Benutzeravatar
pommes
Neuling

Beiträge:12
Registriert:9. Apr 2016

LED flackern/leuchten/blinken

14. Mai 2016, 11:28

Hallo zusammen,

nochmal ein Beitrag von mir, in der Hoffnung, dass vllt jemand eine Idee hat oder einen Fehler findet.

Kurz zur Problemstellung:
Pi3 mit OPENELEC
Bei den Testbildern (rot,grün, blau und rotgrünblau in einem Bild) sowie bei der Ansteuerung per App stimmen die Farben und es gibt kein flackern! Bei Bildern mit mehreren Farben und Filmen kommt es zum Flackern der LEDs.

Punkte von b2un0:

1. Verwendet werden knappe 3m WS2801 LED's.
http://www.ebay.de/itm/1-5M-WS2801-RGB- ... hMLuAE_wLQ

2. Fotos von der Verkabelung:
Verbindung_Netzteil_Stripe.jpg

Verbindung_Pi3_Stripe.jpg

Ecke_1.jpg

Ecke_2.jpg

Ecke_3.jpg

Ecke_4.jpg




3. Boot Config:

Code: Alles auswählen

################################################################################
#      This file is part of OpenELEC - http://www.openelec.tv
#      Copyright (C) 2009-2014 Stephan Raue (stephan@openelec.tv)
#      Inspired and partly copied from:
#  http://youresuchageek.blogspot.fr/2012/09/howto-raspberry-pi-openelec-on.html
#
#  OpenELEC is free software: you can redistribute it and/or modify
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation, either version 2 of the License, or
#  (at your option) any later version.
#
#  OpenELEC is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
################################################################################
# Bootloader configuration - config.txt
################################################################################

################################################################################
# Memory (System/GPU configuration )
################################################################################

# default GPU memory split (do not change if you do not know what you are doing)
  gpu_mem=128

# SDRAM size based GPU memory split, uncomment and setup to override 'gpu_mem'
  gpu_mem_256=112
  gpu_mem_512=160
  gpu_mem_1024=256

################################################################################
# Overclocking settings
# WARNING: Do not change/enable if you do not know what you are doing!
#          The System may become unstable or you can have data corruption or
#          you can loose your warranty if you set wrong settings
#
# please read: http://elinux.org/RPi_config.txt#Overclocking_configuration
################################################################################

# Overclock mode settings.
#
# default recommended values are: arm_freq | core_freq | sdram_freq | over_voltage
# no overclocking               :    700   |    250    |    400     |      0
# mode 'Modest'                 :    800   |    300    |    400     |      0
# mode 'Medium'                 :    900   |    333    |    450     |      2
# mode 'High'                   :    950   |    450    |    450     |      6
# mode 'Turbo'                  :   1000   |    500    |    600     |      6
# mode 'Pi2'                    :   1000   |    500    |    500     |      2

# arm_freq=700
# core_freq=250
# sdram_freq=400
# over_voltage=0

# set to 'force_turbo=1' to disable dynamic overclocking (you can lose your warranty!)
  force_turbo=0

# If you have any data corruption using Turbo Mode and overclocking
# try with this setting uncommented
# If this still fails, try to use Medium mode without "over_voltage=2"
# If it ultimately keeps failing, forget about this until it gets fixed
# Use a more conservative mode that will works fine in any cases:
# initial_turbo=30

################################################################################
# Overscan settings
################################################################################

# Make display smaller to stop text spilling off the screen
# see also http://www.raspberrypi.org/phpBB3/viewtopic.php?f=67&t=15700
# overscan_scale=1
# disable_overscan=1

# Adapt overscan values to your needs
# overscan_left=57
# overscan_right=59
# overscan_top=20
# overscan_bottom=20

################################################################################
# various settings see also: http://elinux.org/RPi_config.txt
################################################################################

# Force HDMI even if unplugged or powered off
  hdmi_force_hotplug=1

# Doesn't sent initial active source message.
# Avoids bringing CEC (enabled TV) out of standby and channel switch when
# rebooting.
  hdmi_ignore_cec_init=1

################################################################################
# License keys to enable GPU hardware decoding for various codecs
# to obtain keys visit the shop at http://www.raspberrypi.com
################################################################################

# decode_MPG2=0x00000000
# decode_WVC1=0x00000000
# decode_DTS=0x00000000
# decode_DDP=0x00000000

################################################################################
# End of default configuration
# all values below this line were inserted from config.txt.bk (your old config)
# and can be merged with the above values
################################################################################

# Ambilight aktivieren
  dtparam=spi=on

# mehr USB-Power
  max_usb_current=1


4. Hyperion.Config.json:

Code: Alles auswählen

// Automatically generated configuration file for 'Hyperion daemon'
// Generated by: HyperCon (The Hyperion deamon configuration file builder)
// Created with HyperCon V1.00.1 (15.03.2016)

{
   /// Device configuration contains the following fields:
   /// * 'name'       : The user friendly name of the device (only used for display purposes)
   /// * 'type'       : The type of the device or leds (known types for now are
   /// -------------SPI---------------, APA102, WS2801, P9813, LPD6803, LPD8806, -------------PWM---------------, WS2812b, WS281x (no 12b), ------------OTHER-------------, PhilipsHUE, AtmoOrb, PiBlaster, ThinkerForge, UDP, SEDU, TPM2, USBASP-WS2801, USBASP-WS2812, ----------3rd PARTY------------, Adalight, AdalightAPA102, AmbiLed, Atmo, Lightberry, Lightpack, Multi-Lightpack, Paintpack, Test, None)
   /// * [device type specific configuration]
   /// * 'colorOrder' : The order of the color bytes ('rgb', 'rbg', 'bgr', etc.).
   ///
   /// * 'Specific of Philips Hue:
   /// * 'username'         : The name of user registred on the Philips Hue Bridge
   /// * 'switchOffOnBlack': Define if Hue light switch off when black is detected
   /// * 'transitiontime'    : Set the time of transition between color of Hue light
   "device" :
   {
      "name"       : "MyPi",
      "type"       : "ws2801",
      "output"     : "/dev/spidev0.0",
      "rate"     : 1000000,
      "colorOrder" : "rgb"
   },

   /// Color manipulation configuration used to tune the output colors to specific surroundings.
   /// The configuration contains a list of color-transforms. Each transform contains the
   /// following fields:
   ///  * 'id'   : The unique identifier of the color transformation (eg 'device_1')   ///  * 'leds' : The indices (or index ranges) of the leds to which this color transform applies
   ///             (eg '0-5, 9, 11, 12-17'). The indices are zero based.   ///  * 'hsv' : The manipulation in the Hue-Saturation-Value color domain with the following
   ///            tuning parameters:
   ///            - 'saturationGain'  The gain adjustement of the saturation
   ///            - 'valueGain'       The gain adjustement of the value
   ///  * 'red'/'green'/'blue' : The manipulation in the Red-Green-Blue color domain with the
   ///                           following tuning parameters for each channel:
   ///            - 'threshold'       The minimum required input value for the channel to be on
   ///                                (else zero)
   ///            - 'gamma'           The gamma-curve correction factor
   ///            - 'blacklevel'      The lowest possible value (when the channel is black)
   ///            - 'whitelevel'      The highest possible value (when the channel is white)
   ///
   /// Next to the list with color transforms there is also a smoothing option.
   ///  * 'smoothing' : Smoothing of the colors in the time-domain with the following tuning
   ///                  parameters:
   ///            - 'type'            The type of smoothing algorithm ('linear' or 'none')
   ///            - 'time_ms'         The time constant for smoothing algorithm in milliseconds
   ///            - 'updateFrequency' The update frequency of the leds in Hz
   ///            - 'updateDelay'     The delay of the output to leds (in periods of smoothing)
   "color" :
   {
      "transform" :
      [
         {
            "id"   : "default",
            "leds" : "*",
            "hsv" :
            {
               "saturationGain" : 1.2000,
               "valueGain"      : 1.2000
            },
            "red" :
            {
               "threshold"  : 0.1000,
               "gamma"      : 2.0000,
               "blacklevel" : 0.0000,
               "whitelevel" : 1.0000
            },
            "green" :
            {
               "threshold"  : 0.1000,
               "gamma"      : 2.0000,
               "blacklevel" : 0.0000,
               "whitelevel" : 0.8000
            },
            "blue" :
            {
               "threshold"  : 0.1000,
               "gamma"      : 2.0000,
               "blacklevel" : 0.0000,
               "whitelevel" : 0.7000
            }
         }
      ],
      "smoothing" :
      {
         "type"            : "linear",
         "time_ms"         : 100,
         "updateFrequency" : 25.0000,
         "updateDelay"     : 0
      }
   },

   /// The black border configuration, contains the following items:
   ///  * enable             : true if the detector should be activated
   ///  * threshold          : Value below which a pixel is regarded as black (value between 0.0 and 1.0)
   ///  * unknownFrameCnt      : Number of frames without any detection before the border is set to 0 (default 600)
   ///  * borderFrameCnt      : Number of frames before a consistent detected border gets set (default 50)
   ///  * maxInconsistentCnt    : Number of inconsistent frames that are ignored before a new border gets a chance to proof consistency
   ///  * blurRemoveCnt      : Number of pixels that get removed from the detected border to cut away blur (default 1)
   ///  * mode             : Border detection mode (values=default,classic,osd)
   "blackborderdetector" :
   {
      "enable" : true,
      "threshold" : 0.01,
      "unknownFrameCnt" : 600,
      "borderFrameCnt" : 50,
      "maxInconsistentCnt" : 10,
      "blurRemoveCnt" : 1,
      "mode" : "default"
   },

   /// The configuration of the effect engine, contains the following items:
   ///  * paths      : An array with absolute location(s) of directories with effects
   ///  * color       : Set static color after boot -> set effect to "" (empty) and input the values [R,G,B] and set duration_ms NOT to 0 (use 1) instead
   ///  * effect       : The effect selected as 'boot sequence'
   ///  * duration_ms   : The duration of the selected effect (0=endless)
   ///  * priority    : The priority of the selected effect/static color (default=990) HINT: lower value result in HIGHER priority!
   "effects" :
   {
      "paths" :
      [
         "/storage/hyperion/effects"
      ]
   },

   "bootsequence" :
   {
      "color" : [0,0,0],
      "effect" : "Rainbow swirl fast",
      "duration_ms" : 3000,
      "priority" : 990
   },

   /// The configuration of the Json/Proto forwarder. Forward messages to multiple instances of Hyperion on same and/or other hosts
   /// 'proto' is mostly used for video streams and 'json' for effects
   ///  * proto   : Proto server adress and port of your target. Syntax:[IP:PORT] -> ["127.0.0.1:19447"] or more instances to forward ["127.0.0.1:19447","192.168.0.24:19449"]
   ///  * json   : Json server adress and port of your target. Syntax:[IP:PORT] -> ["127.0.0.1:19446"] or more instances to forward ["127.0.0.1:19446","192.168.0.24:19448"]
   ///  HINT:   If you redirect to "127.0.0.1" (localhost) you could start a second hyperion with another device/led config!
   ///       Be sure your client(s) is/are listening on the configured ports. The second Hyperion (if used) also needs to be configured! (HyperCon -> External -> Json Server/Proto Server)
//    "forwarder" :
//    {
//       "proto" : ["127.0.0.1:19447"],
//       "json" : ["127.0.0.1:19446"]
//    },

   ///  The configuration for the frame-grabber, contains the following items:
   ///   * width        : The width of the grabbed frames [pixels]
   ///   * height       : The height of the grabbed frames [pixels]
   ///   * frequency_Hz : The frequency of the frame grab [Hz]
   ///   * priority     : The priority of the frame-gabber (Default=900) HINT: lower value result in HIGHER priority!
   ///   * ATTENTION    : Power-of-Two resolution is not supported and leads to unexpected behaviour!
   "framegrabber" :
   {
      "width" : 64,
      "height" : 64,
      "frequency_Hz" : 10.0,
      "priority" : 900
   },

   /// The configuration of the Kodi connection used to enable and disable the frame-grabber. Contains the following fields:
   ///  * xbmcAddress       : The IP address of the Kodi-host
   ///  * xbmcTcpPort       : The TCP-port of the Kodi-server
   ///  * grabVideo         : Flag indicating that the frame-grabber is on(true) during video playback
   ///  * grabPictures      : Flag indicating that the frame-grabber is on(true) during picture show
   ///  * grabAudio         : Flag indicating that the frame-grabber is on(true) during audio playback
   ///  * grabMenu          : Flag indicating that the frame-grabber is on(true) at the Kodi menu
   ///  * grabScreensaver   : Flag indicating that the frame-grabber is on(true) when Kodi is on screensaver
   ///  * enable3DDetection : Flag indicating that the frame-grabber should switch to a 3D compatible modus if a 3D video is playing
   "xbmcVideoChecker" :
   {
      "xbmcAddress" : "127.0.0.1",
      "xbmcTcpPort" : 9090,
      "grabVideo" : true,
      "grabPictures" : true,
      "grabAudio" : true,
      "grabMenu" : false,
      "grabScreensaver" : true,
      "enable3DDetection" : true
   },

   /// The configuration of the Json server which enables the json remote interface
   ///  * port : Port at which the json server is started
   "jsonServer" :
   {
      "port" : 19444
   },

   /// The configuration of the Proto server which enables the protobuffer remote interface
   ///  * port : Port at which the protobuffer server is started
   "protoServer" :
   {
      "port" : 19445
   },

   /// The configuration of the boblight server which enables the boblight remote interface
   ///  * port    : Port at which the boblight server is started
   ///  * priority: Priority of the boblight server (Default=900) HINT: lower value result in HIGHER priority!
//    "boblightServer" :
//    {
//       "port" : 19333,
//       "priority" : 900
//    },

   /// Configuration for the embedded V4L2 grabber
   ///  * device          : V4L2 Device to use [default="/dev/video0"]
   ///  * input           : V4L2 input to use [default=0]
   ///  * standard        : Video standard (no-change/PAL/NTSC) [default="no-change"]
   ///  * width                : V4L2 width to set [default=-1]
   ///  * height               : V4L2 height to set [default=-1]
   ///  * frameDecimation      : Frame decimation factor [default=2]
   ///  * sizeDecimation       : Size decimation factor [default=8]
   ///  * priority             : Hyperion priority channel [default=800]
   ///  * mode                 : 3D mode to use 2D/3DSBS/3DTAB (note: no autodetection) [default="2D"]
   ///  * cropLeft             : Cropping from the left [default=0]
   ///  * cropRight            : Cropping from the right [default=0]
   ///  * cropTop              : Cropping from the top [default=0]
   ///  * cropBottom           : Cropping from the bottom [default=0]
   ///  * redSignalThreshold   : Signal threshold for the red channel between 0.0 and 1.0 [default=0.0]
   ///  * greenSignalThreshold : Signal threshold for the green channel between 0.0 and 1.0 [default=0.0]
   ///  * blueSignalThreshold  : Signal threshold for the blue channel between 0.0 and 1.0 [default=0.0]
//    "grabber-v4l2" :
//    {
//       "device" : "/dev/video0",
//       "input" : 0,
//       "standard" : "no-change",
//       "width" : -1,
//       "height" : -1,
//       "frameDecimation" : 2,
//       "sizeDecimation" : 8,
//       "priority" : 800,
//       "mode" : "2D",
//       "cropLeft" : 0,
//       "cropRight" : 0,
//       "cropTop" : 0,
//       "cropBottom" : 0,
//       "redSignalThreshold" : 0.0,
//       "greenSignalThreshold" : 0.0,
//       "blueSignalThreshold" : 0.0
//    },

   ///  The configuration for each individual led. This contains the specification of the area
   ///  averaged of an input image for each led to determine its color. Each item in the list
   ///  contains the following fields:
   ///  * index: The index of the led. This determines its location in the string of leds; zero
   ///           being the first led.
   ///  * hscan: The fractional part of the image along the horizontal used for the averaging
   ///           (minimum and maximum inclusive)
   ///  * vscan: The fractional part of the image along the vertical used for the averaging
   ///           (minimum and maximum inclusive)
   "leds" :
   [
      {
         "index" : 0,
         "hscan" : { "minimum" : 0.5862, "maximum" : 0.6207 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 1,
         "hscan" : { "minimum" : 0.6207, "maximum" : 0.6552 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 2,
         "hscan" : { "minimum" : 0.6552, "maximum" : 0.6897 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 3,
         "hscan" : { "minimum" : 0.6897, "maximum" : 0.7241 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 4,
         "hscan" : { "minimum" : 0.7241, "maximum" : 0.7586 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 5,
         "hscan" : { "minimum" : 0.7586, "maximum" : 0.7931 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 6,
         "hscan" : { "minimum" : 0.7931, "maximum" : 0.8276 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 7,
         "hscan" : { "minimum" : 0.8276, "maximum" : 0.8621 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 8,
         "hscan" : { "minimum" : 0.8621, "maximum" : 0.8966 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 9,
         "hscan" : { "minimum" : 0.8966, "maximum" : 0.9310 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 10,
         "hscan" : { "minimum" : 0.9310, "maximum" : 0.9655 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 11,
         "hscan" : { "minimum" : 0.9655, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 12,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 13,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.9412, "maximum" : 1.0000 }
      },
      {
         "index" : 14,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.8824, "maximum" : 0.9412 }
      },
      {
         "index" : 15,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.8235, "maximum" : 0.8824 }
      },
      {
         "index" : 16,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.7647, "maximum" : 0.8235 }
      },
      {
         "index" : 17,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.7059, "maximum" : 0.7647 }
      },
      {
         "index" : 18,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.6471, "maximum" : 0.7059 }
      },
      {
         "index" : 19,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.5882, "maximum" : 0.6471 }
      },
      {
         "index" : 20,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.5294, "maximum" : 0.5882 }
      },
      {
         "index" : 21,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.4706, "maximum" : 0.5294 }
      },
      {
         "index" : 22,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.4118, "maximum" : 0.4706 }
      },
      {
         "index" : 23,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.3529, "maximum" : 0.4118 }
      },
      {
         "index" : 24,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.2941, "maximum" : 0.3529 }
      },
      {
         "index" : 25,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.2353, "maximum" : 0.2941 }
      },
      {
         "index" : 26,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.1765, "maximum" : 0.2353 }
      },
      {
         "index" : 27,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.1176, "maximum" : 0.1765 }
      },
      {
         "index" : 28,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.0588, "maximum" : 0.1176 }
      },
      {
         "index" : 29,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0588 }
      },
      {
         "index" : 30,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 31,
         "hscan" : { "minimum" : 0.9655, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 32,
         "hscan" : { "minimum" : 0.9310, "maximum" : 0.9655 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 33,
         "hscan" : { "minimum" : 0.8966, "maximum" : 0.9310 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 34,
         "hscan" : { "minimum" : 0.8621, "maximum" : 0.8966 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 35,
         "hscan" : { "minimum" : 0.8276, "maximum" : 0.8621 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 36,
         "hscan" : { "minimum" : 0.7931, "maximum" : 0.8276 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 37,
         "hscan" : { "minimum" : 0.7586, "maximum" : 0.7931 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 38,
         "hscan" : { "minimum" : 0.7241, "maximum" : 0.7586 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 39,
         "hscan" : { "minimum" : 0.6897, "maximum" : 0.7241 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 40,
         "hscan" : { "minimum" : 0.6552, "maximum" : 0.6897 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 41,
         "hscan" : { "minimum" : 0.6207, "maximum" : 0.6552 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 42,
         "hscan" : { "minimum" : 0.5862, "maximum" : 0.6207 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 43,
         "hscan" : { "minimum" : 0.5517, "maximum" : 0.5862 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 44,
         "hscan" : { "minimum" : 0.5172, "maximum" : 0.5517 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 45,
         "hscan" : { "minimum" : 0.4828, "maximum" : 0.5172 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 46,
         "hscan" : { "minimum" : 0.4483, "maximum" : 0.4828 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 47,
         "hscan" : { "minimum" : 0.4138, "maximum" : 0.4483 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 48,
         "hscan" : { "minimum" : 0.3793, "maximum" : 0.4138 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 49,
         "hscan" : { "minimum" : 0.3448, "maximum" : 0.3793 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 50,
         "hscan" : { "minimum" : 0.3103, "maximum" : 0.3448 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 51,
         "hscan" : { "minimum" : 0.2759, "maximum" : 0.3103 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 52,
         "hscan" : { "minimum" : 0.2414, "maximum" : 0.2759 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 53,
         "hscan" : { "minimum" : 0.2069, "maximum" : 0.2414 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 54,
         "hscan" : { "minimum" : 0.1724, "maximum" : 0.2069 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 55,
         "hscan" : { "minimum" : 0.1379, "maximum" : 0.1724 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 56,
         "hscan" : { "minimum" : 0.1034, "maximum" : 0.1379 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 57,
         "hscan" : { "minimum" : 0.0690, "maximum" : 0.1034 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 58,
         "hscan" : { "minimum" : 0.0345, "maximum" : 0.0690 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 59,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0345 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 60,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 61,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0588 }
      },
      {
         "index" : 62,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.0588, "maximum" : 0.1176 }
      },
      {
         "index" : 63,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.1176, "maximum" : 0.1765 }
      },
      {
         "index" : 64,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.1765, "maximum" : 0.2353 }
      },
      {
         "index" : 65,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.2353, "maximum" : 0.2941 }
      },
      {
         "index" : 66,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.2941, "maximum" : 0.3529 }
      },
      {
         "index" : 67,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.3529, "maximum" : 0.4118 }
      },
      {
         "index" : 68,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.4118, "maximum" : 0.4706 }
      },
      {
         "index" : 69,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.4706, "maximum" : 0.5294 }
      },
      {
         "index" : 70,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.5294, "maximum" : 0.5882 }
      },
      {
         "index" : 71,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.5882, "maximum" : 0.6471 }
      },
      {
         "index" : 72,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.6471, "maximum" : 0.7059 }
      },
      {
         "index" : 73,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.7059, "maximum" : 0.7647 }
      },
      {
         "index" : 74,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.7647, "maximum" : 0.8235 }
      },
      {
         "index" : 75,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.8235, "maximum" : 0.8824 }
      },
      {
         "index" : 76,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.8824, "maximum" : 0.9412 }
      },
      {
         "index" : 77,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.9412, "maximum" : 1.0000 }
      },
      {
         "index" : 78,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 79,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0345 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 80,
         "hscan" : { "minimum" : 0.0345, "maximum" : 0.0690 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 81,
         "hscan" : { "minimum" : 0.0690, "maximum" : 0.1034 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 82,
         "hscan" : { "minimum" : 0.1034, "maximum" : 0.1379 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 83,
         "hscan" : { "minimum" : 0.1379, "maximum" : 0.1724 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 84,
         "hscan" : { "minimum" : 0.1724, "maximum" : 0.2069 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 85,
         "hscan" : { "minimum" : 0.2069, "maximum" : 0.2414 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 86,
         "hscan" : { "minimum" : 0.2414, "maximum" : 0.2759 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 87,
         "hscan" : { "minimum" : 0.2759, "maximum" : 0.3103 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 88,
         "hscan" : { "minimum" : 0.3103, "maximum" : 0.3448 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 89,
         "hscan" : { "minimum" : 0.3448, "maximum" : 0.3793 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 90,
         "hscan" : { "minimum" : 0.3793, "maximum" : 0.4138 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      }
   ],

   "endOfJson" : "endOfJson"
}


5. Screenshots von Hyperion im Anhang.

6. Siehe Anhang im Bild.

7. Mit der App funktioniert die Ansteuerung, farben werden gewechselt, kein flackern!

8. Siehe Bild im Anhang.

Weiß echt nicht an was es liegt, aber vllt findet ja jemand einen Fehler..
Danke auf jeden Fall :)

pommes
Neuling

Beiträge:12
Registriert:9. Apr 2016

LED flackern/leuchten/blinken

14. Mai 2016, 11:29

hatte probleme alles in einen Post zu machen, sorry!
Dateianhänge
hyp_4.PNG
hyp_3.PNG
hyp_2.PNG
hyp_1.PNG
LED_Anordnung_vorne.PNG
LED_Anordnung_vorne.PNG (6.27 KiB) 9447 mal betrachtet
befehl_putty.PNG

BERLINHIMMEL
Mitglied

Beiträge:103
Registriert:27. Mar 2016
Wohnort:Berlin

LED flackern/leuchten/blinken

14. Mai 2016, 19:16

Mal grob ins dunkle getippt, aber ich sehe anhand der Fotos deiner Stripes das du offensichtlich nur an einer Stelle Strom einspeist und zwar am Anfang der LEDs. Versuche mal testweise vom Netzteil aus eine weitere Stromzuspeisung zu legen an einen der Lötpunkte (z.B. halber Strecke) und schau, ob das flackern besser wird. Da ja kaum Power auf den Kabeln ist, reicht auch ein ranhalten der Kabelenden am Stripe (an der richtigen Stelle natürlich) vom Netzteil.

Alternativ kann man auch mal ein weißes Testbild ansehen und schauen, wie die LED's so reagieren. Ich habe eine rund 7 Meter Strecke hinter einer Leinwand angebracht und hatte kein richtigen Weißton sondern es wurde immer mehr rosa und dann rot am Ende. Die Grundfarben (RGB) waren hingegen so weit korrekt. Erst als ich an allen Ecken neu Strom eingespeist habe, waren die LED'S weiß.

Ansonsten sehe ich auf dem Foto auch, dass die Kabel zur Lichtansteuerung (die drei dünnen vom Pi) direkt an einem Stromkabel vorbei führen. Stromkabel können Störsignale liefern. Trenne ggf. mal die Kabel etwas voneinander oder wickle es mal in Alufolie ein.
Mein Projekt "Ambilight hinter eine Leinwand" erfolgreich abgeschlossen.

pommes
Neuling

Beiträge:12
Registriert:9. Apr 2016

LED flackern/leuchten/blinken

15. Mai 2016, 08:59

Danke für die Tipps, werde beides mal ausprobieren! Dachte das evtl an der Software etwas nicht stimmt, da es bei einfarbigen Bildern und App kein flackern gibt.

pommes
Neuling

Beiträge:12
Registriert:9. Apr 2016

LED flackern/leuchten/blinken

15. Mai 2016, 11:41

Ich hab gerade das Problem, dass wenn ich Kodi starte, das ambilight im hauptmenü für ungefähr 10sekunden geht, dann schaltet es sich aus..
Laut einstellungen in hyperion müsste es doch aber im menü anbleiben?! (Also habe einen haken im menü gesetzt).

BERLINHIMMEL
Mitglied

Beiträge:103
Registriert:27. Mar 2016
Wohnort:Berlin

LED flackern/leuchten/blinken

15. Mai 2016, 22:10

Also wenn ich deine confi Datei einsehe, ist dort das Ambilight im KODI Menü von dir deaktiviert.

Öffne mal die "hyperion.config.json" (Liegt im Ordner "Configfiles") und suche hier nach dem Eintrag: "grabMenu" (Mittels Strg + F in einem Editor)

In deinem Fall steht da:

Code: Alles auswählen

"grabMenu" : false,

Es sollte aber heißen:
"grabMenu" : true,
Mein Projekt "Ambilight hinter eine Leinwand" erfolgreich abgeschlossen.

pommes
Neuling

Beiträge:12
Registriert:9. Apr 2016

LED flackern/leuchten/blinken

16. Mai 2016, 18:50

danke dir, geht wieder :)

und hab alufolie um die datenleitungen zum pi gewickelt, das flackern ist jetzt weg :D
Hoffe es bleibt auch so!

vielen dank dir!

Artur190
Mitglied

Beiträge:46
Registriert:27. Nov 2015

LED flackern/leuchten/blinken

24. Jun 2017, 15:43

Seit paar Wochen flackern bei mir Leds auch. Am Anfang hat alles funktioniert, und seit dem hab ich nichts geändert.

Donald
Moderator

Beiträge:1255
Registriert:15. Nov 2015

LED flackern/leuchten/blinken

24. Jun 2017, 19:57

Der wahrscheinlichste Grund für das Flackern ist Störeinstrahlung. Dazu musst du auch deiner Ambilightinstallation auch gar nichts geändert haben, es reicht schon ein Lichtschalter, eine Stromleitung in der Nähe, Lautsprecherboxen, DECT Telefone, WLAN Router, LTE Empfänger und vieles mehr.
Durch Schirmung der Data&Clock Leitung bekommt man das aber in den Griff.

Artur190
Mitglied

Beiträge:46
Registriert:27. Nov 2015

LED flackern/leuchten/blinken

24. Jun 2017, 20:06

Ok werde ich versuchen, aber ich habe nichts geändert, auch in der nähe ist alles gleich geblieben. Nur sehe ich gerade dass ich neue Anleitung weird led leiste von beiden Seiten an plus angeschlossen und auch masse an gpio. Als ich es noch zusammen gebaut habe, stand es in Anleitung auf powerpi seite nicht

jarvis121
Mitglied

Beiträge:32
Registriert:27. Nov 2016

LED flackern/leuchten/blinken

26. Jun 2017, 09:09

Wie stark ist dein Netzteil? Ich hab mich totgesucht weil ich den gleichen Fehler hatte. Habe knapp unter 5m LEDs an nem 65" tv und Speise an vier stellen ein. Dazu nutze ich ein 26A Netzteil. Das flackern hat mich wahnsinnig gemacht


Gesendet von iPhone mit Tapatalk

Insight
Mitglied

Beiträge:64
Registriert:16. Apr 2017

LED flackern/leuchten/blinken

16. Jul 2017, 14:25

Hallo alle miteinander,

Bei mir blinkt es auch...sehr viel. Die Wahrscheinlichkeit, dass evtl durch Spannungsschwankungen eine Unterversorgung stattfindet stelle ich mal als wahrscheinlich dar. Warum?

Ich habe habe ein Schaltnetzteil Meanwell 50-5. Meine Toleranz liegt bei 4,75 und 5,25V, die ich per Regler einstellen kann.

Umso höher ich gehe (+5V) umso mehr flackert es.
Ich bin jetzt nicht der Crack in Elektrotechnik, aber ich schätze das mein aktuelles Netzteil bei 140 LEDs (4,37 m) nicht ausreichend ist. Ich habe mir jetzt ein neues bestellt, 100-5, wo ich mehr Spielraum habe.

Ich hoffe, dass ich dort das Geflacker abstellen kann.

@Jarvis
Ich nehme an, dass du dein Netzteil upgegradet hast?

jarvis121
Mitglied

Beiträge:32
Registriert:27. Nov 2016

LED flackern/leuchten/blinken

16. Jul 2017, 19:34

Insight hat geschrieben:Hallo alle miteinander,

Bei mir blinkt es auch...sehr viel. Die Wahrscheinlichkeit, dass evtl durch Spannungsschwankungen eine Unterversorgung stattfindet stelle ich mal als wahrscheinlich dar. Warum?

Ich habe habe ein Schaltnetzteil Meanwell 50-5. Meine Toleranz liegt bei 4,75 und 5,25V, die ich per Regler einstellen kann.

Umso höher ich gehe (+5V) umso mehr flackert es.
Ich bin jetzt nicht der Crack in Elektrotechnik, aber ich schätze das mein aktuelles Netzteil bei 140 LEDs (4,37 m) nicht ausreichend ist. Ich habe mir jetzt ein neues bestellt, 100-5, wo ich mehr Spielraum habe.

Ich hoffe, dass ich dort das Geflacker abstellen kann.

@Jarvis
Ich nehme an, dass du dein Netzteil upgegradet hast?


Definitiv. Wie gesagt, ich hab ein meanwell 126W Schaltnetzteil.


Gesendet von iPhone mit Tapatalk

Insight
Mitglied

Beiträge:64
Registriert:16. Apr 2017

LED flackern/leuchten/blinken

17. Jul 2017, 16:07

Alles klar. Ich bastel in ein paar Tagen weiter.

Hast du ein piepen btw? Zufällig ein netzfilter im Einsatz der hilft?

jarvis121
Mitglied

Beiträge:32
Registriert:27. Nov 2016

LED flackern/leuchten/blinken

17. Jul 2017, 21:24

Insight hat geschrieben:Alles klar. Ich bastel in ein paar Tagen weiter.

Hast du ein piepen btw? Zufällig ein netzfilter im Einsatz der hilft?

Hab ich beides nicht. Viel Erfolg


Gesendet von iPhone mit Tapatalk

Zurück zu „Ambilight - Support“