Hallo an alle,
In den Kommentaren habe ich gelesen, das man den S-Video Anschluss als zweite Eingangsquelle nutzen kann. Das wäre für mich eine optimale Lösung, da mein Receiver über einen Scart Ausgang verfügt, welchen ich dann dort anschließen könnte und über den Chinch dann den vom Splitter.
Nun meine Frage oder eher Bitte, könnte mir jemand das Toggle Switch Script so umschreiben, das man eine zweite externe Quelle ansprechen kann (für den S-Video Eingang würde ich dann eine eigene Config Datei anlegen)
Gruß
Chris
Hyperion Toggle Switch
Hi Chris_2,
erstelle dir mal zuerst eine separate config Datei für deinen S-Video Ausgang und teste ob diese auch funktioniert.
Wenn das klappt, kann ich dir beim Toggle Script helfen.
erstelle dir mal zuerst eine separate config Datei für deinen S-Video Ausgang und teste ob diese auch funktioniert.
Wenn das klappt, kann ich dir beim Toggle Script helfen.
Hyperion Toggle Switch
Genau diese Konstellation habe ich auch. Das mit dem Abgreifen des S-Video funktioniert einwandfrei. Am Scart geben die TV immer das interne TV Signal aus, um damit Videorecorder anzusteuern. Das gilt auch für verschlüsselte Sender. Habe ich mit HD+ getestet.
Am besten nimmst du die "hyperion.config.grabber.json", kopierst sie und speicherst sie als "hyperion.config.grabberS.json" ab. Dann änderst du per Editor den Port von 0 auf 1.
Als nächstes kopierst du die "hyperion_grabber_aktivieren.sh" und benennst sie in "hyperion_grabberS_aktivieren.sh" um. Per Editor änderst du darin aufgerufene hyperion.config.... in die "hyperion.config.grabberS.json" ab.
Als letzten Schritt ergänzt du deine Favourites.xml, so wie es Aki in seiner Beispiel Favourites.xml gezeigt hat. Da bastelst du dann einfach eine 4. Zeile mit dem Start des S-Video Grabber rein.
Fertig.
Am besten nimmst du die "hyperion.config.grabber.json", kopierst sie und speicherst sie als "hyperion.config.grabberS.json" ab. Dann änderst du per Editor den Port von 0 auf 1.
Als nächstes kopierst du die "hyperion_grabber_aktivieren.sh" und benennst sie in "hyperion_grabberS_aktivieren.sh" um. Per Editor änderst du darin aufgerufene hyperion.config.... in die "hyperion.config.grabberS.json" ab.
Als letzten Schritt ergänzt du deine Favourites.xml, so wie es Aki in seiner Beispiel Favourites.xml gezeigt hat. Da bastelst du dann einfach eine 4. Zeile mit dem Start des S-Video Grabber rein.
Fertig.
Hyperion Toggle Switch
Moin Aki,
funktioniert alles bestens, mir fehlt nur noch die Komfortable Umschaltung. Habs so gemacht wie Donald beschrieben hat, vielen Dank dafür Donald
Gruß
Chris
funktioniert alles bestens, mir fehlt nur noch die Komfortable Umschaltung. Habs so gemacht wie Donald beschrieben hat, vielen Dank dafür Donald
Gruß
Chris
-
LG Ambilight
- Neuling
- Beiträge:3
- Registriert:19. Dec 2015
Hyperion Toggle Switch
Hallo,
ich bin ein wenig am verzweifeln, ich habe alles so gemacht wie oben beschrieben aber jedesmal wenn ich auf Grabber S stelle stürzt mein PI ab und ich sehe nur noch ein Regenbogen.
Wie verhält es sich eigtl. mit der Toogle switch Datei, muss man da auch eine Änderung vornehmen?
Kannst du mir evtl. deine Favourite.xml zur Verfügung stellen?
LG
ich bin ein wenig am verzweifeln, ich habe alles so gemacht wie oben beschrieben aber jedesmal wenn ich auf Grabber S stelle stürzt mein PI ab und ich sehe nur noch ein Regenbogen.
Wie verhält es sich eigtl. mit der Toogle switch Datei, muss man da auch eine Änderung vornehmen?
Kannst du mir evtl. deine Favourite.xml zur Verfügung stellen?
LG
Hyperion Toggle Switch
Bei mir funktioniert es irgendwie auch nicht richtig.
Ich habe als allererstes meine hyperion.config.grabberCINCH.json kopiert, da diese einwandfrei funktionierte. In der Kopie (hyperion.config.grabberSVHS.json) habe ich den Input von 0 zu 1 geändert.
Um das ganze zu testen, habe ich jeweils das interne TV-Signal mal per S-VHS, mal über Cinch verbunden. In beiden Fällen hat das Ambilight einwandfrei funktioniert. Ich bekam auch unter KODI jeweils bei der Auswahl eines Scriptes per Favoriten eine Bestätigung.
Also habe ich meine BD-Player per Cinch an den Grabber angeschlossen und den internen TV-Tuner per S-VHS. Beim S-VHS funktioniert alles bestens (mit Bestätigung), bei der Auswahl von Cinch scheint sich aber KODI komplett aufzuhängen. Ich bekomme auch keine Bestätigung mehr.
Eine andere Merkwürdigkeit bei mir ist, wenn ich TV per S-VHS auswähle, bekomme ich einen Rainbow-Swirl mitsamt der Bestätigung in KODI. Wähle ich KODI als Eingangssignal aus, bekomme ich die Bestätigung aber keinen Rainbow-Swirl. Finde den Swirl aber gar nicht mal so schlecht
Wie kann ich eigentlich eine Unterscheidung treffen, welchen Eingang Hyperion benutzen soll, wenn ich einen Screenshot erstellen möchte?
Hier mal meine einzelnen Scripte:
Favourites.xml
hyperion_kodi_aktivieren.sh
hyperion_grabberTV_aktivieren.sh
hyperion_grabberCINCH_aktivieren .sh
hyperion_beenden.sh
Hyperion.config.grabberCINCH.json
Hyperion.config.grabberSVHS.json
Hoffe ihr könnt mir weiterhelfen
Ich habe als allererstes meine hyperion.config.grabberCINCH.json kopiert, da diese einwandfrei funktionierte. In der Kopie (hyperion.config.grabberSVHS.json) habe ich den Input von 0 zu 1 geändert.
Um das ganze zu testen, habe ich jeweils das interne TV-Signal mal per S-VHS, mal über Cinch verbunden. In beiden Fällen hat das Ambilight einwandfrei funktioniert. Ich bekam auch unter KODI jeweils bei der Auswahl eines Scriptes per Favoriten eine Bestätigung.
Also habe ich meine BD-Player per Cinch an den Grabber angeschlossen und den internen TV-Tuner per S-VHS. Beim S-VHS funktioniert alles bestens (mit Bestätigung), bei der Auswahl von Cinch scheint sich aber KODI komplett aufzuhängen. Ich bekomme auch keine Bestätigung mehr.
Eine andere Merkwürdigkeit bei mir ist, wenn ich TV per S-VHS auswähle, bekomme ich einen Rainbow-Swirl mitsamt der Bestätigung in KODI. Wähle ich KODI als Eingangssignal aus, bekomme ich die Bestätigung aber keinen Rainbow-Swirl. Finde den Swirl aber gar nicht mal so schlecht
Wie kann ich eigentlich eine Unterscheidung treffen, welchen Eingang Hyperion benutzen soll, wenn ich einen Screenshot erstellen möchte?
Hier mal meine einzelnen Scripte:
Favourites.xml
Code: Alles auswählen
<favourites>
<favourite name="Ambilight KODI" thumb="http://powerpi.de/wp-content/uploads/powerpi/powerpi_ambi_thumb_kodi.jpg">System.Exec("/storage/.kodi/userdata/hyperion_kodi_aktivieren.sh")</favourite>
<favourite name="Ambilight TV" thumb="http://powerpi.de/wp-content/uploads/powerpi/powerpi_ambi_thumb_hdmi.jpg">System.Exec("/storage/.kodi/userdata/hyperion_grabberTV_aktivieren.sh")</favourite>
<favourite name="Ambilight EXTERN" thumb="http://powerpi.de/wp-content/uploads/powerpi/powerpi_ambi_thumb_hdmi.jpg">System.Exec("/storage/.kodi/userdata/hyperion_grabberCINCH_aktivieren.sh")</favourite>
<favourite name="Ambilight OFF" thumb="http://powerpi.de/wp-content/uploads/powerpi/powerpi_ambi_thumb_off.jpg">system.exec("/storage/.kodi/userdata/hyperion_beenden.sh")</favourite>
</favourites>hyperion_kodi_aktivieren.sh
Code: Alles auswählen
#!/bin/sh
killall hyperiond
sleep 1
kodi-send -a "Notification(Hyperion Info,Ambilight für Kodi aktiviert,7000,http://powerpi.de/wp-content/uploads/powerpi/powerpi_ambi_thumb_kodi.jpg)"
/storage/hyperion/bin/hyperiond.sh /storage/.config/hyperion.config.kodi.json
</dev/null >/dev/null 2>&1 &hyperion_grabberTV_aktivieren.sh
Code: Alles auswählen
#!/bin/sh
killall hyperiond
sleep 1
kodi-send -a "Notification(Hyperion Info,Ambilight TV,7000,http://powerpi.de/wp-content/uploads/powerpi/powerpi_ambi_thumb_hdmi.jpg)"
/storage/hyperion/bin/hyperiond.sh /storage/.config/hyperion.config.grabberSVHS.json
</dev/null >/dev/null 2>&1 &hyperion_grabberCINCH_aktivieren .sh
Code: Alles auswählen
#!/bin/sh
killall hyperiond
sleep 1
kodi-send -a "Notification(Hyperion Info,Ambilight Extern,7000,http://powerpi.de/wp-content/uploads/powerpi/powerpi_ambi_thumb_hdmi.jpg)"
/storage/hyperion/bin/hyperiond.sh /storage/.config/hyperion.config.grabberCINCH.json
</dev/null >/dev/null 2>&1 &hyperion_beenden.sh
Code: Alles auswählen
#!/bin/sh
/storage/hyperion/bin/hyperion-remote.sh --priority 50 --color black --duration 0
sleep 1
kodi-send -a "Notification(Hyperion Info,Ambilight beenden,7000,http://powerpi.de/wp-content/uploads/powerpi/powerpi_ambi_thumb_off.jpg)"
</dev/null >/dev/null 2>&1 &Hyperion.config.grabberCINCH.json
Code: Alles auswählen
...
"grabber-v4l2" :
{
"device" : "/dev/video0",
"input" : 0,
"standard" : "PAL",
"width" : 720, (Statt -1)
"height" : 576, (Statt -1)
"frameDecimation" : 0,
"sizeDecimation" : 8,
"priority" : 1100,
"mode" : "2D",
"cropLeft" : 20,
"cropRight" : 22,
"cropTop" : 12,
"cropBottom" : 2,
"redSignalThreshold" : 0.1,
"greenSignalThreshold" : 0.1,
"blueSignalThreshold" : 0.1
},
...Hyperion.config.grabberSVHS.json
Code: Alles auswählen
...
"grabber-v4l2" :
{
"device" : "/dev/video0",
"input" : 1,
"standard" : "PAL",
"width" : 720, (Statt -1)
"height" : 576, (Statt -1)
"frameDecimation" : 0,
"sizeDecimation" : 8,
"priority" : 1100,
"mode" : "2D",
"cropLeft" : 20,
"cropRight" : 22,
"cropTop" : 12,
"cropBottom" : 2,
"redSignalThreshold" : 0.1,
"greenSignalThreshold" : 0.1,
"blueSignalThreshold" : 0.1
},
...Hoffe ihr könnt mir weiterhelfen
Hyperion Toggle Switch
poste mal bitte die vollständigen hyperion.config.*.json damit man die mal durch nen json validator schicken kann, klingt nach nem syntax error.
Beim Screenshot machen einfach "--input 1" anhängen (für SVIDEO)
Beim Screenshot machen einfach "--input 1" anhängen (für SVIDEO)
root@osmc:~# hyperion-v4l2 --help
V4L capture application for Hyperion
Build time: Feb 10 2016 00:58:27
Usage: hyperion-v4l2 [OPTIONS]
Parameters:
-d, --device <arg> The device to use [default=/dev/video0]
-v, --video-standard <arg> The used video standard. Valid values are PAL or NTSC (optional)
--pixel-format <arg> The use pixel format. Valid values are YUYV, UYVY, and RGB32 (optional)
--input <arg> Input channel (optional)
--width <arg> Try to set the width of the video input (optional)
--height <arg> Try to set the height of the video input (optional)
--crop-width <arg> Number of pixels to crop from the left and right sides of the picture before decimation [default=0]
--crop-height <arg> Number of pixels to crop from the top and the bottom of the picture before decimation [default=0]
--crop-left <arg> Number of pixels to crop from the left of the picture before decimation (overrides --crop-width)
--crop-right <arg> Number of pixels to crop from the right of the picture before decimation (overrides --crop-width)
--crop-top <arg> Number of pixels to crop from the top of the picture before decimation (overrides --crop-height)
--crop-bottom <arg> Number of pixels to crop from the bottom of the picture before decimation (overrides --crop-height)
-s, --size-decimator <arg> Decimation factor for the output size [default=1]
-f, --frame-decimator <arg> Decimation factor for the video frames [default=1]
--screenshot Take a single screenshot, save it to file and quit
-t, --signal-threshold <arg> The signal threshold for detecting the presence of a signal. Value should be between 0.0 and 1.0.
--red-threshold <arg> The red signal threshold. Value should be between 0.0 and 1.0. (overrides --signal-threshold)
--green-threshold <arg> The green signal threshold. Value should be between 0.0 and 1.0. (overrides --signal-threshold)
--blue-threshold <arg> The blue signal threshold. Value should be between 0.0 and 1.0. (overrides --signal-threshold)
--3DSBS Interpret the incoming video stream as 3D side-by-side
--3DTAB Interpret the incoming video stream as 3D top-and-bottom
-a, --address <arg> Set the address of the hyperion server [default: 127.0.0.1:19445]
-p, --priority <arg> Use the provided priority channel (the lower the number, the higher the priority) [default: 800]
--skip-reply Do not receive and check reply messages from Hyperion
-h, --help Show this help message and exit
Kein Support per PM!
Hyperion Toggle Switch
Okay,
mache ich, wenn ich wieder zu Hause bin
Werde dann auch mal schauen, was der Screenshot raushaut.
mache ich, wenn ich wieder zu Hause bin
Werde dann auch mal schauen, was der Screenshot raushaut.
Hyperion Toggle Switch
Hier mal meine "hyperion.config.grabberCINCH.json"
Und hier der Sceenshot:
Code: Alles auswählen
// Automatically generated configuration file for 'Hyperion daemon'
// Generated by: HyperCon (The Hyperion deamon configuration file builder
{
/// Device configuration contains the following fields:
/// * 'name' : The user friendly name of the device (only used for display purposes)
/// * 'type' : The type of the device or leds (known types for now are 'ws2801', 'ldp8806',
/// 'lpd6803', 'sedu', 'adalight', 'lightpack', 'test' and 'none')
/// * 'output' : The output specification depends on selected device. This can for example be the
/// device specifier, device serial number, or the output file name
/// * 'rate' : The baudrate of the output to the device
/// * 'colorOrder' : The order of the color bytes ('rgb', 'rbg', 'bgr', etc.).
"device" :
{
"name" : "MyPi",
"type" : "ws2801",
"output" : "/dev/spidev0.0",
"rate" : 250000,
"colorOrder" : "rbg"
},
/// Color manipulation configuration used to tune the output colors to specific surroundings.
/// The configuration contains a list of color-transforms. Each transform contains the
/// following fields:
/// * 'id' : The unique identifier of the color transformation (eg 'device_1') /// * 'leds' : The indices (or index ranges) of the leds to which this color transform applies
/// (eg '0-5, 9, 11, 12-17'). The indices are zero based. /// * 'hsv' : The manipulation in the Hue-Saturation-Value color domain with the following
/// tuning parameters:
/// - 'saturationGain' The gain adjustement of the saturation
/// - 'valueGain' The gain adjustement of the value
/// * 'red'/'green'/'blue' : The manipulation in the Red-Green-Blue color domain with the
/// following tuning parameters for each channel:
/// - 'threshold' The minimum required input value for the channel to be on
/// (else zero)
/// - 'gamma' The gamma-curve correction factor
/// - 'blacklevel' The lowest possible value (when the channel is black)
/// - 'whitelevel' The highest possible value (when the channel is white)
///
/// Next to the list with color transforms there is also a smoothing option.
/// * 'smoothing' : Smoothing of the colors in the time-domain with the following tuning
/// parameters:
/// - 'type' The type of smoothing algorithm ('linear' or 'none')
/// - 'time_ms' The time constant for smoothing algorithm in milliseconds
/// - 'updateFrequency' The update frequency of the leds in Hz
"color" :
{
"transform" :
[
{
"id" : "default",
"leds" : "*",
"hsv" :
{
"saturationGain" : 1.0000,
"valueGain" : 0.8900
},
"red" :
{
"threshold" : 0.1900,
"gamma" : 2.0000,
"blacklevel" : 0.0000,
"whitelevel" : 1.0000
},
"green" :
{
"threshold" : 0.1900,
"gamma" : 2.0000,
"blacklevel" : 0.0000,
"whitelevel" : 0.4000
},
"blue" :
{
"threshold" : 0.1900,
"gamma" : 2.0000,
"blacklevel" : 0.0000,
"whitelevel" : 0.2700
}
}
],
"smoothing" :
{
"type" : "linear",
"time_ms" : 200,
"updateFrequency" : 25.0000
}
},
/// The configuration for each individual led. This contains the specification of the area
/// averaged of an input image for each led to determine its color. Each item in the list
/// contains the following fields:
/// * index: The index of the led. This determines its location in the string of leds; zero
/// being the first led.
/// * hscan: The fractional part of the image along the horizontal used for the averaging
/// (minimum and maximum inclusive)
/// * vscan: The fractional part of the image along the vertical used for the averaging
/// (minimum and maximum inclusive)
"leds" :
[
{
"index" : 0,
"hscan" : { "minimum" : 0.5957, "maximum" : 0.6170 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 1,
"hscan" : { "minimum" : 0.6170, "maximum" : 0.6383 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 2,
"hscan" : { "minimum" : 0.6383, "maximum" : 0.6596 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 3,
"hscan" : { "minimum" : 0.6596, "maximum" : 0.6809 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 4,
"hscan" : { "minimum" : 0.6809, "maximum" : 0.7021 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 5,
"hscan" : { "minimum" : 0.7021, "maximum" : 0.7234 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 6,
"hscan" : { "minimum" : 0.7234, "maximum" : 0.7447 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 7,
"hscan" : { "minimum" : 0.7447, "maximum" : 0.7660 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 8,
"hscan" : { "minimum" : 0.7660, "maximum" : 0.7872 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 9,
"hscan" : { "minimum" : 0.7872, "maximum" : 0.8085 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 10,
"hscan" : { "minimum" : 0.8085, "maximum" : 0.8298 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 11,
"hscan" : { "minimum" : 0.8298, "maximum" : 0.8511 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 12,
"hscan" : { "minimum" : 0.8511, "maximum" : 0.8723 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 13,
"hscan" : { "minimum" : 0.8723, "maximum" : 0.8936 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 14,
"hscan" : { "minimum" : 0.8936, "maximum" : 0.9149 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 15,
"hscan" : { "minimum" : 0.9149, "maximum" : 0.9362 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 16,
"hscan" : { "minimum" : 0.9362, "maximum" : 0.9574 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 17,
"hscan" : { "minimum" : 0.9574, "maximum" : 0.9787 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 18,
"hscan" : { "minimum" : 0.9787, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 19,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.9615, "maximum" : 1.0000 }
},
{
"index" : 20,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.9231, "maximum" : 0.9615 }
},
{
"index" : 21,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.8846, "maximum" : 0.9231 }
},
{
"index" : 22,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.8462, "maximum" : 0.8846 }
},
{
"index" : 23,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.8077, "maximum" : 0.8462 }
},
{
"index" : 24,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.7692, "maximum" : 0.8077 }
},
{
"index" : 25,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.7308, "maximum" : 0.7692 }
},
{
"index" : 26,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.6923, "maximum" : 0.7308 }
},
{
"index" : 27,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.6538, "maximum" : 0.6923 }
},
{
"index" : 28,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.6154, "maximum" : 0.6538 }
},
{
"index" : 29,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.5769, "maximum" : 0.6154 }
},
{
"index" : 30,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.5385, "maximum" : 0.5769 }
},
{
"index" : 31,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.5000, "maximum" : 0.5385 }
},
{
"index" : 32,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.4615, "maximum" : 0.5000 }
},
{
"index" : 33,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.4231, "maximum" : 0.4615 }
},
{
"index" : 34,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.3846, "maximum" : 0.4231 }
},
{
"index" : 35,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.3462, "maximum" : 0.3846 }
},
{
"index" : 36,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.3077, "maximum" : 0.3462 }
},
{
"index" : 37,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.2692, "maximum" : 0.3077 }
},
{
"index" : 38,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.2308, "maximum" : 0.2692 }
},
{
"index" : 39,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.1923, "maximum" : 0.2308 }
},
{
"index" : 40,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.1538, "maximum" : 0.1923 }
},
{
"index" : 41,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.1154, "maximum" : 0.1538 }
},
{
"index" : 42,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0769, "maximum" : 0.1154 }
},
{
"index" : 43,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0385, "maximum" : 0.0769 }
},
{
"index" : 44,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0385 }
},
{
"index" : 45,
"hscan" : { "minimum" : 0.9787, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 46,
"hscan" : { "minimum" : 0.9574, "maximum" : 0.9787 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 47,
"hscan" : { "minimum" : 0.9362, "maximum" : 0.9574 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 48,
"hscan" : { "minimum" : 0.9149, "maximum" : 0.9362 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 49,
"hscan" : { "minimum" : 0.8936, "maximum" : 0.9149 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 50,
"hscan" : { "minimum" : 0.8723, "maximum" : 0.8936 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 51,
"hscan" : { "minimum" : 0.8511, "maximum" : 0.8723 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 52,
"hscan" : { "minimum" : 0.8298, "maximum" : 0.8511 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 53,
"hscan" : { "minimum" : 0.8085, "maximum" : 0.8298 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 54,
"hscan" : { "minimum" : 0.7872, "maximum" : 0.8085 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 55,
"hscan" : { "minimum" : 0.7660, "maximum" : 0.7872 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 56,
"hscan" : { "minimum" : 0.7447, "maximum" : 0.7660 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 57,
"hscan" : { "minimum" : 0.7234, "maximum" : 0.7447 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 58,
"hscan" : { "minimum" : 0.7021, "maximum" : 0.7234 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 59,
"hscan" : { "minimum" : 0.6809, "maximum" : 0.7021 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 60,
"hscan" : { "minimum" : 0.6596, "maximum" : 0.6809 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 61,
"hscan" : { "minimum" : 0.6383, "maximum" : 0.6596 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 62,
"hscan" : { "minimum" : 0.6170, "maximum" : 0.6383 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 63,
"hscan" : { "minimum" : 0.5957, "maximum" : 0.6170 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 64,
"hscan" : { "minimum" : 0.5745, "maximum" : 0.5957 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 65,
"hscan" : { "minimum" : 0.5532, "maximum" : 0.5745 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 66,
"hscan" : { "minimum" : 0.5319, "maximum" : 0.5532 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 67,
"hscan" : { "minimum" : 0.5106, "maximum" : 0.5319 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 68,
"hscan" : { "minimum" : 0.4894, "maximum" : 0.5106 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 69,
"hscan" : { "minimum" : 0.4681, "maximum" : 0.4894 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 70,
"hscan" : { "minimum" : 0.4468, "maximum" : 0.4681 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 71,
"hscan" : { "minimum" : 0.4255, "maximum" : 0.4468 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 72,
"hscan" : { "minimum" : 0.4043, "maximum" : 0.4255 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 73,
"hscan" : { "minimum" : 0.3830, "maximum" : 0.4043 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 74,
"hscan" : { "minimum" : 0.3617, "maximum" : 0.3830 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 75,
"hscan" : { "minimum" : 0.3404, "maximum" : 0.3617 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 76,
"hscan" : { "minimum" : 0.3191, "maximum" : 0.3404 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 77,
"hscan" : { "minimum" : 0.2979, "maximum" : 0.3191 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 78,
"hscan" : { "minimum" : 0.2766, "maximum" : 0.2979 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 79,
"hscan" : { "minimum" : 0.2553, "maximum" : 0.2766 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 80,
"hscan" : { "minimum" : 0.2340, "maximum" : 0.2553 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 81,
"hscan" : { "minimum" : 0.2128, "maximum" : 0.2340 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 82,
"hscan" : { "minimum" : 0.1915, "maximum" : 0.2128 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 83,
"hscan" : { "minimum" : 0.1702, "maximum" : 0.1915 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 84,
"hscan" : { "minimum" : 0.1489, "maximum" : 0.1702 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 85,
"hscan" : { "minimum" : 0.1277, "maximum" : 0.1489 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 86,
"hscan" : { "minimum" : 0.1064, "maximum" : 0.1277 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 87,
"hscan" : { "minimum" : 0.0851, "maximum" : 0.1064 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 88,
"hscan" : { "minimum" : 0.0638, "maximum" : 0.0851 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 89,
"hscan" : { "minimum" : 0.0426, "maximum" : 0.0638 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 90,
"hscan" : { "minimum" : 0.0213, "maximum" : 0.0426 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 91,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0213 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 92,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0385 }
},
{
"index" : 93,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.0385, "maximum" : 0.0769 }
},
{
"index" : 94,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.0769, "maximum" : 0.1154 }
},
{
"index" : 95,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.1154, "maximum" : 0.1538 }
},
{
"index" : 96,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.1538, "maximum" : 0.1923 }
},
{
"index" : 97,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.1923, "maximum" : 0.2308 }
},
{
"index" : 98,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.2308, "maximum" : 0.2692 }
},
{
"index" : 99,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.2692, "maximum" : 0.3077 }
},
{
"index" : 100,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.3077, "maximum" : 0.3462 }
},
{
"index" : 101,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.3462, "maximum" : 0.3846 }
},
{
"index" : 102,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.3846, "maximum" : 0.4231 }
},
{
"index" : 103,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.4231, "maximum" : 0.4615 }
},
{
"index" : 104,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.4615, "maximum" : 0.5000 }
},
{
"index" : 105,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.5000, "maximum" : 0.5385 }
},
{
"index" : 106,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.5385, "maximum" : 0.5769 }
},
{
"index" : 107,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.5769, "maximum" : 0.6154 }
},
{
"index" : 108,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.6154, "maximum" : 0.6538 }
},
{
"index" : 109,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.6538, "maximum" : 0.6923 }
},
{
"index" : 110,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.6923, "maximum" : 0.7308 }
},
{
"index" : 111,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.7308, "maximum" : 0.7692 }
},
{
"index" : 112,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.7692, "maximum" : 0.8077 }
},
{
"index" : 113,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.8077, "maximum" : 0.8462 }
},
{
"index" : 114,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.8462, "maximum" : 0.8846 }
},
{
"index" : 115,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.8846, "maximum" : 0.9231 }
},
{
"index" : 116,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.9231, "maximum" : 0.9615 }
},
{
"index" : 117,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.9615, "maximum" : 1.0000 }
},
{
"index" : 118,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0213 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 119,
"hscan" : { "minimum" : 0.0213, "maximum" : 0.0426 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 120,
"hscan" : { "minimum" : 0.0426, "maximum" : 0.0638 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 121,
"hscan" : { "minimum" : 0.0638, "maximum" : 0.0851 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 122,
"hscan" : { "minimum" : 0.0851, "maximum" : 0.1064 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 123,
"hscan" : { "minimum" : 0.1064, "maximum" : 0.1277 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 124,
"hscan" : { "minimum" : 0.1277, "maximum" : 0.1489 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 125,
"hscan" : { "minimum" : 0.1489, "maximum" : 0.1702 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 126,
"hscan" : { "minimum" : 0.1702, "maximum" : 0.1915 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 127,
"hscan" : { "minimum" : 0.1915, "maximum" : 0.2128 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 128,
"hscan" : { "minimum" : 0.2128, "maximum" : 0.2340 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 129,
"hscan" : { "minimum" : 0.2340, "maximum" : 0.2553 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 130,
"hscan" : { "minimum" : 0.2553, "maximum" : 0.2766 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 131,
"hscan" : { "minimum" : 0.2766, "maximum" : 0.2979 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 132,
"hscan" : { "minimum" : 0.2979, "maximum" : 0.3191 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 133,
"hscan" : { "minimum" : 0.3191, "maximum" : 0.3404 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 134,
"hscan" : { "minimum" : 0.3404, "maximum" : 0.3617 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 135,
"hscan" : { "minimum" : 0.3617, "maximum" : 0.3830 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 136,
"hscan" : { "minimum" : 0.3830, "maximum" : 0.4043 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
}
],
/// The black border configuration, contains the following items:
/// * enable : true if the detector should be activated
/// * threshold : Value below which a pixel is regarded as black (value between 0.0 and 1.0)
"blackborderdetector" :
{
"enable" : true,
"threshold" : 0.14
},
/// The configuration of the effect engine, contains the following items:
/// * paths : An array with absolute location(s) of directories with effects
/// * bootsequence : The effect selected as 'boot sequence'
"effects" :
{
"paths" :
[
"/storage/hyperion/effects"
]
},
"bootsequence" :
{
"effect" : "Rainbow swirl fast",
"duration_ms" : 3000
},
/// The configuration for the frame-grabber, contains the following items:
/// * width : The width of the grabbed frames [pixels]
/// * height : The height of the grabbed frames [pixels]
/// * frequency_Hz : The frequency of the frame grab [Hz]
"grabber-v4l2" :
{
"device" : "/dev/video0",
"input" : 0,
"standard" : "PAL",
"width" : 720,
"height" : 576,
"frameDecimation" : 0,
"sizeDecimation" : 8,
"priority" : 1100,
"mode" : "2D",
"cropLeft" : 20,
"cropRight" : 22,
"cropTop" : 12,
"cropBottom" : 2,
"redSignalThreshold" : 0.1,
"greenSignalThreshold" : 0.1,
"blueSignalThreshold" : 0.1
},
/// The configuration of the XBMC connection used to enable and disable the frame-grabber. Contains the following fields:
/// * xbmcAddress : The IP address of the XBMC-host
/// * xbmcTcpPort : The TCP-port of the XBMC-server
/// * grabVideo : Flag indicating that the frame-grabber is on(true) during video playback
/// * grabPictures : Flag indicating that the frame-grabber is on(true) during picture show
/// * grabAudio : Flag indicating that the frame-grabber is on(true) during audio playback
/// * grabMenu : Flag indicating that the frame-grabber is on(true) in the XBMC menu
/// * grabScreensaver : Flag indicating that the frame-grabber is on(true) when XBMC is on screensaver
/// * enable3DDetection : Flag indicating that the frame-grabber should switch to a 3D compatible modus if a 3D video is playing
// "xbmcVideoChecker" :
// {
// "xbmcAddress" : "127.0.0.1",
// "xbmcTcpPort" : 9090,
// "grabVideo" : true,
// "grabPictures" : true,
// "grabAudio" : true,
// "grabMenu" : true,
// "grabScreensaver" : true,
// "enable3DDetection" : true
// },
/// The configuration of the Json server which enables the json remote interface
/// * port : Port at which the json server is started
"jsonServer" :
{
"port" : 19444
},
/// The configuration of the Proto server which enables the protobuffer remote interface
/// * port : Port at which the protobuffer server is started
"protoServer" :
{
"port" : 19445
},
/// The configuration of the boblight server which enables the boblight remote interface
/// * port : Port at which the boblight server is started
// "boblightServer" :
// {
// "port" : 19333
// },
"endOfJson" : "endOfJson"
}
Und hier der Sceenshot:
- screenshotCINCH.png (150.63 KiB) 8688 mal betrachtet
Zuletzt geändert von Allodo am 7. Apr 2016, 16:59, insgesamt 1-mal geändert.
Hyperion Toggle Switch
Und hier die "hyperion.config.grabberSVHS.json"
Und der Screenshot:
Code: Alles auswählen
// Automatically generated configuration file for 'Hyperion daemon'
// Generated by: HyperCon (The Hyperion deamon configuration file builder
{
/// Device configuration contains the following fields:
/// * 'name' : The user friendly name of the device (only used for display purposes)
/// * 'type' : The type of the device or leds (known types for now are 'ws2801', 'ldp8806',
/// 'lpd6803', 'sedu', 'adalight', 'lightpack', 'test' and 'none')
/// * 'output' : The output specification depends on selected device. This can for example be the
/// device specifier, device serial number, or the output file name
/// * 'rate' : The baudrate of the output to the device
/// * 'colorOrder' : The order of the color bytes ('rgb', 'rbg', 'bgr', etc.).
"device" :
{
"name" : "MyPi",
"type" : "ws2801",
"output" : "/dev/spidev0.0",
"rate" : 250000,
"colorOrder" : "rbg"
},
/// Color manipulation configuration used to tune the output colors to specific surroundings.
/// The configuration contains a list of color-transforms. Each transform contains the
/// following fields:
/// * 'id' : The unique identifier of the color transformation (eg 'device_1') /// * 'leds' : The indices (or index ranges) of the leds to which this color transform applies
/// (eg '0-5, 9, 11, 12-17'). The indices are zero based. /// * 'hsv' : The manipulation in the Hue-Saturation-Value color domain with the following
/// tuning parameters:
/// - 'saturationGain' The gain adjustement of the saturation
/// - 'valueGain' The gain adjustement of the value
/// * 'red'/'green'/'blue' : The manipulation in the Red-Green-Blue color domain with the
/// following tuning parameters for each channel:
/// - 'threshold' The minimum required input value for the channel to be on
/// (else zero)
/// - 'gamma' The gamma-curve correction factor
/// - 'blacklevel' The lowest possible value (when the channel is black)
/// - 'whitelevel' The highest possible value (when the channel is white)
///
/// Next to the list with color transforms there is also a smoothing option.
/// * 'smoothing' : Smoothing of the colors in the time-domain with the following tuning
/// parameters:
/// - 'type' The type of smoothing algorithm ('linear' or 'none')
/// - 'time_ms' The time constant for smoothing algorithm in milliseconds
/// - 'updateFrequency' The update frequency of the leds in Hz
"color" :
{
"transform" :
[
{
"id" : "default",
"leds" : "*",
"hsv" :
{
"saturationGain" : 1.0000,
"valueGain" : 0.8900
},
"red" :
{
"threshold" : 0.1900,
"gamma" : 2.0000,
"blacklevel" : 0.0000,
"whitelevel" : 1.0000
},
"green" :
{
"threshold" : 0.1900,
"gamma" : 2.0000,
"blacklevel" : 0.0000,
"whitelevel" : 0.4000
},
"blue" :
{
"threshold" : 0.1900,
"gamma" : 2.0000,
"blacklevel" : 0.0000,
"whitelevel" : 0.2700
}
}
],
"smoothing" :
{
"type" : "linear",
"time_ms" : 200,
"updateFrequency" : 25.0000
}
},
/// The configuration for each individual led. This contains the specification of the area
/// averaged of an input image for each led to determine its color. Each item in the list
/// contains the following fields:
/// * index: The index of the led. This determines its location in the string of leds; zero
/// being the first led.
/// * hscan: The fractional part of the image along the horizontal used for the averaging
/// (minimum and maximum inclusive)
/// * vscan: The fractional part of the image along the vertical used for the averaging
/// (minimum and maximum inclusive)
"leds" :
[
{
"index" : 0,
"hscan" : { "minimum" : 0.5957, "maximum" : 0.6170 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 1,
"hscan" : { "minimum" : 0.6170, "maximum" : 0.6383 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 2,
"hscan" : { "minimum" : 0.6383, "maximum" : 0.6596 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 3,
"hscan" : { "minimum" : 0.6596, "maximum" : 0.6809 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 4,
"hscan" : { "minimum" : 0.6809, "maximum" : 0.7021 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 5,
"hscan" : { "minimum" : 0.7021, "maximum" : 0.7234 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 6,
"hscan" : { "minimum" : 0.7234, "maximum" : 0.7447 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 7,
"hscan" : { "minimum" : 0.7447, "maximum" : 0.7660 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 8,
"hscan" : { "minimum" : 0.7660, "maximum" : 0.7872 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 9,
"hscan" : { "minimum" : 0.7872, "maximum" : 0.8085 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 10,
"hscan" : { "minimum" : 0.8085, "maximum" : 0.8298 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 11,
"hscan" : { "minimum" : 0.8298, "maximum" : 0.8511 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 12,
"hscan" : { "minimum" : 0.8511, "maximum" : 0.8723 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 13,
"hscan" : { "minimum" : 0.8723, "maximum" : 0.8936 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 14,
"hscan" : { "minimum" : 0.8936, "maximum" : 0.9149 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 15,
"hscan" : { "minimum" : 0.9149, "maximum" : 0.9362 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 16,
"hscan" : { "minimum" : 0.9362, "maximum" : 0.9574 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 17,
"hscan" : { "minimum" : 0.9574, "maximum" : 0.9787 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 18,
"hscan" : { "minimum" : 0.9787, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 19,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.9615, "maximum" : 1.0000 }
},
{
"index" : 20,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.9231, "maximum" : 0.9615 }
},
{
"index" : 21,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.8846, "maximum" : 0.9231 }
},
{
"index" : 22,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.8462, "maximum" : 0.8846 }
},
{
"index" : 23,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.8077, "maximum" : 0.8462 }
},
{
"index" : 24,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.7692, "maximum" : 0.8077 }
},
{
"index" : 25,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.7308, "maximum" : 0.7692 }
},
{
"index" : 26,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.6923, "maximum" : 0.7308 }
},
{
"index" : 27,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.6538, "maximum" : 0.6923 }
},
{
"index" : 28,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.6154, "maximum" : 0.6538 }
},
{
"index" : 29,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.5769, "maximum" : 0.6154 }
},
{
"index" : 30,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.5385, "maximum" : 0.5769 }
},
{
"index" : 31,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.5000, "maximum" : 0.5385 }
},
{
"index" : 32,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.4615, "maximum" : 0.5000 }
},
{
"index" : 33,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.4231, "maximum" : 0.4615 }
},
{
"index" : 34,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.3846, "maximum" : 0.4231 }
},
{
"index" : 35,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.3462, "maximum" : 0.3846 }
},
{
"index" : 36,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.3077, "maximum" : 0.3462 }
},
{
"index" : 37,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.2692, "maximum" : 0.3077 }
},
{
"index" : 38,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.2308, "maximum" : 0.2692 }
},
{
"index" : 39,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.1923, "maximum" : 0.2308 }
},
{
"index" : 40,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.1538, "maximum" : 0.1923 }
},
{
"index" : 41,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.1154, "maximum" : 0.1538 }
},
{
"index" : 42,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0769, "maximum" : 0.1154 }
},
{
"index" : 43,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0385, "maximum" : 0.0769 }
},
{
"index" : 44,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0385 }
},
{
"index" : 45,
"hscan" : { "minimum" : 0.9787, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 46,
"hscan" : { "minimum" : 0.9574, "maximum" : 0.9787 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 47,
"hscan" : { "minimum" : 0.9362, "maximum" : 0.9574 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 48,
"hscan" : { "minimum" : 0.9149, "maximum" : 0.9362 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 49,
"hscan" : { "minimum" : 0.8936, "maximum" : 0.9149 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 50,
"hscan" : { "minimum" : 0.8723, "maximum" : 0.8936 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 51,
"hscan" : { "minimum" : 0.8511, "maximum" : 0.8723 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 52,
"hscan" : { "minimum" : 0.8298, "maximum" : 0.8511 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 53,
"hscan" : { "minimum" : 0.8085, "maximum" : 0.8298 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 54,
"hscan" : { "minimum" : 0.7872, "maximum" : 0.8085 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 55,
"hscan" : { "minimum" : 0.7660, "maximum" : 0.7872 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 56,
"hscan" : { "minimum" : 0.7447, "maximum" : 0.7660 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 57,
"hscan" : { "minimum" : 0.7234, "maximum" : 0.7447 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 58,
"hscan" : { "minimum" : 0.7021, "maximum" : 0.7234 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 59,
"hscan" : { "minimum" : 0.6809, "maximum" : 0.7021 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 60,
"hscan" : { "minimum" : 0.6596, "maximum" : 0.6809 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 61,
"hscan" : { "minimum" : 0.6383, "maximum" : 0.6596 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 62,
"hscan" : { "minimum" : 0.6170, "maximum" : 0.6383 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 63,
"hscan" : { "minimum" : 0.5957, "maximum" : 0.6170 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 64,
"hscan" : { "minimum" : 0.5745, "maximum" : 0.5957 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 65,
"hscan" : { "minimum" : 0.5532, "maximum" : 0.5745 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 66,
"hscan" : { "minimum" : 0.5319, "maximum" : 0.5532 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 67,
"hscan" : { "minimum" : 0.5106, "maximum" : 0.5319 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 68,
"hscan" : { "minimum" : 0.4894, "maximum" : 0.5106 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 69,
"hscan" : { "minimum" : 0.4681, "maximum" : 0.4894 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 70,
"hscan" : { "minimum" : 0.4468, "maximum" : 0.4681 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 71,
"hscan" : { "minimum" : 0.4255, "maximum" : 0.4468 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 72,
"hscan" : { "minimum" : 0.4043, "maximum" : 0.4255 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 73,
"hscan" : { "minimum" : 0.3830, "maximum" : 0.4043 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 74,
"hscan" : { "minimum" : 0.3617, "maximum" : 0.3830 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 75,
"hscan" : { "minimum" : 0.3404, "maximum" : 0.3617 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 76,
"hscan" : { "minimum" : 0.3191, "maximum" : 0.3404 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 77,
"hscan" : { "minimum" : 0.2979, "maximum" : 0.3191 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 78,
"hscan" : { "minimum" : 0.2766, "maximum" : 0.2979 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 79,
"hscan" : { "minimum" : 0.2553, "maximum" : 0.2766 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 80,
"hscan" : { "minimum" : 0.2340, "maximum" : 0.2553 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 81,
"hscan" : { "minimum" : 0.2128, "maximum" : 0.2340 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 82,
"hscan" : { "minimum" : 0.1915, "maximum" : 0.2128 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 83,
"hscan" : { "minimum" : 0.1702, "maximum" : 0.1915 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 84,
"hscan" : { "minimum" : 0.1489, "maximum" : 0.1702 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 85,
"hscan" : { "minimum" : 0.1277, "maximum" : 0.1489 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 86,
"hscan" : { "minimum" : 0.1064, "maximum" : 0.1277 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 87,
"hscan" : { "minimum" : 0.0851, "maximum" : 0.1064 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 88,
"hscan" : { "minimum" : 0.0638, "maximum" : 0.0851 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 89,
"hscan" : { "minimum" : 0.0426, "maximum" : 0.0638 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 90,
"hscan" : { "minimum" : 0.0213, "maximum" : 0.0426 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 91,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0213 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 92,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0385 }
},
{
"index" : 93,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.0385, "maximum" : 0.0769 }
},
{
"index" : 94,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.0769, "maximum" : 0.1154 }
},
{
"index" : 95,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.1154, "maximum" : 0.1538 }
},
{
"index" : 96,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.1538, "maximum" : 0.1923 }
},
{
"index" : 97,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.1923, "maximum" : 0.2308 }
},
{
"index" : 98,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.2308, "maximum" : 0.2692 }
},
{
"index" : 99,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.2692, "maximum" : 0.3077 }
},
{
"index" : 100,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.3077, "maximum" : 0.3462 }
},
{
"index" : 101,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.3462, "maximum" : 0.3846 }
},
{
"index" : 102,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.3846, "maximum" : 0.4231 }
},
{
"index" : 103,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.4231, "maximum" : 0.4615 }
},
{
"index" : 104,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.4615, "maximum" : 0.5000 }
},
{
"index" : 105,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.5000, "maximum" : 0.5385 }
},
{
"index" : 106,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.5385, "maximum" : 0.5769 }
},
{
"index" : 107,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.5769, "maximum" : 0.6154 }
},
{
"index" : 108,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.6154, "maximum" : 0.6538 }
},
{
"index" : 109,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.6538, "maximum" : 0.6923 }
},
{
"index" : 110,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.6923, "maximum" : 0.7308 }
},
{
"index" : 111,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.7308, "maximum" : 0.7692 }
},
{
"index" : 112,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.7692, "maximum" : 0.8077 }
},
{
"index" : 113,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.8077, "maximum" : 0.8462 }
},
{
"index" : 114,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.8462, "maximum" : 0.8846 }
},
{
"index" : 115,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.8846, "maximum" : 0.9231 }
},
{
"index" : 116,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.9231, "maximum" : 0.9615 }
},
{
"index" : 117,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.9615, "maximum" : 1.0000 }
},
{
"index" : 118,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0213 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 119,
"hscan" : { "minimum" : 0.0213, "maximum" : 0.0426 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 120,
"hscan" : { "minimum" : 0.0426, "maximum" : 0.0638 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 121,
"hscan" : { "minimum" : 0.0638, "maximum" : 0.0851 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 122,
"hscan" : { "minimum" : 0.0851, "maximum" : 0.1064 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 123,
"hscan" : { "minimum" : 0.1064, "maximum" : 0.1277 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 124,
"hscan" : { "minimum" : 0.1277, "maximum" : 0.1489 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 125,
"hscan" : { "minimum" : 0.1489, "maximum" : 0.1702 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 126,
"hscan" : { "minimum" : 0.1702, "maximum" : 0.1915 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 127,
"hscan" : { "minimum" : 0.1915, "maximum" : 0.2128 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 128,
"hscan" : { "minimum" : 0.2128, "maximum" : 0.2340 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 129,
"hscan" : { "minimum" : 0.2340, "maximum" : 0.2553 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 130,
"hscan" : { "minimum" : 0.2553, "maximum" : 0.2766 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 131,
"hscan" : { "minimum" : 0.2766, "maximum" : 0.2979 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 132,
"hscan" : { "minimum" : 0.2979, "maximum" : 0.3191 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 133,
"hscan" : { "minimum" : 0.3191, "maximum" : 0.3404 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 134,
"hscan" : { "minimum" : 0.3404, "maximum" : 0.3617 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 135,
"hscan" : { "minimum" : 0.3617, "maximum" : 0.3830 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 136,
"hscan" : { "minimum" : 0.3830, "maximum" : 0.4043 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
}
],
/// The black border configuration, contains the following items:
/// * enable : true if the detector should be activated
/// * threshold : Value below which a pixel is regarded as black (value between 0.0 and 1.0)
"blackborderdetector" :
{
"enable" : true,
"threshold" : 0.14
},
/// The configuration of the effect engine, contains the following items:
/// * paths : An array with absolute location(s) of directories with effects
/// * bootsequence : The effect selected as 'boot sequence'
"effects" :
{
"paths" :
[
"/storage/hyperion/effects"
]
},
"bootsequence" :
{
"effect" : "Rainbow swirl fast",
"duration_ms" : 3000
},
/// The configuration for the frame-grabber, contains the following items:
/// * width : The width of the grabbed frames [pixels]
/// * height : The height of the grabbed frames [pixels]
/// * frequency_Hz : The frequency of the frame grab [Hz]
"grabber-v4l2" :
{
"device" : "/dev/video0",
"input" : 1,
"standard" : "PAL",
"width" : 720,
"height" : 576,
"frameDecimation" : 0,
"sizeDecimation" : 8,
"priority" : 1100,
"mode" : "2D",
"cropLeft" : 20,
"cropRight" : 22,
"cropTop" : 12,
"cropBottom" : 2,
"redSignalThreshold" : 0.1,
"greenSignalThreshold" : 0.1,
"blueSignalThreshold" : 0.1
},
/// The configuration of the XBMC connection used to enable and disable the frame-grabber. Contains the following fields:
/// * xbmcAddress : The IP address of the XBMC-host
/// * xbmcTcpPort : The TCP-port of the XBMC-server
/// * grabVideo : Flag indicating that the frame-grabber is on(true) during video playback
/// * grabPictures : Flag indicating that the frame-grabber is on(true) during picture show
/// * grabAudio : Flag indicating that the frame-grabber is on(true) during audio playback
/// * grabMenu : Flag indicating that the frame-grabber is on(true) in the XBMC menu
/// * grabScreensaver : Flag indicating that the frame-grabber is on(true) when XBMC is on screensaver
/// * enable3DDetection : Flag indicating that the frame-grabber should switch to a 3D compatible modus if a 3D video is playing
// "xbmcVideoChecker" :
// {
// "xbmcAddress" : "127.0.0.1",
// "xbmcTcpPort" : 9090,
// "grabVideo" : true,
// "grabPictures" : true,
// "grabAudio" : true,
// "grabMenu" : true,
// "grabScreensaver" : true,
// "enable3DDetection" : true
// },
/// The configuration of the Json server which enables the json remote interface
/// * port : Port at which the json server is started
"jsonServer" :
{
"port" : 19444
},
/// The configuration of the Proto server which enables the protobuffer remote interface
/// * port : Port at which the protobuffer server is started
"protoServer" :
{
"port" : 19445
},
/// The configuration of the boblight server which enables the boblight remote interface
/// * port : Port at which the boblight server is started
// "boblightServer" :
// {
// "port" : 19333
// },
"endOfJson" : "endOfJson"
}
Und der Screenshot:
- Dateianhänge
-
- screenshotSVHS.png (154.8 KiB) 8688 mal betrachtet
Hyperion Toggle Switch
Also ein Filecompare mit Notepad++ erkannte nur einen einzigen Unterschied. Und zwar den input 0 und 1.
Zuletzt geändert von Allodo am 7. Apr 2016, 17:45, insgesamt 2-mal geändert.
Hyperion Toggle Switch
Dann stimmt deine Bash Script für CHINCH nicht oder der favourite Eintrag hat einen Fehler.
Hat das Bash Script Ausführbare Rechte (chmod +x)?
Hat das Bash Script Ausführbare Rechte (chmod +x)?
Kein Support per PM!
Hyperion Toggle Switch
Antwort hat sich überschnitten
Es lag an der favourites.xml, trotzdem klappt Ambilight nicht.
EDIT: Der KODI-Hänger ist weg
Ist mir erst beim Namen kopieren in die favourites.xml aufgefallen. Und zwar hieß die "hyperion_grabberCINCH_aktivieren .sh" mit einem Leerzeichen am Ende. Dieses habe ich jetzt entfernt und KODI aktiviert das Script erfolgreich.
Habe vorsichtshalber noch einmal einen Screenshot erstellt, aber das Bild ist einwandfrei vorhanden.
Gebe dafür folgendes ein in putty:
Beim nächsten Versuch hängt die putty-Verbindung:
Mehr kommt nicht mehr.
Es lag an der favourites.xml, trotzdem klappt Ambilight nicht.
EDIT: Der KODI-Hänger ist weg
Ist mir erst beim Namen kopieren in die favourites.xml aufgefallen. Und zwar hieß die "hyperion_grabberCINCH_aktivieren .sh" mit einem Leerzeichen am Ende. Dieses habe ich jetzt entfernt und KODI aktiviert das Script erfolgreich.
Habe vorsichtshalber noch einmal einen Screenshot erstellt, aber das Bild ist einwandfrei vorhanden.
Gebe dafür folgendes ein in putty:
Code: Alles auswählen
LD_LIBRARY_PATH=/storage/hyperion/bin /storage/hyperion/bin/hyperion-v4l2 --input 0 --width 720 --height 576 --crop-top 2 --crop-left 2 --crop-bottom 2 --crop-right 10 --size-decimator 2 --frame-decimator 2 --screenshotBeim nächsten Versuch hängt die putty-Verbindung:
Code: Alles auswählen
V4L2 width=720 height=576
V4L2 pixel format=YUYV
V4L2 grabber signal threshold set to: {0,0,0}
V4L2 grabber started
Mehr kommt nicht mehr.
Hyperion Toggle Switch
Wenn der Grabber hängt bekommt er zu wenig Strom.
USB Port wechseln,
das hier machen http://powerpi.de/mit-diesem-einfachen- ... erry-pi-2/
USB-Verlängerungskabel vom Grabber zum PI entfernen/kürzeres nehmen.
USB Port wechseln,
das hier machen http://powerpi.de/mit-diesem-einfachen- ... erry-pi-2/
USB-Verlängerungskabel vom Grabber zum PI entfernen/kürzeres nehmen.
Kein Support per PM!
Hyperion Toggle Switch
Danke für den Tipp
Den Eintrag "max_usb_current=1" habe ich bereits in meiner Config.txt.
Der Grabber hängt bei mir direkt an der RPi2, ansonsten hängt nix an den USB-Ports. Und genügend Spannung bekommt der RPi2 auch, habe zumindest kein Quadrat in der oberen rechten Ecke.
Verstehe das ganze auch nicht so recht, da ich ja auch einen Screenshot erstellen konnte vom BD-Player (per Cinch). Sprich mal geht es und mal nicht. Zumal ein Switch auf den S-VHS-Eingang Ambilight laufen lässt, per Cinch dann jedoch nicht.
Gibt es evtl. irgendwo eine Log-Datei, welche nähere Infos geben kann, womit es zu tun haben kann?
Den Eintrag "max_usb_current=1" habe ich bereits in meiner Config.txt.
Der Grabber hängt bei mir direkt an der RPi2, ansonsten hängt nix an den USB-Ports. Und genügend Spannung bekommt der RPi2 auch, habe zumindest kein Quadrat in der oberen rechten Ecke.
Verstehe das ganze auch nicht so recht, da ich ja auch einen Screenshot erstellen konnte vom BD-Player (per Cinch). Sprich mal geht es und mal nicht. Zumal ein Switch auf den S-VHS-Eingang Ambilight laufen lässt, per Cinch dann jedoch nicht.
Gibt es evtl. irgendwo eine Log-Datei, welche nähere Infos geben kann, womit es zu tun haben kann?