842 }
      },
      {
         "index" : 18,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.5789, "maximum" : 0.6316 }
      },
      {
         "index" : 19,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.5263, "maximum" : 0.5789 }
      },
      {
         "index" : 20,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.4737, "maximum" : 0.5263 }
      },
      {
         "index" : 21,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.4211, "maximum" : 0.4737 }
      },
      {
         "index" : 22,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.3684, "maximum" : 0.4211 }
      },
      {
         "index" : 23,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.3158, "maximum" : 0.3684 }
      },
      {
         "index" : 24,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.2632, "maximum" : 0.3158 }
      },
      {
         "index" : 25,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.2105, "maximum" : 0.2632 }
      },
      {
         "index" : 26,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.1579, "maximum" : 0.2105 }
      },
      {
         "index" : 27,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.1053, "maximum" : 0.1579 }
      },
      {
         "index" : 28,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.0526, "maximum" : 0.1053 }
      },
      {
         "index" : 29,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0526 }
      },
      {
         "index" : 30,
         "hscan" : { "minimum" : 0.9688, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 31,
         "hscan" : { "minimum" : 0.9375, "maximum" : 0.9688 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 32,
         "hscan" : { "minimum" : 0.9063, "maximum" : 0.9375 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 33,
         "hscan" : { "minimum" : 0.8750, "maximum" : 0.9063 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 34,
         "hscan" : { "minimum" : 0.8438, "maximum" : 0.8750 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 35,
         "hscan" : { "minimum" : 0.8125, "maximum" : 0.8438 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 36,
         "hscan" : { "minimum" : 0.7813, "maximum" : 0.8125 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 37,
         "hscan" : { "minimum" : 0.7500, "maximum" : 0.7813 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 38,
         "hscan" : { "minimum" : 0.7188, "maximum" : 0.7500 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 39,
         "hscan" : { "minimum" : 0.6875, "maximum" : 0.7188 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 40,
         "hscan" : { "minimum" : 0.6563, "maximum" : 0.6875 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 41,
         "hscan" : { "minimum" : 0.6250, "maximum" : 0.6563 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 42,
         "hscan" : { "minimum" : 0.5938, "maximum" : 0.6250 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 43,
         "hscan" : { "minimum" : 0.5625, "maximum" : 0.5938 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 44,
         "hscan" : { "minimum" : 0.5313, "maximum" : 0.5625 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 45,
         "hscan" : { "minimum" : 0.5000, "maximum" : 0.5313 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 46,
         "hscan" : { "minimum" : 0.4688, "maximum" : 0.5000 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 47,
         "hscan" : { "minimum" : 0.4375, "maximum" : 0.4688 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 48,
         "hscan" : { "minimum" : 0.4063, "maximum" : 0.4375 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 49,
         "hscan" : { "minimum" : 0.3750, "maximum" : 0.4063 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 50,
         "hscan" : { "minimum" : 0.3438, "maximum" : 0.3750 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 51,
         "hscan" : { "minimum" : 0.3125, "maximum" : 0.3438 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 52,
         "hscan" : { "minimum" : 0.2813, "maximum" : 0.3125 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 53,
         "hscan" : { "minimum" : 0.2500, "maximum" : 0.2813 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 54,
         "hscan" : { "minimum" : 0.2188, "maximum" : 0.2500 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 55,
         "hscan" : { "minimum" : 0.1875, "maximum" : 0.2188 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 56,
         "hscan" : { "minimum" : 0.1563, "maximum" : 0.1875 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 57,
         "hscan" : { "minimum" : 0.1250, "maximum" : 0.1563 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 58,
         "hscan" : { "minimum" : 0.0938, "maximum" : 0.1250 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 59,
         "hscan" : { "minimum" : 0.0625, "maximum" : 0.0938 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 60,
         "hscan" : { "minimum" : 0.0313, "maximum" : 0.0625 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 61,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0313 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 62,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0526 }
      },
      {
         "index" : 63,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.0526, "maximum" : 0.1053 }
      },
      {
         "index" : 64,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.1053, "maximum" : 0.1579 }
      },
      {
         "index" : 65,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.1579, "maximum" : 0.2105 }
      },
      {
         "index" : 66,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.2105, "maximum" : 0.2632 }
      },
      {
         "index" : 67,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.2632, "maximum" : 0.3158 }
      },
      {
         "index" : 68,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.3158, "maximum" : 0.3684 }
      },
      {
         "index" : 69,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.3684, "maximum" : 0.4211 }
      },
      {
         "index" : 70,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.4211, "maximum" : 0.4737 }
      },
      {
         "index" : 71,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.4737, "maximum" : 0.5263 }
      },
      {
         "index" : 72,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.5263, "maximum" : 0.5789 }
      },
      {
         "index" : 73,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.5789, "maximum" : 0.6316 }
      },
      {
         "index" : 74,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.6316, "maximum" : 0.6842 }
      },
      {
         "index" : 75,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.6842, "maximum" : 0.7368 }
      },
      {
         "index" : 76,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.7368, "maximum" : 0.7895 }
      },
      {
         "index" : 77,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.7895, "maximum" : 0.8421 }
      },
      {
         "index" : 78,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.8421, "maximum" : 0.8947 }
      },
      {
         "index" : 79,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.8947, "maximum" : 0.9474 }
      },
      {
         "index" : 80,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.9474, "maximum" : 1.0000 }
      },
      {
         "index" : 81,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0313 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 82,
         "hscan" : { "minimum" : 0.0313, "maximum" : 0.0625 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 83,
         "hscan" : { "minimum" : 0.0625, "maximum" : 0.0938 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 84,
         "hscan" : { "minimum" : 0.0938, "maximum" : 0.1250 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 85,
         "hscan" : { "minimum" : 0.1250, "maximum" : 0.1563 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 86,
         "hscan" : { "minimum" : 0.1563, "maximum" : 0.1875 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 87,
         "hscan" : { "minimum" : 0.1875, "maximum" : 0.2188 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 88,
         "hscan" : { "minimum" : 0.2188, "maximum" : 0.2500 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 89,
         "hscan" : { "minimum" : 0.2500, "maximum" : 0.2813 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 90,
         "hscan" : { "minimum" : 0.2813, "maximum" : 0.3125 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 91,
         "hscan" : { "minimum" : 0.3125, "maximum" : 0.3438 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      }
   ],

   "endOfJson" : "endOfJson"
}

b2un0
Moderator

Beiträge:1819
Registriert:16. Nov 2015
Wohnort:Hamburg
Beruf:Softwareentwickler

Kurzes Leuchten der LEDs, danach nichts mehr

9. Mai 2016, 17:30

viewtopic.php?f=8&t=836

Beitrag #2 abarbeiten..
Kein Support per PM!

Zurück zu „Ambilight - Support“