Benutzeravatar
Mumpel
Neuling

Beiträge:10
Registriert:21. Apr 2016

externe Geräte funktionieren nicht

21. Apr 2016, 11:27

Hi ich habe ein Problem

Ich bekomme den Grabber nicht zum laufen.
Ambilight in Kodi funktioniert

Habe den Grabber direkt an meinen tv über scart signal kommt auch raus habe nen Videorecorder angehängt und konnte das laufende TV Programm aufzeichnen


vielleicht fällt jemanden was ein

Code: Alles auswählen

// Automatically generated configuration file for 'Hyperion daemon'
// Generated by: HyperCon (The Hyperion deamon configuration file builder)
// Created with HyperCon V1.00.1 (15.03.2016)

{
   /// Device configuration contains the following fields:
   /// * 'name'       : The user friendly name of the device (only used for display purposes)
   /// * 'type'       : The type of the device or leds (known types for now are
   /// -------------SPI---------------, APA102, WS2801, P9813, LPD6803, LPD8806, -------------PWM---------------, WS2812b, WS281x (no 12b), ------------OTHER-------------, PhilipsHUE, AtmoOrb, PiBlaster, ThinkerForge, UDP, SEDU, TPM2, USBASP-WS2801, USBASP-WS2812, ----------3rd PARTY------------, Adalight, AdalightAPA102, AmbiLed, Atmo, Lightberry, Lightpack, Multi-Lightpack, Paintpack, Test, None)
   /// * [device type specific configuration]
   /// * 'colorOrder' : The order of the color bytes ('rgb', 'rbg', 'bgr', etc.).
   ///
   /// * 'Specific of Philips Hue:
   /// * 'username'         : The name of user registred on the Philips Hue Bridge
   /// * 'switchOffOnBlack': Define if Hue light switch off when black is detected
   /// * 'transitiontime'    : Set the time of transition between color of Hue light
   "device" :
   {
      "name"       : "MyPi",
      "type"       : "ws2801",
      "output"     : "/dev/spidev0.0",
      "rate"     : 250000,
      "colorOrder" : "rbg"
   },

   /// Color manipulation configuration used to tune the output colors to specific surroundings.
   /// The configuration contains a list of color-transforms. Each transform contains the
   /// following fields:
   ///  * 'id'   : The unique identifier of the color transformation (eg 'device_1')   ///  * 'leds' : The indices (or index ranges) of the leds to which this color transform applies
   ///             (eg '0-5, 9, 11, 12-17'). The indices are zero based.   ///  * 'hsv' : The manipulation in the Hue-Saturation-Value color domain with the following
   ///            tuning parameters:
   ///            - 'saturationGain'  The gain adjustement of the saturation
   ///            - 'valueGain'       The gain adjustement of the value
   ///  * 'red'/'green'/'blue' : The manipulation in the Red-Green-Blue color domain with the
   ///                           following tuning parameters for each channel:
   ///            - 'threshold'       The minimum required input value for the channel to be on
   ///                                (else zero)
   ///            - 'gamma'           The gamma-curve correction factor
   ///            - 'blacklevel'      The lowest possible value (when the channel is black)
   ///            - 'whitelevel'      The highest possible value (when the channel is white)
   ///
   /// Next to the list with color transforms there is also a smoothing option.
   ///  * 'smoothing' : Smoothing of the colors in the time-domain with the following tuning
   ///                  parameters:
   ///            - 'type'            The type of smoothing algorithm ('linear' or 'none')
   ///            - 'time_ms'         The time constant for smoothing algorithm in milliseconds
   ///            - 'updateFrequency' The update frequency of the leds in Hz
   ///            - 'updateDelay'     The delay of the output to leds (in periods of smoothing)
   "color" :
   {
      "transform" :
      [
         {
            "id"   : "default",
            "leds" : "*",
            "hsv" :
            {
               "saturationGain" : 1.4500,
               "valueGain"      : 1.4000
            },
            "red" :
            {
               "threshold"  : 0.1000,
               "gamma"      : 1.0000,
               "blacklevel" : 0.0000,
               "whitelevel" : 1.0000
            },
            "green" :
            {
               "threshold"  : 0.1000,
               "gamma"      : 1.0000,
               "blacklevel" : 0.0000,
               "whitelevel" : 0.2800
            },
            "blue" :
            {
               "threshold"  : 0.1000,
               "gamma"      : 1.0000,
               "blacklevel" : 0.0000,
               "whitelevel" : 0.1700
            }
         }
      ],
      "smoothing" :
      {
         "type"            : "linear",
         "time_ms"         : 100,
         "updateFrequency" : 25.0000,
         "updateDelay"     : 0
      }
   },

   /// The black border configuration, contains the following items:
   ///  * enable             : true if the detector should be activated
   ///  * threshold          : Value below which a pixel is regarded as black (value between 0.0 and 1.0)
   ///  * unknownFrameCnt      : Number of frames without any detection before the border is set to 0 (default 600)
   ///  * borderFrameCnt      : Number of frames before a consistent detected border gets set (default 50)
   ///  * maxInconsistentCnt    : Number of inconsistent frames that are ignored before a new border gets a chance to proof consistency
   ///  * blurRemoveCnt      : Number of pixels that get removed from the detected border to cut away blur (default 1)
   ///  * mode             : Border detection mode (values=default,classic,osd)
   "blackborderdetector" :
   {
      "enable" : true,
      "threshold" : 0.14,
      "unknownFrameCnt" : 600,
      "borderFrameCnt" : 50,
      "maxInconsistentCnt" : 10,
      "blurRemoveCnt" : 1,
      "mode" : "default"
   },

   /// The configuration of the effect engine, contains the following items:
   ///  * paths      : An array with absolute location(s) of directories with effects
   ///  * color       : Set static color after boot -> set effect to "" (empty) and input the values [R,G,B] and set duration_ms NOT to 0 (use 1) instead
   ///  * effect       : The effect selected as 'boot sequence'
   ///  * duration_ms   : The duration of the selected effect (0=endless)
   ///  * priority    : The priority of the selected effect/static color (default=990) HINT: lower value result in HIGHER priority!
   "effects" :
   {
      "paths" :
      [
         "/storage/hyperion/effects"
      ]
   },

   "bootsequence" :
   {
      "color" : [0,0,0],
      "effect" : "Rainbow swirl fast",
      "duration_ms" : 3000,
      "priority" : 990
   },

   /// The configuration of the Json/Proto forwarder. Forward messages to multiple instances of Hyperion on same and/or other hosts
   /// 'proto' is mostly used for video streams and 'json' for effects
   ///  * proto   : Proto server adress and port of your target. Syntax:[IP:PORT] -> ["127.0.0.1:19447"] or more instances to forward ["127.0.0.1:19447","192.168.0.24:19449"]
   ///  * json   : Json server adress and port of your target. Syntax:[IP:PORT] -> ["127.0.0.1:19446"] or more instances to forward ["127.0.0.1:19446","192.168.0.24:19448"]
   ///  HINT:   If you redirect to "127.0.0.1" (localhost) you could start a second hyperion with another device/led config!
   ///       Be sure your client(s) is/are listening on the configured ports. The second Hyperion (if used) also needs to be configured! (HyperCon -> External -> Json Server/Proto Server)
//    "forwarder" :
//    {
//       "proto" : ["127.0.0.1:19447"],
//       "json" : ["127.0.0.1:19446"]
//    },

   ///  The configuration for the frame-grabber, contains the following items:
   ///   * width        : The width of the grabbed frames [pixels]
   ///   * height       : The height of the grabbed frames [pixels]
   ///   * frequency_Hz : The frequency of the frame grab [Hz]
   ///   * priority     : The priority of the frame-gabber (Default=900) HINT: lower value result in HIGHER priority!
   ///   * ATTENTION    : Power-of-Two resolution is not supported and leads to unexpected behaviour!
//    "framegrabber" :
//    {
//       "width" : 80,
//       "height" : 45,
//       "frequency_Hz" : 10.0,
//       "priority" : 900
//    },

   /// The configuration of the Kodi connection used to enable and disable the frame-grabber. Contains the following fields:
   ///  * xbmcAddress       : The IP address of the Kodi-host
   ///  * xbmcTcpPort       : The TCP-port of the Kodi-server
   ///  * grabVideo         : Flag indicating that the frame-grabber is on(true) during video playback
   ///  * grabPictures      : Flag indicating that the frame-grabber is on(true) during picture show
   ///  * grabAudio         : Flag indicating that the frame-grabber is on(true) during audio playback
   ///  * grabMenu          : Flag indicating that the frame-grabber is on(true) at the Kodi menu
   ///  * grabScreensaver   : Flag indicating that the frame-grabber is on(true) when Kodi is on screensaver
   ///  * enable3DDetection : Flag indicating that the frame-grabber should switch to a 3D compatible modus if a 3D video is playing
//    "xbmcVideoChecker" :
//    {
//       "xbmcAddress" : "127.0.0.1",
//       "xbmcTcpPort" : 9090,
//       "grabVideo" : true,
//       "grabPictures" : true,
//       "grabAudio" : true,
//       "grabMenu" : false,
//       "grabScreensaver" : true,
//       "enable3DDetection" : true
//    },

   /// The configuration of the Json server which enables the json remote interface
   ///  * port : Port at which the json server is started
   "jsonServer" :
   {
      "port" : 19444
   },

   /// The configuration of the Proto server which enables the protobuffer remote interface
   ///  * port : Port at which the protobuffer server is started
   "protoServer" :
   {
      "port" : 19445
   },

   /// The configuration of the boblight server which enables the boblight remote interface
   ///  * port    : Port at which the boblight server is started
   ///  * priority: Priority of the boblight server (Default=900) HINT: lower value result in HIGHER priority!
//    "boblightServer" :
//    {
//       "port" : 19333,
//       "priority" : 900
//    },

   /// Configuration for the embedded V4L2 grabber
   ///  * device          : V4L2 Device to use [default="/dev/video0"]
   ///  * input           : V4L2 input to use [default=0]
   ///  * standard        : Video standard (no-change/PAL/NTSC) [default="no-change"]
   ///  * width                : V4L2 width to set [default=-1]
   ///  * height               : V4L2 height to set [default=-1]
   ///  * frameDecimation      : Frame decimation factor [default=2]
   ///  * sizeDecimation       : Size decimation factor [default=8]
   ///  * priority             : Hyperion priority channel [default=800]
   ///  * mode                 : 3D mode to use 2D/3DSBS/3DTAB (note: no autodetection) [default="2D"]
   ///  * cropLeft             : Cropping from the left [default=0]
   ///  * cropRight            : Cropping from the right [default=0]
   ///  * cropTop              : Cropping from the top [default=0]
   ///  * cropBottom           : Cropping from the bottom [default=0]
   ///  * redSignalThreshold   : Signal threshold for the red channel between 0.0 and 1.0 [default=0.0]
   ///  * greenSignalThreshold : Signal threshold for the green channel between 0.0 and 1.0 [default=0.0]
   ///  * blueSignalThreshold  : Signal threshold for the blue channel between 0.0 and 1.0 [default=0.0]
   "grabber-v4l2" :
   {
      "device" : "/dev/video0",
      "input" : 0,
      "standard" : "no-change",
      "width" : -1,
      "height" : -1,
      "frameDecimation" : 2,
      "sizeDecimation" : 4,
      "priority" : 800,
      "mode" : "2D",
      "cropLeft" : 6,
      "cropRight" : 6,
      "cropTop" : 2,
      "cropBottom" : 2,
      "redSignalThreshold" : 0.1,
      "greenSignalThreshold" : 0.1,
      "blueSignalThreshold" : 0.1
   },

   ///  The configuration for each individual led. This contains the specification of the area
   ///  averaged of an input image for each led to determine its color. Each item in the list
   ///  contains the following fields:
   ///  * index: The index of the led. This determines its location in the string of leds; zero
   ///           being the first led.
   ///  * hscan: The fractional part of the image along the horizontal used for the averaging
   ///           (minimum and maximum inclusive)
   ///  * vscan: The fractional part of the image along the vertical used for the averaging
   ///           (minimum and maximum inclusive)
   "leds" :
   [
      {
         "index" : 0,
         "hscan" : { "minimum" : 0.4737, "maximum" : 0.5000 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 1,
         "hscan" : { "minimum" : 0.5263, "maximum" : 0.5526 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 2,
         "hscan" : { "minimum" : 0.5526, "maximum" : 0.5789 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 3,
         "hscan" : { "minimum" : 0.5789, "maximum" : 0.6053 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 4,
         "hscan" : { "minimum" : 0.6053, "maximum" : 0.6316 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 5,
         "hscan" : { "minimum" : 0.6316, "maximum" : 0.6579 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 6,
         "hscan" : { "minimum" : 0.6579, "maximum" : 0.6842 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 7,
         "hscan" : { "minimum" : 0.6842, "maximum" : 0.7105 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 8,
         "hscan" : { "minimum" : 0.7105, "maximum" : 0.7368 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 9,
         "hscan" : { "minimum" : 0.7368, "maximum" : 0.7632 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 10,
         "hscan" : { "minimum" : 0.7632, "maximum" : 0.7895 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 11,
         "hscan" : { "minimum" : 0.7895, "maximum" : 0.8158 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 12,
         "hscan" : { "minimum" : 0.8158, "maximum" : 0.8421 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 13,
         "hscan" : { "minimum" : 0.8421, "maximum" : 0.8684 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 14,
         "hscan" : { "minimum" : 0.8684, "maximum" : 0.8947 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 15,
         "hscan" : { "minimum" : 0.8947, "maximum" : 0.9211 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 16,
         "hscan" : { "minimum" : 0.9211, "maximum" : 0.9474 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 17,
         "hscan" : { "minimum" : 0.9474, "maximum" : 0.9737 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 18,
         "hscan" : { "minimum" : 0.9737, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 19,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.9524, "maximum" : 1.0000 }
      },
      {
         "index" : 20,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.9048, "maximum" : 0.9524 }
      },
      {
         "index" : 21,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.8571, "maximum" : 0.9048 }
      },
      {
         "index" : 22,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.8095, "maximum" : 0.8571 }
      },
      {
         "index" : 23,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.7619, "maximum" : 0.8095 }
      },
      {
         "index" : 24,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.7143, "maximum" : 0.7619 }
      },
      {
         "index" : 25,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.6667, "maximum" : 0.7143 }
      },
      {
         "index" : 26,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.6190, "maximum" : 0.6667 }
      },
      {
         "index" : 27,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.5714, "maximum" : 0.6190 }
      },
      {
         "index" : 28,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.5238, "maximum" : 0.5714 }
      },
      {
         "index" : 29,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.4762, "maximum" : 0.5238 }
      },
      {
         "index" : 30,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.4286, "maximum" : 0.4762 }
      },
      {
         "index" : 31,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.3810, "maximum" : 0.4286 }
      },
      {
         "index" : 32,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.3333, "maximum" : 0.3810 }
      },
      {
         "index" : 33,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.2857, "maximum" : 0.3333 }
      },
      {
         "index" : 34,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.2381, "maximum" : 0.2857 }
      },
      {
         "index" : 35,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.1905, "maximum" : 0.2381 }
      },
      {
         "index" : 36,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.1429, "maximum" : 0.1905 }
      },
      {
         "index" : 37,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.0952, "maximum" : 0.1429 }
      },
      {
         "index" : 38,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.0476, "maximum" : 0.0952 }
      },
      {
         "index" : 39,
         "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0476 }
      },
      {
         "index" : 40,
         "hscan" : { "minimum" : 0.9737, "maximum" : 1.0000 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 41,
         "hscan" : { "minimum" : 0.9474, "maximum" : 0.9737 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 42,
         "hscan" : { "minimum" : 0.9211, "maximum" : 0.9474 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 43,
         "hscan" : { "minimum" : 0.8947, "maximum" : 0.9211 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 44,
         "hscan" : { "minimum" : 0.8684, "maximum" : 0.8947 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 45,
         "hscan" : { "minimum" : 0.8421, "maximum" : 0.8684 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 46,
         "hscan" : { "minimum" : 0.8158, "maximum" : 0.8421 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 47,
         "hscan" : { "minimum" : 0.7895, "maximum" : 0.8158 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 48,
         "hscan" : { "minimum" : 0.7632, "maximum" : 0.7895 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 49,
         "hscan" : { "minimum" : 0.7368, "maximum" : 0.7632 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 50,
         "hscan" : { "minimum" : 0.7105, "maximum" : 0.7368 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 51,
         "hscan" : { "minimum" : 0.6842, "maximum" : 0.7105 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 52,
         "hscan" : { "minimum" : 0.6579, "maximum" : 0.6842 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 53,
         "hscan" : { "minimum" : 0.6316, "maximum" : 0.6579 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 54,
         "hscan" : { "minimum" : 0.6053, "maximum" : 0.6316 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 55,
         "hscan" : { "minimum" : 0.5789, "maximum" : 0.6053 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 56,
         "hscan" : { "minimum" : 0.5526, "maximum" : 0.5789 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 57,
         "hscan" : { "minimum" : 0.5263, "maximum" : 0.5526 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 58,
         "hscan" : { "minimum" : 0.5000, "maximum" : 0.5263 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 59,
         "hscan" : { "minimum" : 0.4737, "maximum" : 0.5000 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 60,
         "hscan" : { "minimum" : 0.4474, "maximum" : 0.4737 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 61,
         "hscan" : { "minimum" : 0.4211, "maximum" : 0.4474 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 62,
         "hscan" : { "minimum" : 0.3947, "maximum" : 0.4211 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 63,
         "hscan" : { "minimum" : 0.3684, "maximum" : 0.3947 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 64,
         "hscan" : { "minimum" : 0.3421, "maximum" : 0.3684 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 65,
         "hscan" : { "minimum" : 0.3158, "maximum" : 0.3421 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 66,
         "hscan" : { "minimum" : 0.2895, "maximum" : 0.3158 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 67,
         "hscan" : { "minimum" : 0.2632, "maximum" : 0.2895 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 68,
         "hscan" : { "minimum" : 0.2368, "maximum" : 0.2632 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 69,
         "hscan" : { "minimum" : 0.2105, "maximum" : 0.2368 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 70,
         "hscan" : { "minimum" : 0.1842, "maximum" : 0.2105 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 71,
         "hscan" : { "minimum" : 0.1579, "maximum" : 0.1842 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 72,
         "hscan" : { "minimum" : 0.1316, "maximum" : 0.1579 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 73,
         "hscan" : { "minimum" : 0.1053, "maximum" : 0.1316 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 74,
         "hscan" : { "minimum" : 0.0789, "maximum" : 0.1053 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 75,
         "hscan" : { "minimum" : 0.0526, "maximum" : 0.0789 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 76,
         "hscan" : { "minimum" : 0.0263, "maximum" : 0.0526 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 77,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0263 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
      },
      {
         "index" : 78,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.0000, "maximum" : 0.0476 }
      },
      {
         "index" : 79,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.0476, "maximum" : 0.0952 }
      },
      {
         "index" : 80,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.0952, "maximum" : 0.1429 }
      },
      {
         "index" : 81,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.1429, "maximum" : 0.1905 }
      },
      {
         "index" : 82,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.1905, "maximum" : 0.2381 }
      },
      {
         "index" : 83,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.2381, "maximum" : 0.2857 }
      },
      {
         "index" : 84,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.2857, "maximum" : 0.3333 }
      },
      {
         "index" : 85,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.3333, "maximum" : 0.3810 }
      },
      {
         "index" : 86,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.3810, "maximum" : 0.4286 }
      },
      {
         "index" : 87,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.4286, "maximum" : 0.4762 }
      },
      {
         "index" : 88,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.4762, "maximum" : 0.5238 }
      },
      {
         "index" : 89,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.5238, "maximum" : 0.5714 }
      },
      {
         "index" : 90,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.5714, "maximum" : 0.6190 }
      },
      {
         "index" : 91,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.6190, "maximum" : 0.6667 }
      },
      {
         "index" : 92,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.6667, "maximum" : 0.7143 }
      },
      {
         "index" : 93,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.7143, "maximum" : 0.7619 }
      },
      {
         "index" : 94,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.7619, "maximum" : 0.8095 }
      },
      {
         "index" : 95,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.8095, "maximum" : 0.8571 }
      },
      {
         "index" : 96,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.8571, "maximum" : 0.9048 }
      },
      {
         "index" : 97,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.9048, "maximum" : 0.9524 }
      },
      {
         "index" : 98,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
         "vscan" : { "minimum" : 0.9524, "maximum" : 1.0000 }
      },
      {
         "index" : 99,
         "hscan" : { "minimum" : 0.0000, "maximum" : 0.0263 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 100,
         "hscan" : { "minimum" : 0.0263, "maximum" : 0.0526 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 101,
         "hscan" : { "minimum" : 0.0526, "maximum" : 0.0789 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 102,
         "hscan" : { "minimum" : 0.0789, "maximum" : 0.1053 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 103,
         "hscan" : { "minimum" : 0.1053, "maximum" : 0.1316 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 104,
         "hscan" : { "minimum" : 0.1316, "maximum" : 0.1579 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 105,
         "hscan" : { "minimum" : 0.1579, "maximum" : 0.1842 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 106,
         "hscan" : { "minimum" : 0.1842, "maximum" : 0.2105 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 107,
         "hscan" : { "minimum" : 0.2105, "maximum" : 0.2368 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 108,
         "hscan" : { "minimum" : 0.2368, "maximum" : 0.2632 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 109,
         "hscan" : { "minimum" : 0.2632, "maximum" : 0.2895 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 110,
         "hscan" : { "minimum" : 0.2895, "maximum" : 0.3158 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 111,
         "hscan" : { "minimum" : 0.3158, "maximum" : 0.3421 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 112,
         "hscan" : { "minimum" : 0.3421, "maximum" : 0.3684 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 113,
         "hscan" : { "minimum" : 0.3684, "maximum" : 0.3947 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 114,
         "hscan" : { "minimum" : 0.3947, "maximum" : 0.4211 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 115,
         "hscan" : { "minimum" : 0.4211, "maximum" : 0.4474 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      },
      {
         "index" : 116,
         "hscan" : { "minimum" : 0.4474, "maximum" : 0.4737 },
         "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
      }
   ],

   "endOfJson" : "endOfJson"
}
Zuletzt geändert von Mumpel am 23. Apr 2016, 16:59, insgesamt 1-mal geändert.

b2un0
Moderator

Beiträge:1819
Registriert:16. Nov 2015
Wohnort:Hamburg
Beruf:Softwareentwickler

externe Geräte funktionieren

21. Apr 2016, 13:04

viewtopic.php?f=8&t=836

Beitrag #2 abarbeiten - ansonsten wir das nichts mit irgendwelcher Sinnvollen Hilfe.
Kein Support per PM!

Mumpel
Neuling

Beiträge:10
Registriert:21. Apr 2016

externe Geräte funktionieren nicht

23. Apr 2016, 17:12

sorry habe keine zeit gehabt

also putty gibt das aus

OpenELEC:~ # cd /storage/.config
OpenELEC:~/.config # killall hyperiond
OpenELEC:~/.config # LD_LIBRARY_PATH=/storage/hyperion/bin /storage/hyperion/bin
/hyperion-v4l2 --screenshot --frame-decimator 2 --size-decimator 4
V4L2 width=720 height=480
V4L2 pixel format=YUYV
V4L2 grabber signal threshold set to: {0,0,0}
V4L2 grabber started
V4L2 grabber stopped
OpenELEC:~/.config #


und der screenshot zeigt einfach schwarz

bekomme den grabber auch nicht unter win 10 zum laufen um zu schauen ob der nicht kaputt ist

b2un0
Moderator

Beiträge:1819
Registriert:16. Nov 2015
Wohnort:Hamburg
Beruf:Softwareentwickler

externe Geräte funktionieren nicht

25. Apr 2016, 10:19

Wie ist der TV an den Grabber angeschlossen? Mit SVIDEO oder AV(Gelb)?
Wenn du den Screenshot machst, was wird dann aktuell auf dem TV angezeigt?
Kein Support per PM!

Mumpel
Neuling

Beiträge:10
Registriert:21. Apr 2016

externe Geräte funktionieren nicht

25. Apr 2016, 12:14

Tv xbox Adapter auf av an scart
und dann av Kabel an den Grabber

wenn ich statt dem Grabber nen alten Video recorder dran hänge kann ich das laufende Programm aufnehmen

ich habe ZDF hd laufen

Mumpel
Neuling

Beiträge:10
Registriert:21. Apr 2016

externe Geräte funktionieren nicht

25. Apr 2016, 12:19

ich habe ein paar mal Screenshots gemacht einmal war schwarzes Bild mit einem dünnen grünen Streifen in der mitte

b2un0
Moderator

Beiträge:1819
Registriert:16. Nov 2015
Wohnort:Hamburg
Beruf:Softwareentwickler

externe Geräte funktionieren nicht

25. Apr 2016, 12:20

Du hast aber nicht Kodi auf dem TV aktiv während du den Screenshot machst, oder?
Kein Support per PM!

Mumpel
Neuling

Beiträge:10
Registriert:21. Apr 2016

externe Geräte funktionieren nicht

25. Apr 2016, 12:21

Nein das aktuelle tv Programm

Mumpel
Neuling

Beiträge:10
Registriert:21. Apr 2016

externe Geräte funktionieren nicht

26. Apr 2016, 19:05

habe den Grabber jetzt mal an den Videorecorder angeschlossen geht auch nicht also am tv liegts nicht

b2un0
Moderator

Beiträge:1819
Registriert:16. Nov 2015
Wohnort:Hamburg
Beruf:Softwareentwickler

externe Geräte funktionieren nicht

27. Apr 2016, 07:15

Poste mal bitte die Verkabelung vom Grabber zum angeschlossenen Gerät, entweder liegt hier noch ein Verständigungsproblem zwischen uns vor welches wir darüber evtl. lösen können oder der Grabber ist schlecht defekt.
Kein Support per PM!

Mumpel
Neuling

Beiträge:10
Registriert:21. Apr 2016

externe Geräte funktionieren nicht

28. Apr 2016, 22:01

uploadfromtaptalk1461873657409.jpg
ich habe gleich mal nen neuen Grabber bestellt mal schauen

Mumpel
Neuling

Beiträge:10
Registriert:21. Apr 2016

externe Geräte funktionieren nicht

29. Apr 2016, 15:22

der neue grabber funktioniert auch nicht immer noch schwarzes bild

cenyal
Mitglied

Beiträge:156
Registriert:25. Jan 2016

externe Geräte funktionieren nicht

29. Apr 2016, 18:53

Wenn ich richtig sehe ist der Cinchkabel an verkehrten Anschluß drin.

Kabel von Grabber an Gelb und oben auf Output einstellen.
Dateianhänge
Unbenannt.PNG
Unbenannt.PNG (73.83 KiB) 7450 mal betrachtet

Mumpel
Neuling

Beiträge:10
Registriert:21. Apr 2016

externe Geräte funktionieren nicht

29. Apr 2016, 23:48

bei dem xbox scart Adapter gibt es kein Input und output alles gleich

b2un0
Moderator

Beiträge:1819
Registriert:16. Nov 2015
Wohnort:Hamburg
Beruf:Softwareentwickler

externe Geräte funktionieren nicht

30. Apr 2016, 08:24

Das Ding hat aber keinen offiziellen "out" Support..
Das ist eigentlich nicht mal intern verkabelt, mir ist schleierhaft wie du damit am Videorecorder aufnehmen könntest.

Du brauchst für den Grabber einen richtigen (!) Scart out Adapter wie auf dem Bild!!
Kein Support per PM!

Zurück zu „Ambilight - Support“