Es lief auch alles soweit. Habe dann am Wochenende noch etwas in Hypercon verändert. Am nächsten Tag ging nix mehr.
Habe schon die Lötstellen kontrolliert ->i.o.
Raspbian Jessie mehrmals neu installiert ->i.o.
Hyperion auf dem Pi neu installiert -> scheint auch i.o.
Den Pi an den Rest LED's (auf Rolle) angeschlossen -> ohne Erfolg
Ohne Pi angeschlossen leuchten die LED's sporadisch
Mit Pi, gleiche Ergebnis
Hier meine Konfiguration:
LED's: WS2801
Ambilight läuft über HDMI nach der Anleitung von PowerPi
Raspbian Jessie Pixel Rev. 07.05.2017
Laufrichtung der LED's: Uhrzeigersinn
Start LED's: oben links
über die APP kann ich mich nicht einloggen.
Weiß nicht ob das an den Einstellungen liegt.
Verkabelung:
Code: Alles auswählen
config.txt
# For more options and information see
# http://rpf.io/configtxt
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
#hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
#dtparam=i2c_arm=on
#dtparam=i2s=on
#dtparam=spi=on
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
dtparam=spi=on
# Ambilight Modul aktivieren
dtparam=spi=on
dtparam=spi=on
dtparam=spi=on
dtparam=spi=on
dtparam=spi=on
dtparam=spi=on
dtparam=spi=on
Code: Alles auswählen
hyperion.config.json
// Automatically generated configuration file for Hyperion ambilight daemon
// Notice: All values are explained with comments at our wiki: wiki.hyperion-project.org (config area)
// Generated by: HyperCon (The Hyperion deamon configuration file builder)
// Created with HyperCon V1.03.3 (22.10.2017)
{
// DEVICE CONFIGURATION
"device" :
{
"name" : "LG Ambilight",
"type" : "ws2801",
"output" : "/dev/spidev0.0",
"rate" : 1000000,
"colorOrder" : "rgb"
},
// COLOR CALIBRATION CONFIG
"color" :
{
"channelAdjustment" :
[
{
"id" : "default",
"leds" : "*",
"pureRed" :
{
"redChannel" : 255,
"greenChannel" : 0,
"blueChannel" : 0
},
"pureGreen" :
{
"redChannel" : 0,
"greenChannel" : 255,
"blueChannel" : 0
},
"pureBlue" :
{
"redChannel" : 0,
"greenChannel" : 0,
"blueChannel" : 255
}
}
],
"temperature" :
[
{
"id" : "default",
"leds" : "*",
"correctionValues" :
{
"red" : 255,
"green" : 255,
"blue" : 255
}
}
],
"transform" :
[
{
"id" : "default",
"leds" : "*",
"hsl" :
{
"saturationGain" : 1.0000,
"luminanceGain" : 1.0000,
"luminanceMinimum" : 0.0000
},
"red" :
{
"threshold" : 0.0000,
"gamma" : 2.5000
},
"green" :
{
"threshold" : 0.0000,
"gamma" : 2.5000
},
"blue" :
{
"threshold" : 0.0000,
"gamma" : 2.5000
}
}
],
// SMOOTHING CONFIG
"smoothing" :
{
"type" : "linear",
"time_ms" : 200,
"updateFrequency" : 20.0000,
"updateDelay" : 0
}
},
// V4L2 GRABBER CONFIG
"grabber-v4l2" :
{
"device" : "/dev/video0",
"input" : 0,
"standard" : "PAL",
"width" : -1,
"height" : -1,
"frameDecimation" : 2,
"sizeDecimation" : 8,
"priority" : 900,
"mode" : "2D",
"cropLeft" : 0,
"cropRight" : 0,
"cropTop" : 0,
"cropBottom" : 0,
"redSignalThreshold" : 0.0,
"greenSignalThreshold" : 0.0,
"blueSignalThreshold" : 0.0
},
// BLACKBORDER CONFIG
"blackborderdetector" :
{
"enable" : true,
"threshold" : 0.2,
"unknownFrameCnt" : 600,
"borderFrameCnt" : 50,
"maxInconsistentCnt" : 10,
"blurRemoveCnt" : 1,
"mode" : "default"
},
// BOOTEFFECT CONFIG
"bootsequence" :
{
"color" : [0,0,0],
"effect" : "Rainbow swirl fast",
"duration_ms" : 5000,
"priority" : 700
},
// JSON SERVER CONFIG
"jsonServer" :
{
"port" : 19444
},
// PROTO SERVER CONFIG
"protoServer" :
{
"port" : 19445
},
// EFFECT PATH
"effects" :
{
"paths" :
[
"/storage/hyperion/effects",
"/usr/share/hyperion/effects"
]
},
// NO FRAME GRABBER CONFIG
// NO KODI CHECK CONFIG
// NO BOBLIGHT SERVER CONFIG
// NO JSON/PROTO FORWARD CONFIG
// LED CONFIGURATION
"leds" :
[
{
"index" : 0,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0278 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 1,
"hscan" : { "minimum" : 0.0278, "maximum" : 0.0556 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 2,
"hscan" : { "minimum" : 0.0556, "maximum" : 0.0833 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 3,
"hscan" : { "minimum" : 0.0833, "maximum" : 0.1111 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 4,
"hscan" : { "minimum" : 0.1111, "maximum" : 0.1389 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 5,
"hscan" : { "minimum" : 0.1389, "maximum" : 0.1667 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 6,
"hscan" : { "minimum" : 0.1667, "maximum" : 0.1944 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 7,
"hscan" : { "minimum" : 0.1944, "maximum" : 0.2222 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 8,
"hscan" : { "minimum" : 0.2222, "maximum" : 0.2500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 9,
"hscan" : { "minimum" : 0.2500, "maximum" : 0.2778 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 10,
"hscan" : { "minimum" : 0.2778, "maximum" : 0.3056 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 11,
"hscan" : { "minimum" : 0.3056, "maximum" : 0.3333 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 12,
"hscan" : { "minimum" : 0.3333, "maximum" : 0.3611 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 13,
"hscan" : { "minimum" : 0.3611, "maximum" : 0.3889 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 14,
"hscan" : { "minimum" : 0.3889, "maximum" : 0.4167 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 15,
"hscan" : { "minimum" : 0.4167, "maximum" : 0.4444 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 16,
"hscan" : { "minimum" : 0.4444, "maximum" : 0.4722 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 17,
"hscan" : { "minimum" : 0.4722, "maximum" : 0.5000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 18,
"hscan" : { "minimum" : 0.5000, "maximum" : 0.5278 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 19,
"hscan" : { "minimum" : 0.5278, "maximum" : 0.5556 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 20,
"hscan" : { "minimum" : 0.5556, "maximum" : 0.5833 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 21,
"hscan" : { "minimum" : 0.5833, "maximum" : 0.6111 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 22,
"hscan" : { "minimum" : 0.6111, "maximum" : 0.6389 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 23,
"hscan" : { "minimum" : 0.6389, "maximum" : 0.6667 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 24,
"hscan" : { "minimum" : 0.6667, "maximum" : 0.6944 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 25,
"hscan" : { "minimum" : 0.6944, "maximum" : 0.7222 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 26,
"hscan" : { "minimum" : 0.7222, "maximum" : 0.7500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 27,
"hscan" : { "minimum" : 0.7500, "maximum" : 0.7778 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 28,
"hscan" : { "minimum" : 0.7778, "maximum" : 0.8056 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 29,
"hscan" : { "minimum" : 0.8056, "maximum" : 0.8333 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 30,
"hscan" : { "minimum" : 0.8333, "maximum" : 0.8611 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 31,
"hscan" : { "minimum" : 0.8611, "maximum" : 0.8889 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 32,
"hscan" : { "minimum" : 0.8889, "maximum" : 0.9167 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 33,
"hscan" : { "minimum" : 0.9167, "maximum" : 0.9444 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 34,
"hscan" : { "minimum" : 0.9444, "maximum" : 0.9722 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 35,
"hscan" : { "minimum" : 0.9722, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 36,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0455 }
},
{
"index" : 37,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0455, "maximum" : 0.0909 }
},
{
"index" : 38,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0909, "maximum" : 0.1364 }
},
{
"index" : 39,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.1364, "maximum" : 0.1818 }
},
{
"index" : 40,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.1818, "maximum" : 0.2273 }
},
{
"index" : 41,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.2273, "maximum" : 0.2727 }
},
{
"index" : 42,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.2727, "maximum" : 0.3182 }
},
{
"index" : 43,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.3182, "maximum" : 0.3636 }
},
{
"index" : 44,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.3636, "maximum" : 0.4091 }
},
{
"index" : 45,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.4091, "maximum" : 0.4545 }
},
{
"index" : 46,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.4545, "maximum" : 0.5000 }
},
{
"index" : 47,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.5000, "maximum" : 0.5455 }
},
{
"index" : 48,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.5455, "maximum" : 0.5909 }
},
{
"index" : 49,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.5909, "maximum" : 0.6364 }
},
{
"index" : 50,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.6364, "maximum" : 0.6818 }
},
{
"index" : 51,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.6818, "maximum" : 0.7273 }
},
{
"index" : 52,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.7273, "maximum" : 0.7727 }
},
{
"index" : 53,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.7727, "maximum" : 0.8182 }
},
{
"index" : 54,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.8182, "maximum" : 0.8636 }
},
{
"index" : 55,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.8636, "maximum" : 0.9091 }
},
{
"index" : 56,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.9091, "maximum" : 0.9545 }
},
{
"index" : 57,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.9545, "maximum" : 1.0000 }
},
{
"index" : 58,
"hscan" : { "minimum" : 0.9722, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 59,
"hscan" : { "minimum" : 0.9444, "maximum" : 0.9722 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 60,
"hscan" : { "minimum" : 0.9167, "maximum" : 0.9444 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 61,
"hscan" : { "minimum" : 0.8889, "maximum" : 0.9167 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 62,
"hscan" : { "minimum" : 0.8611, "maximum" : 0.8889 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 63,
"hscan" : { "minimum" : 0.8333, "maximum" : 0.8611 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 64,
"hscan" : { "minimum" : 0.8056, "maximum" : 0.8333 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 65,
"hscan" : { "minimum" : 0.7778, "maximum" : 0.8056 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 66,
"hscan" : { "minimum" : 0.7500, "maximum" : 0.7778 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 67,
"hscan" : { "minimum" : 0.7222, "maximum" : 0.7500 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 68,
"hscan" : { "minimum" : 0.6944, "maximum" : 0.7222 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 69,
"hscan" : { "minimum" : 0.6667, "maximum" : 0.6944 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 70,
"hscan" : { "minimum" : 0.6389, "maximum" : 0.6667 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 71,
"hscan" : { "minimum" : 0.6111, "maximum" : 0.6389 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 72,
"hscan" : { "minimum" : 0.5833, "maximum" : 0.6111 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 73,
"hscan" : { "minimum" : 0.5556, "maximum" : 0.5833 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 74,
"hscan" : { "minimum" : 0.5278, "maximum" : 0.5556 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 75,
"hscan" : { "minimum" : 0.5000, "maximum" : 0.5278 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 76,
"hscan" : { "minimum" : 0.4722, "maximum" : 0.5000 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 77,
"hscan" : { "minimum" : 0.4444, "maximum" : 0.4722 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 78,
"hscan" : { "minimum" : 0.4167, "maximum" : 0.4444 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 79,
"hscan" : { "minimum" : 0.3889, "maximum" : 0.4167 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 80,
"hscan" : { "minimum" : 0.3611, "maximum" : 0.3889 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 81,
"hscan" : { "minimum" : 0.3333, "maximum" : 0.3611 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 82,
"hscan" : { "minimum" : 0.3056, "maximum" : 0.3333 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 83,
"hscan" : { "minimum" : 0.2778, "maximum" : 0.3056 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 84,
"hscan" : { "minimum" : 0.2500, "maximum" : 0.2778 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 85,
"hscan" : { "minimum" : 0.2222, "maximum" : 0.2500 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 86,
"hscan" : { "minimum" : 0.1944, "maximum" : 0.2222 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 87,
"hscan" : { "minimum" : 0.1667, "maximum" : 0.1944 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 88,
"hscan" : { "minimum" : 0.1389, "maximum" : 0.1667 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 89,
"hscan" : { "minimum" : 0.1111, "maximum" : 0.1389 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 90,
"hscan" : { "minimum" : 0.0833, "maximum" : 0.1111 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 91,
"hscan" : { "minimum" : 0.0556, "maximum" : 0.0833 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 92,
"hscan" : { "minimum" : 0.0278, "maximum" : 0.0556 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 93,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0278 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 94,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.9545, "maximum" : 1.0000 }
},
{
"index" : 95,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.9091, "maximum" : 0.9545 }
},
{
"index" : 96,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.8636, "maximum" : 0.9091 }
},
{
"index" : 97,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.8182, "maximum" : 0.8636 }
},
{
"index" : 98,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.7727, "maximum" : 0.8182 }
},
{
"index" : 99,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.7273, "maximum" : 0.7727 }
},
{
"index" : 100,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.6818, "maximum" : 0.7273 }
},
{
"index" : 101,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.6364, "maximum" : 0.6818 }
},
{
"index" : 102,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.5909, "maximum" : 0.6364 }
},
{
"index" : 103,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.5455, "maximum" : 0.5909 }
},
{
"index" : 104,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.5000, "maximum" : 0.5455 }
},
{
"index" : 105,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.4545, "maximum" : 0.5000 }
},
{
"index" : 106,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.4091, "maximum" : 0.4545 }
},
{
"index" : 107,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.3636, "maximum" : 0.4091 }
},
{
"index" : 108,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.3182, "maximum" : 0.3636 }
},
{
"index" : 109,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.2727, "maximum" : 0.3182 }
},
{
"index" : 110,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.2273, "maximum" : 0.2727 }
},
{
"index" : 111,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.1818, "maximum" : 0.2273 }
},
{
"index" : 112,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.1364, "maximum" : 0.1818 }
},
{
"index" : 113,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.0909, "maximum" : 0.1364 }
},
{
"index" : 114,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.0455, "maximum" : 0.0909 }
},
{
"index" : 115,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0455 }
}
],
"endOfJson" : "endOfJson"
}
Hier auch der LOG aus Hypercon:
Code: Alles auswählen
SSH Traffic:
ssh connected
ssh out: sudo journalctl -u hyperion.service 2>/dev/null
ssh in: -- Logs begin at Do 2018-03-22 18:17:01 CET, end at Fr 2018-03-23 00:24:01 CET. --
ssh in: Mᅢᄂr 22 18:17:03 raspberrypi systemd[1]: Starting Hyperion Systemd service...
ssh in: Mᅢᄂr 22 18:17:03 raspberrypi systemd[1]: Started Hyperion Systemd service.
ssh in: Mᅢᄂr 22 18:17:05 raspberrypi hyperiond[437]: Hyperion Ambilight Deamon (437)
ssh in: Mᅢᄂr 22 18:17:05 raspberrypi hyperiond[437]: Version : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388
ssh in: Mᅢᄂr 22 18:17:05 raspberrypi hyperiond[437]: Build Time: Jun 3 2017 02:06:37
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: HYPERION INFO: ColorTransform 'default' => [0; 115]
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: HYPERION INFO: ColorCorrection 'default' => [0; 115]
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: HYPERION INFO: ColorAdjustment 'default' => [0; 115]
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: LEDDEVICE INFO: configuration:
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: {
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: "colorOrder" : "rgb",
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: "name" : "LG Ambilight",
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: "output" : "/dev/spidev0.0",
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: "rate" : 1000000,
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: "type" : "ws2801"
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: }
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: INFO: Creating linear smoothing
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: INFO: Hyperion started and initialised
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: BLACKBORDER INFO: threshold set to 0.2 (51)
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: BLACKBORDER INFO: mode:default
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: started
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: INFO: Json server created and started on port 19444
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: INFO: Proto server created and started on port 19445
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: V4L2GRABBER INFO: width=720 height=576
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: V4L2GRABBER INFO: pixel format=YUYV
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: BLACKBORDER INFO: threshold set to 0.2 (51)
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: BLACKBORDER INFO: mode:default
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: V4L2GRABBER INFO: signal threshold set to: {0,0,0}
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: V4L2GRABBER INFO: started
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: INFO: V4L2 grabber created and started
ssh in: Mᅢᄂr 22 18:17:07 raspberrypi hyperiond[437]: BORDER SWITCH REQUIRED!!
ssh in: Mᅢᄂr 22 18:17:07 raspberrypi hyperiond[437]: CURRENT BORDER TYPE: unknown=0 hor.size=3 vert.size=3
ssh in: Mᅢᄂr 22 18:17:07 raspberrypi hyperiond[437]: V4L2GRABBER INFO: stopped
ssh in: Mᅢᄂr 22 18:17:11 raspberrypi hyperiond[437]: V4L2GRABBER INFO: started
ssh in: Mᅢᄂr 22 18:17:11 raspberrypi hyperiond[437]: EFFECTENGINE INFO: effect finished
ssh in: Mᅢᄂr 22 18:17:15 raspberrypi hyperiond[437]: BORDER SWITCH REQUIRED!!
ssh in: Mᅢᄂr 22 18:17:15 raspberrypi hyperiond[437]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=3
ssh in: Mᅢᄂr 22 20:32:39 raspberrypi systemd[1]: Stopping Hyperion Systemd service...
ssh in: Mᅢᄂr 22 20:32:39 raspberrypi hyperiond[437]: INFO: Application closed with code 0
ssh in: Mᅢᄂr 22 20:32:39 raspberrypi hyperiond[437]: V4L2GRABBER INFO: stopped
ssh in: Mᅢᄂr 22 20:32:39 raspberrypi hyperiond[437]: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: Mᅢᄂr 22 20:32:39 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi systemd[1]: Starting Hyperion Systemd service...
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi systemd[1]: Started Hyperion Systemd service.
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: Hyperion Ambilight Deamon (1090)
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: Version : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: Build Time: Jun 3 2017 02:06:37
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: HYPERION INFO: ColorTransform 'default' => [0; 115]
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: HYPERION INFO: ColorCorrection 'default' => [0; 115]
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: HYPERION INFO: ColorAdjustment 'default' => [0; 115]
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: LEDDEVICE INFO: configuration:
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: {
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: "colorOrder" : "rgb",
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: "name" : "LG Ambilight",
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: "output" : "/dev/spidev0.0",
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: "rate" : 1000000,
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: "type" : "ws2801"
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: }
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: INFO: Creating linear smoothing
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: INFO: Hyperion started and initialised
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: BLACKBORDER INFO: threshold set to 0.2 (51)
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: BLACKBORDER INFO: mode:default
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: started
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: INFO: Json server created and started on port 19444
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: INFO: Proto server created and started on port 19445
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: V4L2GRABBER INFO: width=720 height=576
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: V4L2GRABBER INFO: pixel format=YUYV
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: BLACKBORDER INFO: threshold set to 0.2 (51)
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: BLACKBORDER INFO: mode:default
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: V4L2GRABBER INFO: signal threshold set to: {0,0,0}
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: V4L2GRABBER INFO: started
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: INFO: V4L2 grabber created and started
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: BORDER SWITCH REQUIRED!!
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=3
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: V4L2GRABBER INFO: stopped
ssh in: Mᅢᄂr 22 20:32:45 raspberrypi hyperiond[1090]: EFFECTENGINE INFO: effect finished
ssh in: Mᅢᄂr 22 20:32:45 raspberrypi hyperiond[1090]: V4L2GRABBER INFO: started
ssh in: Mᅢᄂr 22 20:33:09 raspberrypi systemd[1]: Stopping Hyperion Systemd service...
ssh in: Mᅢᄂr 22 20:33:09 raspberrypi hyperiond[1090]: INFO: Application closed with code 0
ssh in: Mᅢᄂr 22 20:33:09 raspberrypi hyperiond[1090]: V4L2GRABBER INFO: stopped
ssh in: Mᅢᄂr 22 20:33:09 raspberrypi hyperiond[1090]: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: Mᅢᄂr 22 20:33:09 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
ssh in: Mᅢᄂr 23 00:23:18 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi systemd[1]: Starting Hyperion Systemd service...
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi systemd[1]: Started Hyperion Systemd service.
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: Hyperion Ambilight Deamon (1325)
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: Version : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: Build Time: Jun 3 2017 02:06:37
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: HYPERION INFO: ColorTransform 'default' => [0; 115]
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: HYPERION INFO: ColorCorrection 'default' => [0; 115]
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: HYPERION INFO: ColorAdjustment 'default' => [0; 115]
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: LEDDEVICE INFO: configuration:
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: {
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: "colorOrder" : "rgb",
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: "name" : "LG Ambilight",
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: "output" : "/dev/spidev0.0",
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: "rate" : 1000000,
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: "type" : "ws2801"
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: }
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: INFO: Creating linear smoothing
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: INFO: Hyperion started and initialised
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: BLACKBORDER INFO: threshold set to 0.2 (51)
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: BLACKBORDER INFO: mode:default
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: started
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: INFO: Json server created and started on port 19444
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: INFO: Proto server created and started on port 19445
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: V4L2GRABBER INFO: width=720 height=576
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: V4L2GRABBER INFO: pixel format=YUYV
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: BLACKBORDER INFO: threshold set to 0.2 (51)
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: BLACKBORDER INFO: mode:default
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: V4L2GRABBER INFO: signal threshold set to: {0,0,0}
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: V4L2GRABBER INFO: started
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: INFO: V4L2 grabber created and started
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: BORDER SWITCH REQUIRED!!
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=3
ssh in: Mᅢᄂr 23 00:23:20 raspberrypi hyperiond[1325]: V4L2GRABBER INFO: stopped
ssh in: Mᅢᄂr 23 00:23:24 raspberrypi hyperiond[1325]: EFFECTENGINE INFO: effect finished
ssh in: Mᅢᄂr 23 00:23:25 raspberrypi hyperiond[1325]: V4L2GRABBER INFO: started
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi systemd[1]: Stopping Hyperion Systemd service...
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1325]: INFO: Application closed with code 0
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1325]: V4L2GRABBER INFO: stopped
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1325]: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi systemd[1]: Starting Hyperion Systemd service...
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi systemd[1]: Started Hyperion Systemd service.
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: Hyperion Ambilight Deamon (1355)
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: Version : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: Build Time: Jun 3 2017 02:06:37
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: HYPERION INFO: ColorTransform 'default' => [0; 115]
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: HYPERION INFO: ColorCorrection 'default' => [0; 115]
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: HYPERION INFO: ColorAdjustment 'default' => [0; 115]
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: LEDDEVICE INFO: configuration:
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: {
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: "colorOrder" : "rgb",
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: "name" : "LG Ambilight",
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: "output" : "/dev/spidev0.0",
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: "rate" : 1000000,
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: "type" : "ws2801"
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: }
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: INFO: Creating linear smoothing
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: INFO: Hyperion started and initialised
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: BLACKBORDER INFO: threshold set to 0.2 (51)
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: BLACKBORDER INFO: mode:default
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: started
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: INFO: Json server created and started on port 19444
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: INFO: Proto server created and started on port 19445
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: V4L2GRABBER INFO: width=720 height=576
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: V4L2GRABBER INFO: pixel format=YUYV
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: BLACKBORDER INFO: threshold set to 0.2 (51)
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: BLACKBORDER INFO: mode:default
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: V4L2GRABBER INFO: signal threshold set to: {0,0,0}
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: V4L2GRABBER INFO: started
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: INFO: V4L2 grabber created and started
ssh in: Mᅢᄂr 23 00:23:31 raspberrypi hyperiond[1355]: BORDER SWITCH REQUIRED!!
ssh in: Mᅢᄂr 23 00:23:31 raspberrypi hyperiond[1355]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=3
ssh in: Mᅢᄂr 23 00:23:31 raspberrypi hyperiond[1355]: V4L2GRABBER INFO: stopped
ssh in: Mᅢᄂr 23 00:23:36 raspberrypi hyperiond[1355]: EFFECTENGINE INFO: effect finished
ssh in: Mᅢᄂr 23 00:23:36 raspberrypi hyperiond[1355]: V4L2GRABBER INFO: started
ssh out: sudo journalctl -u hyperion.service 2>/dev/null
ssh in: -- Logs begin at Do 2018-03-22 18:17:01 CET, end at Fr 2018-03-23 00:28:50 CET. --
ssh in: Mᅢᄂr 22 18:17:03 raspberrypi systemd[1]: Starting Hyperion Systemd service...
ssh in: Mᅢᄂr 22 18:17:03 raspberrypi systemd[1]: Started Hyperion Systemd service.
ssh in: Mᅢᄂr 22 18:17:05 raspberrypi hyperiond[437]: Hyperion Ambilight Deamon (437)
ssh in: Mᅢᄂr 22 18:17:05 raspberrypi hyperiond[437]: Version : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388
ssh in: Mᅢᄂr 22 18:17:05 raspberrypi hyperiond[437]: Build Time: Jun 3 2017 02:06:37
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: HYPERION INFO: ColorTransform 'default' => [0; 115]
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: HYPERION INFO: ColorCorrection 'default' => [0; 115]
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: HYPERION INFO: ColorAdjustment 'default' => [0; 115]
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: LEDDEVICE INFO: configuration:
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: {
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: "colorOrder" : "rgb",
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: "name" : "LG Ambilight",
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: "output" : "/dev/spidev0.0",
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: "rate" : 1000000,
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: "type" : "ws2801"
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: }
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: INFO: Creating linear smoothing
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: INFO: Hyperion started and initialised
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: BLACKBORDER INFO: threshold set to 0.2 (51)
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: BLACKBORDER INFO: mode:default
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: started
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: INFO: Json server created and started on port 19444
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: INFO: Proto server created and started on port 19445
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: V4L2GRABBER INFO: width=720 height=576
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: V4L2GRABBER INFO: pixel format=YUYV
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: BLACKBORDER INFO: threshold set to 0.2 (51)
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: BLACKBORDER INFO: mode:default
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: V4L2GRABBER INFO: signal threshold set to: {0,0,0}
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: V4L2GRABBER INFO: started
ssh in: Mᅢᄂr 22 18:17:06 raspberrypi hyperiond[437]: INFO: V4L2 grabber created and started
ssh in: Mᅢᄂr 22 18:17:07 raspberrypi hyperiond[437]: BORDER SWITCH REQUIRED!!
ssh in: Mᅢᄂr 22 18:17:07 raspberrypi hyperiond[437]: CURRENT BORDER TYPE: unknown=0 hor.size=3 vert.size=3
ssh in: Mᅢᄂr 22 18:17:07 raspberrypi hyperiond[437]: V4L2GRABBER INFO: stopped
ssh in: Mᅢᄂr 22 18:17:11 raspberrypi hyperiond[437]: V4L2GRABBER INFO: started
ssh in: Mᅢᄂr 22 18:17:11 raspberrypi hyperiond[437]: EFFECTENGINE INFO: effect finished
ssh in: Mᅢᄂr 22 18:17:15 raspberrypi hyperiond[437]: BORDER SWITCH REQUIRED!!
ssh in: Mᅢᄂr 22 18:17:15 raspberrypi hyperiond[437]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=3
ssh in: Mᅢᄂr 22 20:32:39 raspberrypi systemd[1]: Stopping Hyperion Systemd service...
ssh in: Mᅢᄂr 22 20:32:39 raspberrypi hyperiond[437]: INFO: Application closed with code 0
ssh in: Mᅢᄂr 22 20:32:39 raspberrypi hyperiond[437]: V4L2GRABBER INFO: stopped
ssh in: Mᅢᄂr 22 20:32:39 raspberrypi hyperiond[437]: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: Mᅢᄂr 22 20:32:39 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi systemd[1]: Starting Hyperion Systemd service...
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi systemd[1]: Started Hyperion Systemd service.
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: Hyperion Ambilight Deamon (1090)
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: Version : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: Build Time: Jun 3 2017 02:06:37
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: HYPERION INFO: ColorTransform 'default' => [0; 115]
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: HYPERION INFO: ColorCorrection 'default' => [0; 115]
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: HYPERION INFO: ColorAdjustment 'default' => [0; 115]
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: LEDDEVICE INFO: configuration:
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: {
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: "colorOrder" : "rgb",
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: "name" : "LG Ambilight",
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: "output" : "/dev/spidev0.0",
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: "rate" : 1000000,
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: "type" : "ws2801"
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: }
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: INFO: Creating linear smoothing
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: INFO: Hyperion started and initialised
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: BLACKBORDER INFO: threshold set to 0.2 (51)
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: BLACKBORDER INFO: mode:default
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: started
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: INFO: Json server created and started on port 19444
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: INFO: Proto server created and started on port 19445
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: V4L2GRABBER INFO: width=720 height=576
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: V4L2GRABBER INFO: pixel format=YUYV
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: BLACKBORDER INFO: threshold set to 0.2 (51)
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: BLACKBORDER INFO: mode:default
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: V4L2GRABBER INFO: signal threshold set to: {0,0,0}
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: V4L2GRABBER INFO: started
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: INFO: V4L2 grabber created and started
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: BORDER SWITCH REQUIRED!!
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=3
ssh in: Mᅢᄂr 22 20:32:40 raspberrypi hyperiond[1090]: V4L2GRABBER INFO: stopped
ssh in: Mᅢᄂr 22 20:32:45 raspberrypi hyperiond[1090]: EFFECTENGINE INFO: effect finished
ssh in: Mᅢᄂr 22 20:32:45 raspberrypi hyperiond[1090]: V4L2GRABBER INFO: started
ssh in: Mᅢᄂr 22 20:33:09 raspberrypi systemd[1]: Stopping Hyperion Systemd service...
ssh in: Mᅢᄂr 22 20:33:09 raspberrypi hyperiond[1090]: INFO: Application closed with code 0
ssh in: Mᅢᄂr 22 20:33:09 raspberrypi hyperiond[1090]: V4L2GRABBER INFO: stopped
ssh in: Mᅢᄂr 22 20:33:09 raspberrypi hyperiond[1090]: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: Mᅢᄂr 22 20:33:09 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
ssh in: Mᅢᄂr 23 00:23:18 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi systemd[1]: Starting Hyperion Systemd service...
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi systemd[1]: Started Hyperion Systemd service.
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: Hyperion Ambilight Deamon (1325)
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: Version : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: Build Time: Jun 3 2017 02:06:37
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: HYPERION INFO: ColorTransform 'default' => [0; 115]
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: HYPERION INFO: ColorCorrection 'default' => [0; 115]
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: HYPERION INFO: ColorAdjustment 'default' => [0; 115]
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: LEDDEVICE INFO: configuration:
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: {
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: "colorOrder" : "rgb",
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: "name" : "LG Ambilight",
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: "output" : "/dev/spidev0.0",
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: "rate" : 1000000,
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: "type" : "ws2801"
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: }
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: INFO: Creating linear smoothing
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: INFO: Hyperion started and initialised
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: BLACKBORDER INFO: threshold set to 0.2 (51)
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: BLACKBORDER INFO: mode:default
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: started
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: INFO: Json server created and started on port 19444
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: INFO: Proto server created and started on port 19445
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: V4L2GRABBER INFO: width=720 height=576
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: V4L2GRABBER INFO: pixel format=YUYV
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: BLACKBORDER INFO: threshold set to 0.2 (51)
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: BLACKBORDER INFO: mode:default
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: V4L2GRABBER INFO: signal threshold set to: {0,0,0}
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: V4L2GRABBER INFO: started
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: INFO: V4L2 grabber created and started
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: BORDER SWITCH REQUIRED!!
ssh in: Mᅢᄂr 23 00:23:19 raspberrypi hyperiond[1325]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=3
ssh in: Mᅢᄂr 23 00:23:20 raspberrypi hyperiond[1325]: V4L2GRABBER INFO: stopped
ssh in: Mᅢᄂr 23 00:23:24 raspberrypi hyperiond[1325]: EFFECTENGINE INFO: effect finished
ssh in: Mᅢᄂr 23 00:23:25 raspberrypi hyperiond[1325]: V4L2GRABBER INFO: started
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi systemd[1]: Stopping Hyperion Systemd service...
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1325]: INFO: Application closed with code 0
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1325]: V4L2GRABBER INFO: stopped
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1325]: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi systemd[1]: Starting Hyperion Systemd service...
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi systemd[1]: Started Hyperion Systemd service.
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: Hyperion Ambilight Deamon (1355)
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: Version : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: Build Time: Jun 3 2017 02:06:37
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: HYPERION INFO: ColorTransform 'default' => [0; 115]
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: HYPERION INFO: ColorCorrection 'default' => [0; 115]
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: HYPERION INFO: ColorAdjustment 'default' => [0; 115]
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: LEDDEVICE INFO: configuration:
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: {
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: "colorOrder" : "rgb",
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: "name" : "LG Ambilight",
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: "output" : "/dev/spidev0.0",
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: "rate" : 1000000,
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: "type" : "ws2801"
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: }
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: INFO: Creating linear smoothing
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: INFO: Hyperion started and initialised
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: BLACKBORDER INFO: threshold set to 0.2 (51)
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: BLACKBORDER INFO: mode:default
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: started
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: INFO: Json server created and started on port 19444
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: INFO: Proto server created and started on port 19445
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: V4L2GRABBER INFO: width=720 height=576
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: V4L2GRABBER INFO: pixel format=YUYV
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: BLACKBORDER INFO: threshold set to 0.2 (51)
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: BLACKBORDER INFO: mode:default
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: V4L2GRABBER INFO: signal threshold set to: {0,0,0}
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: V4L2GRABBER INFO: started
ssh in: Mᅢᄂr 23 00:23:30 raspberrypi hyperiond[1355]: INFO: V4L2 grabber created and started
ssh in: Mᅢᄂr 23 00:23:31 raspberrypi hyperiond[1355]: BORDER SWITCH REQUIRED!!
ssh in: Mᅢᄂr 23 00:23:31 raspberrypi hyperiond[1355]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=3
ssh in: Mᅢᄂr 23 00:23:31 raspberrypi hyperiond[1355]: V4L2GRABBER INFO: stopped
ssh in: Mᅢᄂr 23 00:23:36 raspberrypi hyperiond[1355]: EFFECTENGINE INFO: effect finished
ssh in: Mᅢᄂr 23 00:23:36 raspberrypi hyperiond[1355]: V4L2GRABBER INFO: started
ssh in: Mᅢᄂr 23 00:27:23 raspberrypi hyperiond[1355]: BORDER SWITCH REQUIRED!!
ssh in: Mᅢᄂr 23 00:27:23 raspberrypi hyperiond[1355]: CURRENT BORDER TYPE: unknown=0 hor.size=10 vert.size=3
ssh in: Mᅢᄂr 23 00:28:05 raspberrypi hyperiond[1355]: BORDER SWITCH REQUIRED!!
ssh in: Mᅢᄂr 23 00:28:05 raspberrypi hyperiond[1355]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=3
Was mich dabei wundert ist das hier:
ssh in: Mᅢᄂr 23 00:27:23 raspberrypi hyperiond[1355]: BORDER SWITCH REQUIRED!!
Ist das normal so?