hey...
ich habe mich über die anleitung (die echt genial is) immer stück für stück voran gearbeitet.
leider hänge ich schon wieder fest.
die leds wollen nicht mehr leuchten wenn ich auf externe quelle umschalten. komischerweise hat es gestern schon mal funktioniert finde den fehler aber nicht. ich habe den led startpunkt um 5 leds versetzt (in hyperion) danach ging es nicht mehr. (meine ich)
mit kodi gehen die leds wie sie sollen.
wenn ich auf externe quelle umschalten (Favoriten) geht nix.
hab schon nen Screenshot gemacht laut anleitung. bekomme genau das bild das ich einspeise.
ich hänge mal meine config datei an. vielleicht kann man da schon sehen woran es liegt.
Raspberry pi2, kodi 15.2, openelec 6.0.1
-
Experiments
- Neuling
- Beiträge:13
- Registriert:2. Feb 2016
Ambilight über externe quelle will nicht
- Dateianhänge
-
- hyperion.config.grabber.rar
- (3.34 KiB) 177-mal heruntergeladen
Ambilight über externe quelle will nicht
Häng die configs bitte wie hier gefordert als Text rein, ich lad bestimmt keine rar Datei runter 
viewtopic.php?f=8&t=836
viewtopic.php?f=8&t=836
Kein Support per PM!
-
Experiments
- Neuling
- Beiträge:13
- Registriert:2. Feb 2016
Ambilight über externe quelle will nicht
sorry..........
hier die hyperion config:
hier die config vom raspberry:
hier die hyperion config:
Code: Alles auswählen
// Automatically generated configuration file for 'Hyperion daemon'
// Generated by: HyperCon (The Hyperion deamon configuration file builder
{
/// Device configuration contains the following fields:
/// * 'name' : The user friendly name of the device (only used for display purposes)
/// * 'type' : The type of the device or leds (known types for now are 'ws2801', 'ldp8806',
/// 'lpd6803', 'sedu', 'adalight', 'lightpack', 'test' and 'none')
/// * 'output' : The output specification depends on selected device. This can for example be the
/// device specifier, device serial number, or the output file name
/// * 'rate' : The baudrate of the output to the device
/// * 'colorOrder' : The order of the color bytes ('rgb', 'rbg', 'bgr', etc.).
"device" :
{
"name" : "MyPi",
"type" : "ws2801",
"output" : "/dev/spidev0.0",
"rate" : 250000,
"colorOrder" : "rbg"
},
/// Color manipulation configuration used to tune the output colors to specific surroundings.
/// The configuration contains a list of color-transforms. Each transform contains the
/// following fields:
/// * 'id' : The unique identifier of the color transformation (eg 'device_1') /// * 'leds' : The indices (or index ranges) of the leds to which this color transform applies
/// (eg '0-5, 9, 11, 12-17'). The indices are zero based. /// * 'hsv' : The manipulation in the Hue-Saturation-Value color domain with the following
/// tuning parameters:
/// - 'saturationGain' The gain adjustement of the saturation
/// - 'valueGain' The gain adjustement of the value
/// * 'red'/'green'/'blue' : The manipulation in the Red-Green-Blue color domain with the
/// following tuning parameters for each channel:
/// - 'threshold' The minimum required input value for the channel to be on
/// (else zero)
/// - 'gamma' The gamma-curve correction factor
/// - 'blacklevel' The lowest possible value (when the channel is black)
/// - 'whitelevel' The highest possible value (when the channel is white)
///
/// Next to the list with color transforms there is also a smoothing option.
/// * 'smoothing' : Smoothing of the colors in the time-domain with the following tuning
/// parameters:
/// - 'type' The type of smoothing algorithm ('linear' or 'none')
/// - 'time_ms' The time constant for smoothing algorithm in milliseconds
/// - 'updateFrequency' The update frequency of the leds in Hz
"color" :
{
"transform" :
[
{
"id" : "default",
"leds" : "*",
"hsv" :
{
"saturationGain" : 1.0500,
"valueGain" : 1.0000
},
"red" :
{
"threshold" : 0.1900,
"gamma" : 2.0000,
"blacklevel" : 0.0000,
"whitelevel" : 1.0000
},
"green" :
{
"threshold" : 0.1900,
"gamma" : 2.0000,
"blacklevel" : 0.0000,
"whitelevel" : 0.8000
},
"blue" :
{
"threshold" : 0.1900,
"gamma" : 2.0000,
"blacklevel" : 0.0000,
"whitelevel" : 0.7000
}
}
],
"smoothing" :
{
"type" : "linear",
"time_ms" : 100,
"updateFrequency" : 25.0000
}
},
/// The configuration for each individual led. This contains the specification of the area
/// averaged of an input image for each led to determine its color. Each item in the list
/// contains the following fields:
/// * index: The index of the led. This determines its location in the string of leds; zero
/// being the first led.
/// * hscan: The fractional part of the image along the horizontal used for the averaging
/// (minimum and maximum inclusive)
/// * vscan: The fractional part of the image along the vertical used for the averaging
/// (minimum and maximum inclusive)
"leds" :
[
{
"index" : 0,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.7632, "maximum" : 0.7895 }
},
{
"index" : 1,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.7895, "maximum" : 0.8158 }
},
{
"index" : 2,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.8158, "maximum" : 0.8421 }
},
{
"index" : 3,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.8421, "maximum" : 0.8684 }
},
{
"index" : 4,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.8684, "maximum" : 0.8947 }
},
{
"index" : 5,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.8947, "maximum" : 0.9211 }
},
{
"index" : 6,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.9211, "maximum" : 0.9474 }
},
{
"index" : 7,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.9474, "maximum" : 0.9737 }
},
{
"index" : 8,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.9737, "maximum" : 1.0000 }
},
{
"index" : 9,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 10,
"hscan" : { "minimum" : 0.9000, "maximum" : 0.9500 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 11,
"hscan" : { "minimum" : 0.8500, "maximum" : 0.9000 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 12,
"hscan" : { "minimum" : 0.8000, "maximum" : 0.8500 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 13,
"hscan" : { "minimum" : 0.7500, "maximum" : 0.8000 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 14,
"hscan" : { "minimum" : 0.7000, "maximum" : 0.7500 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 15,
"hscan" : { "minimum" : 0.6500, "maximum" : 0.7000 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 16,
"hscan" : { "minimum" : 0.6000, "maximum" : 0.6500 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 17,
"hscan" : { "minimum" : 0.5500, "maximum" : 0.6000 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 18,
"hscan" : { "minimum" : 0.5000, "maximum" : 0.5500 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 19,
"hscan" : { "minimum" : 0.4500, "maximum" : 0.5000 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 20,
"hscan" : { "minimum" : 0.4000, "maximum" : 0.4500 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 21,
"hscan" : { "minimum" : 0.3500, "maximum" : 0.4000 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 22,
"hscan" : { "minimum" : 0.3000, "maximum" : 0.3500 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 23,
"hscan" : { "minimum" : 0.2500, "maximum" : 0.3000 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 24,
"hscan" : { "minimum" : 0.2000, "maximum" : 0.2500 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 25,
"hscan" : { "minimum" : 0.1500, "maximum" : 0.2000 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 26,
"hscan" : { "minimum" : 0.1000, "maximum" : 0.1500 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 27,
"hscan" : { "minimum" : 0.0500, "maximum" : 0.1000 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 28,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 29,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.9737, "maximum" : 1.0000 }
},
{
"index" : 30,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.9474, "maximum" : 0.9737 }
},
{
"index" : 31,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.9211, "maximum" : 0.9474 }
},
{
"index" : 32,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.8947, "maximum" : 0.9211 }
},
{
"index" : 33,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.8684, "maximum" : 0.8947 }
},
{
"index" : 34,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.8421, "maximum" : 0.8684 }
},
{
"index" : 35,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.8158, "maximum" : 0.8421 }
},
{
"index" : 36,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.7895, "maximum" : 0.8158 }
},
{
"index" : 37,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.7632, "maximum" : 0.7895 }
},
{
"index" : 38,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.7368, "maximum" : 0.7632 }
},
{
"index" : 39,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.7105, "maximum" : 0.7368 }
},
{
"index" : 40,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.6842, "maximum" : 0.7105 }
},
{
"index" : 41,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.6579, "maximum" : 0.6842 }
},
{
"index" : 42,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.6316, "maximum" : 0.6579 }
},
{
"index" : 43,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.6053, "maximum" : 0.6316 }
},
{
"index" : 44,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.5789, "maximum" : 0.6053 }
},
{
"index" : 45,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.5526, "maximum" : 0.5789 }
},
{
"index" : 46,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.5263, "maximum" : 0.5526 }
},
{
"index" : 47,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.5000, "maximum" : 0.5263 }
},
{
"index" : 48,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.4737, "maximum" : 0.5000 }
},
{
"index" : 49,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.4474, "maximum" : 0.4737 }
},
{
"index" : 50,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.4211, "maximum" : 0.4474 }
},
{
"index" : 51,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.3947, "maximum" : 0.4211 }
},
{
"index" : 52,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.3684, "maximum" : 0.3947 }
},
{
"index" : 53,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.3421, "maximum" : 0.3684 }
},
{
"index" : 54,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.3158, "maximum" : 0.3421 }
},
{
"index" : 55,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.2895, "maximum" : 0.3158 }
},
{
"index" : 56,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.2632, "maximum" : 0.2895 }
},
{
"index" : 57,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.2368, "maximum" : 0.2632 }
},
{
"index" : 58,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.2105, "maximum" : 0.2368 }
},
{
"index" : 59,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.1842, "maximum" : 0.2105 }
},
{
"index" : 60,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.1579, "maximum" : 0.1842 }
},
{
"index" : 61,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.1316, "maximum" : 0.1579 }
},
{
"index" : 62,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.1053, "maximum" : 0.1316 }
},
{
"index" : 63,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.0789, "maximum" : 0.1053 }
},
{
"index" : 64,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.0526, "maximum" : 0.0789 }
},
{
"index" : 65,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.0263, "maximum" : 0.0526 }
},
{
"index" : 66,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0263 }
},
{
"index" : 67,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 68,
"hscan" : { "minimum" : 0.0500, "maximum" : 0.1000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 69,
"hscan" : { "minimum" : 0.1000, "maximum" : 0.1500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 70,
"hscan" : { "minimum" : 0.1500, "maximum" : 0.2000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 71,
"hscan" : { "minimum" : 0.2000, "maximum" : 0.2500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 72,
"hscan" : { "minimum" : 0.2500, "maximum" : 0.3000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 73,
"hscan" : { "minimum" : 0.3000, "maximum" : 0.3500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 74,
"hscan" : { "minimum" : 0.3500, "maximum" : 0.4000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 75,
"hscan" : { "minimum" : 0.4000, "maximum" : 0.4500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 76,
"hscan" : { "minimum" : 0.4500, "maximum" : 0.5000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 77,
"hscan" : { "minimum" : 0.5000, "maximum" : 0.5500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 78,
"hscan" : { "minimum" : 0.5500, "maximum" : 0.6000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 79,
"hscan" : { "minimum" : 0.6000, "maximum" : 0.6500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 80,
"hscan" : { "minimum" : 0.6500, "maximum" : 0.7000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 81,
"hscan" : { "minimum" : 0.7000, "maximum" : 0.7500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 82,
"hscan" : { "minimum" : 0.7500, "maximum" : 0.8000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 83,
"hscan" : { "minimum" : 0.8000, "maximum" : 0.8500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 84,
"hscan" : { "minimum" : 0.8500, "maximum" : 0.9000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 85,
"hscan" : { "minimum" : 0.9000, "maximum" : 0.9500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 86,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 87,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0263 }
},
{
"index" : 88,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0263, "maximum" : 0.0526 }
},
{
"index" : 89,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0526, "maximum" : 0.0789 }
},
{
"index" : 90,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0789, "maximum" : 0.1053 }
},
{
"index" : 91,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.1053, "maximum" : 0.1316 }
},
{
"index" : 92,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.1316, "maximum" : 0.1579 }
},
{
"index" : 93,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.1579, "maximum" : 0.1842 }
},
{
"index" : 94,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.1842, "maximum" : 0.2105 }
},
{
"index" : 95,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.2105, "maximum" : 0.2368 }
},
{
"index" : 96,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.2368, "maximum" : 0.2632 }
},
{
"index" : 97,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.2632, "maximum" : 0.2895 }
},
{
"index" : 98,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.2895, "maximum" : 0.3158 }
},
{
"index" : 99,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.3158, "maximum" : 0.3421 }
},
{
"index" : 100,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.3421, "maximum" : 0.3684 }
},
{
"index" : 101,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.3684, "maximum" : 0.3947 }
},
{
"index" : 102,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.3947, "maximum" : 0.4211 }
},
{
"index" : 103,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.4211, "maximum" : 0.4474 }
},
{
"index" : 104,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.4474, "maximum" : 0.4737 }
},
{
"index" : 105,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.4737, "maximum" : 0.5000 }
},
{
"index" : 106,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.5000, "maximum" : 0.5263 }
},
{
"index" : 107,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.5263, "maximum" : 0.5526 }
},
{
"index" : 108,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.5526, "maximum" : 0.5789 }
},
{
"index" : 109,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.5789, "maximum" : 0.6053 }
},
{
"index" : 110,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.6053, "maximum" : 0.6316 }
},
{
"index" : 111,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.6316, "maximum" : 0.6579 }
},
{
"index" : 112,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.6579, "maximum" : 0.6842 }
},
{
"index" : 113,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.6842, "maximum" : 0.7105 }
},
{
"index" : 114,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.7105, "maximum" : 0.7368 }
},
{
"index" : 115,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.7368, "maximum" : 0.7632 }
}
],
/// The black border configuration, contains the following items:
/// * enable : true if the detector should be activated
/// * threshold : Value below which a pixel is regarded as black (value between 0.0 and 1.0)
"blackborderdetector" :
{
"enable" : true,
"threshold" : 0.14
},
/// The configuration of the effect engine, contains the following items:
/// * paths : An array with absolute location(s) of directories with effects
/// * bootsequence : The effect selected as 'boot sequence'
"effects" :
{
"paths" :
[
"/storage/hyperion/effects"
]
},
"bootsequence" :
{
"effect" : "Rainbow swirl fast",
"duration_ms" : 3000
},
/// The configuration for the frame-grabber, contains the following items:
/// * width : The width of the grabbed frames [pixels]
/// * height : The height of the grabbed frames [pixels]
/// * frequency_Hz : The frequency of the frame grab [Hz]
// "grabber-v4l2" :
{
"device" : "/dev/video0",
"input" : 0,
"standard" : "NTSC",
"width" : -1,
"height" : -1,
"frameDecimation" : 2,
"sizeDecimation" : 4,
"priority" : 800,
"mode" : "2D",
"cropLeft" : 6,
"cropRight" : 6,
"cropTop" : 2,
"cropBottom" : 2,
"redSignalThreshold" : 0.1,
"greenSignalThreshold" : 0.1,
"blueSignalThreshold" : 0.1
},
/// The configuration of the XBMC connection used to enable and disable the frame-grabber. Contains the following fields:
/// * xbmcAddress : The IP address of the XBMC-host
/// * xbmcTcpPort : The TCP-port of the XBMC-server
/// * grabVideo : Flag indicating that the frame-grabber is on(true) during video playback
/// * grabPictures : Flag indicating that the frame-grabber is on(true) during picture show
/// * grabAudio : Flag indicating that the frame-grabber is on(true) during audio playback
/// * grabMenu : Flag indicating that the frame-grabber is on(true) in the XBMC menu
/// * grabScreensaver : Flag indicating that the frame-grabber is on(true) when XBMC is on screensaver
/// * enable3DDetection : Flag indicating that the frame-grabber should switch to a 3D compatible modus if a 3D video is playing
// "xbmcVideoChecker" :
// {
// "xbmcAddress" : "127.0.0.1",
// "xbmcTcpPort" : 9090,
// "grabVideo" : true,
// "grabPictures" : true,
// "grabAudio" : true,
// "grabMenu" : false,
// "grabScreensaver" : true,
// "enable3DDetection" : true
// },
/// The configuration of the Json server which enables the json remote interface
/// * port : Port at which the json server is started
"jsonServer" :
{
"port" : 19444
},
/// The configuration of the Proto server which enables the protobuffer remote interface
/// * port : Port at which the protobuffer server is started
"protoServer" :
{
"port" : 19445
},
/// The configuration of the boblight server which enables the boblight remote interface
/// * port : Port at which the boblight server is started
// "boblightServer" :
// {
// "port" : 19333
// },
"endOfJson" : "endOfJson"
}
hier die config vom raspberry:
Code: Alles auswählen
################################################################################
# This file is part of OpenELEC - http://www.openelec.tv
# Copyright (C) 2009-2014 Stephan Raue (stephan@openelec.tv)
# Inspired and partly copied from:
# http://youresuchageek.blogspot.fr/2012/09/howto-raspberry-pi-openelec-on.html
#
# OpenELEC is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 2 of the License, or
# (at your option) any later version.
#
# OpenELEC is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with OpenELEC. If not, see <http://www.gnu.org/licenses/>.
################################################################################
# Bootloader configuration - config.txt
################################################################################
################################################################################
# Memory (System/GPU configuration )
################################################################################
# default GPU memory split (do not change if you do not know what you are doing)
gpu_mem=128
# SDRAM size based GPU memory split, uncomment and setup to override 'gpu_mem'
gpu_mem_256=112
gpu_mem_512=160
gpu_mem_1024=256
################################################################################
# Overclocking settings
# WARNING: Do not change/enable if you do not know what you are doing!
# The System may become unstable or you can have data corruption or
# you can loose your warranty if you set wrong settings
#
# please read: http://elinux.org/RPi_config.txt#Overclocking_configuration
################################################################################
# Overclock mode settings.
#
# default recommended values are: arm_freq | core_freq | sdram_freq | over_voltage
# no overclocking : 700 | 250 | 400 | 0
# mode 'Modest' : 800 | 300 | 400 | 0
# mode 'Medium' : 900 | 333 | 450 | 2
# mode 'High' : 950 | 450 | 450 | 6
# mode 'Turbo' : 1000 | 500 | 600 | 6
# mode 'Pi2' : 1000 | 500 | 500 | 2
# arm_freq=700
# core_freq=250
# sdram_freq=400
# over_voltage=0
# set to 'force_turbo=1' to disable dynamic overclocking (you can lose your warranty!)
force_turbo=0
# If you have any data corruption using Turbo Mode and overclocking
# try with this setting uncommented
# If this still fails, try to use Medium mode without "over_voltage=2"
# If it ultimately keeps failing, forget about this until it gets fixed
# Use a more conservative mode that will works fine in any cases:
# initial_turbo=30
################################################################################
# Overscan settings
################################################################################
# Make display smaller to stop text spilling off the screen
# see also http://www.raspberrypi.org/phpBB3/viewtopic.php?f=67&t=15700
# overscan_scale=1
# disable_overscan=1
# Adapt overscan values to your needs
# overscan_left=57
# overscan_right=59
# overscan_top=20
# overscan_bottom=20
################################################################################
# various settings see also: http://elinux.org/RPi_config.txt
################################################################################
# Force HDMI even if unplugged or powered off
hdmi_force_hotplug=1
# Doesn't sent initial active source message.
# Avoids bringing CEC (enabled TV) out of standby and channel switch when
# rebooting.
hdmi_ignore_cec_init=1
################################################################################
# License keys to enable GPU hardware decoding for various codecs
# to obtain keys visit the shop at http://www.raspberrypi.com
################################################################################
# decode_MPG2=0x00000000
# decode_WVC1=0x00000000
# decode_DTS=0x00000000
# decode_DDP=0x00000000
################################################################################
# End of default configuration
# all values below this line were inserted from config.txt.bk (your old config)
# and can be merged with the above values
################################################################################
# Ambilight Modul aktivieren
dtparam=spi=on
# mehr USB-Power
max_usb_current=1Ambilight über externe quelle will nicht
deine hyperion.config.json ist fehlerhaft - wieso ist da
auskommentiert?
Und was meinst du mit versetzt?! Der Startpunkt ist immer der gleiche, an dem Punkt wo die beiden Datenleitungen rein gehen?!
Code: Alles auswählen
// "grabber-v4l2" :
auskommentiert?
Und was meinst du mit versetzt?! Der Startpunkt ist immer der gleiche, an dem Punkt wo die beiden Datenleitungen rein gehen?!
Kein Support per PM!
-
Experiments
- Neuling
- Beiträge:13
- Registriert:2. Feb 2016
Ambilight über externe quelle will nicht
ich hab den start punkt erst unten links gehabt (wenn man von vorne guckt) da fangen die leds auch an. dann passen die farben aber nicht wenn ich mir das rgb testbild angucke. darum habe ich den start punkt um 5 leds weiter nach vorne versetzt.(s.bild) wenn ich mir jetzt das rgb test bild angucke is grün 100% in der mitte. vorher war grün rechts unten und links oben. warum auch immer.
musste in hyperion auch rbg einstellen. sonst haben die farben nicht gepasst. (hong kong leds)
hab die config angepasst. geht jetzt. was so zwei kleine " // " (striche) aus machen.
Vielen dank.
zwei fragen noch.
1. wenn ich mir den screenshot angucke, ist da nicht das ganze receiver bild drauf. sieht aus als ob unten was fehlt (s.bild)
Das prosieben logo sieht man aber unten den text nicht.
2. nach kuzer zeit gehen die leds aus. muss dann wieder externe quelle wählen dann geht es wieder für einige zeit.
musste in hyperion auch rbg einstellen. sonst haben die farben nicht gepasst. (hong kong leds)
hab die config angepasst. geht jetzt. was so zwei kleine " // " (striche) aus machen.
Vielen dank.
zwei fragen noch.
1. wenn ich mir den screenshot angucke, ist da nicht das ganze receiver bild drauf. sieht aus als ob unten was fehlt (s.bild)
Das prosieben logo sieht man aber unten den text nicht.
2. nach kuzer zeit gehen die leds aus. muss dann wieder externe quelle wählen dann geht es wieder für einige zeit.
- Dateianhänge
-
-
- screenshot.png (33.72 KiB) 4411 mal betrachtet
-
Experiments
- Neuling
- Beiträge:13
- Registriert:2. Feb 2016
Ambilight über externe quelle will nicht
Hab grad in dem beitrag von dir gelesen das ich einfach "pal" einstellen muss.
Gesendet von meinem GT-I9505 mit Tapatalk
Gesendet von meinem GT-I9505 mit Tapatalk
Ambilight über externe quelle will nicht
Ach du meintest den offset - ja klar - macht Sinn - hab das vorhin missverstanden 
Wenn nach kurzer Zeit die LEDs ausgehen scheint hyperion abzuschmieren - versuch den Grabber mal an einem anderen USB Port und/oder ein etwaig vorhandenes USB-Verlängerungskabel entfernen bzw ein kürzeres nehmen - kann auch am Grabber liegen.
Wenn nach kurzer Zeit die LEDs ausgehen scheint hyperion abzuschmieren - versuch den Grabber mal an einem anderen USB Port und/oder ein etwaig vorhandenes USB-Verlängerungskabel entfernen bzw ein kürzeres nehmen - kann auch am Grabber liegen.
Kein Support per PM!